|
|
#1
12-02-07, 01:07
|
|||
|
|||
Lead on generator for sale
See my note at end of this thread --5000 watt 60 cycle ,4 cylinder tow behind military generator said to be in working order located in Bancroft area -owner asking $800- negotiable -PM me for owners name and phone no. -Greg Anderson
Last edited by greg anderson (RIP); 22-09-08 at 00:56. Reason: Further info end of this thread 
|
|
#2
12-02-07, 02:29
|
||||
|
||||
|
Re: Lead on generator for sale
Quote:
Is it on a trailer, or otherwise transportable?
__________________
PRONTO SENDS
|
|
#3
13-02-07, 01:33
|
|||
|
|||
|
Jon - This unit sits on trailer type wheels and I think it could simply be towed away -I am not too familiar with it and I have PMed you so you can talk with the owner - Greg
|
|
#4
14-02-07, 21:26
|
||||
|
||||
|
I spoke with the gentleman who has this unit for sale.
I did have my hopes up that it was the 9kva unit as shown in Greggs book, the one powered by the jeep engine and tailer mounted, but no... It is a 5000kw 120/208v stationary model powered by a Continental 4cyl engine. It is trailer mounted albeit on a home built civvy trailer. The fellow didn't have the specifics on hand as to what model this is. Any ideas out there???
__________________
3RD Echelon Wksp 1968 M274A5 Mule Baifield USMC 1966 M274A2 Mule BMY USMC 1958 M274 Mule Willys US Army 1970 M38A1 CDN3 70-08715 1 CSR 1981 MANAC 3/4T CDN trailer 1943 Converto Airborne Trailer 1983 M1009 CUCV RT-524, PRC-77s, and trucks and stuff and more stuff and and....... OMVA, MVPA, G503, Steel Soldiers
|
|
#5
14-02-07, 23:21
|
||||
|
||||
|
Quote:
__________________
SUNRAY SENDS AND ENDS :remember :support
|
|
#6
15-02-07, 00:38
|
|||
|
|||
|
What I got from him was:
- ex Canadian Miitary believed 50s or 60s manufacture - skid mouint generator on home made trailer (hasn't moved much in 20 years) - Output - he said 5KW once then later 10KW single/3 phase - 4 cylinder Continental governed at 3600 RPM, when last run it would start, then shut down once warm. This was the pattern a year or two ago, he is now using a diesel generator for powering whatever this used to be used for. - weight guessed at 700 lb. - he says that the data plates are present to clarify build date, model, output. Present owner seems to have had the generator for about 20 years.
|
|
#7
15-02-07, 04:09
|
||||
|
||||
|
hi guy's
i wouldn't write this off as non military just yet. there was a guy down here who had a trailer mounted gen set which was continental powered. unfortunately, all data plates were missing from the unit. it was mounted on a single axel trailer probably rated for 2 tons at least. it had a full sheet metal enclosure with flip up inspection doors on each side. the engine reminded me of a continental n62 same as could be found in a mid 50's massey harris pony tractor. mike
|
|
#8
15-02-07, 16:42
|
|||
|
|||
|
generator
Data plate is on this unit -shows stock no.FSN61156281243 Serial 3098 manufacturer HOL-GEN ,Model CE55AC/WK6 ,contract no.DA-11-184-ENG 16073 inter alia -Greg
|
|
#9
15-02-07, 20:23
|
|||
|
|||
|
Just looking by the stock number and the contract number, it is of american design and build.
I have several dozen(s) of generator manuals from the 60s and 70s....I was not able to find this particular generator. That is not to say it wasn't used by Canada mind you. By the way, if anyone needs specific manuals for generators like the 4.2K, the 5K , the .5K, the 1.5K, etc, drop me a line.
|
|
#10
22-09-08, 00:53
|
|||
|
|||
|
Generators at give away prices
Generator on this thread still for sale at give away price -owner also has a 1 cyl Wisconsin 110 v. gen on skid in cage 3KW well metered clearly ex mil for very low price -PM me for owners contact info -Greg
|
 |
|
|
Linear Mode
