Lower Engine Cowling

[Adrian Mamzer]

Hi everyone!
Can anyone help me? I need sizes of the lower engine cowling:
/CTL 7228C R.H, CTL 7229 L.H, CTL 7237C R.H and CTL 7227C L.H/.
Regards, Adrian.

[JBizal]

Midwest Military makes new panels.
John

[rob love]

I'll throw a plug in for Midwest as well. It is not just a matter of cutting some rectangular panels. The top edge is folded, there is the odd crease built in to one or two of them, and the placement of the holes and cuts are quite crucial. Then you have the welded washers on the upper holes. As well, there is the placement of some felt near the rad.

If you have a set sitting of originals right in front of you, then perhaps it's easy enough to copy. But to do it from a set of drawings over the internet might be a little problematic.

[JBizal]

The front panels have an emboss in them for the motor mounts as well.
John

[Lynn Eades]

Hi John, I don't understand your post?
Adrian, here are some pictures of a MkI* shroud assy.

[Michael R.]

John is refering to the lower engine covers. Lynn is refering to the fan cowl plates. Adrian posted the part numbers ... as often a reply will ask for clarification by posting the part numbers ... Right church, wrong pew.

[JBizal]

Sorry, I thought the comment was about the lower engine panels, not the fan components.

John

[Lynn Eades]

Why couldn't I work that out! Sorry John. Thank you Michael R