Go Back   MLU FORUM > MILITARY VEHICLES > The Softskin Forum


Thread Tools Display Modes
Old 23-01-18, 01:25
Lar Dowding Lar Dowding is offline
Registered User
Join Date: Aug 2016
Location: England
Posts: 13
Default Transfer box seal

On the output shaft to the front axle there is a double lipped seal, I thought I had bought l the seals needed todo the hole box but not this one. Can some point me in the direction of a seal number.
Lar Dowding
Stroud, Gloucestershire England
Reply With Quote
Old 29-01-18, 23:08
Jacques Reed Jacques Reed is offline
VMVC & Early Ford V8 Club
Join Date: Jul 2012
Location: Victoria Australia
Posts: 819
Default Transfer box oil seals

Hi Lar,

I replaced mine a long time ago but sadly can't find the information you need.

If you go to a good bearing and oil seal supplier with a sample you should be able to get a good match however.

If no original sample is available, measure the diameter of the recess in which the seal sits (outside diameter), the depth of that recess (thickness), and the diameter of the yoke which rotates in that seal (inside diameter).
With that information, a good supplier should be able to find you the right seal by checking his catalogues and cross references.

It may help speed up the search to have the dimensions in Imperial and metric sizes as the originals would have been made Imperial sized. Older catalogues may only have Imperial sizes listed.

Also consider installing Speedi Sleeves on the yoke if the surface is rough at the seal contact area. Saves chewing out a new seal when you install it.
Hope this is if some help.

F15-A 1942 Battery Staff

Jacques Reed
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
For Sale: oil seal C01UC105387 Rick DeBruyn For Sale Or Wanted 1 09-05-17 20:33
BB-1175 C seal wanted Michael R. Parts/Sources/Prices 4 27-10-13 00:24
Axle oil seal shaun The Carrier Forum 10 11-12-11 07:54
Outer Oil Seal?? rossbart The Carrier Forum 3 21-10-09 00:45
hub seal Ken Hughes The Restoration Forum 6 09-01-06 03:00

All times are GMT +2. The time now is 08:07.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2023, Jelsoft Enterprises Ltd.
Copyright © Maple Leaf Up, 2003-2016