|
|
#1
08-12-10, 11:40
|
||||
|
||||
Speedo drive spindle and diff adapter
Right just trying to dismantle my speedo cable so i can send marc the adapter bolt that screws into the diff case that he needs to copy and the drive spindle too. I cannot see how you get the spindle off the speedo cable, anyone able to tell me how to strip it down without braking something ?
Cheers Richie
__________________
is mos redintegro __5th Div___46th Div__ 1942 Ford Universal Carrier No.3 MkI* Lower Hull No. 10131 War Department CT54508 (SOLD) 1944 Ford Universal Carrier MkII* (under restoration). 1944 Morris C8 radio body (under restoration). 
|
|
#2
08-12-10, 19:08
|
|||
|
|||
|
Rich
The cable is round with a tab on the side that fits in a slot in the side of the drive gear hole. It should just pull out.
__________________
Bluebell Carrier Armoured O.P. No1 Mk3 W. T84991 Carrier Bren No2.Mk.I. NewZealand Railways. NZR.6. Dodge WC55. 37mm Gun Motor Carriage M6 Jeep Mb #135668 So many questions....
|
|
#3
08-12-10, 20:12
|
||||
|
||||
|
Right thanks again Lynn (and for me carb thread) i didnt want to "yark it" incase it was screwed in or something.. it is well stuck so will leave it in a pot of diesle over night. the good news is the toothed section of the spindle is spot on so its nice to know something was not worn on the old girl
__________________
is mos redintegro __5th Div___46th Div__ 1942 Ford Universal Carrier No.3 MkI* Lower Hull No. 10131 War Department CT54508 (SOLD) 1944 Ford Universal Carrier MkII* (under restoration). 1944 Morris C8 radio body (under restoration).
|
 |
|
|
Linear Mode
