Dodge D-15 fuel pump heat shield?

[Erwin]

Hi,

does anybody have an original heat shield for the fuel pump in the Dodge D-15 /T222?

Or at least a picture would be greatly appreciated...

Thanks,
Erwin

[motto]

Look at a Weapon Carrier Erwin, The T214/T223 heat shield would have to be similar if not identical. If there is any difference it would be in the holes needed to mount it and maybe clear a pulse chamber.

David

[Lynn Eades]

Some had the big pump and some the small one. I don't recall if both had the up stand stud to support the shield. I think the big pump set up had a hole in the shield so as to allow the removal of one of the valve holders. All just memory.

[Erwin]

Thank you gentlemen.
My pump has a stand up stud.
I am not aware that there was a big and a small pump. Just the "early" type standard fuel pump you would find on a WC 52 Dodge also.
As the stand up stud is lower ! than the bulge-like top cover air dome the shield must have a peculiar shape...

Will post a pic of my fuel pump later this day.

Greetings to the other side of the world;-)
Cheers
E

____________
Dodge WC 52
Dodge D-15
Studebaker US6 tractor
Ford GPW

[Lynn Eades]

Erwin as David said, it just pokes through a hole
Basically the heat shield is just a piece of plate, with a curve in it, that takes it from the mounting face of the pump, up over the top of the pump. It has one edge folded as a stiffener.