#1
|
|||
|
|||
Wanted
Howdy chaps,
put my flatty in to the carrier the other day and discovered that a truck oil pan is too deep to fit and the motor sits about 2" too high on the motor mounts. So does anyone have a carrier oil pan lying around they would part with? Sean
__________________
1944 Allis Chalmers M7 Snow Tractor 1944 Universal Carrier MKII M9A1 International Halftrack M38CDN 1952 Other stuff |
#2
|
|||
|
|||
Re: Wanted
Quote:
Barring a new one ,section it...Cut a couple of inches all the way around and mig it back together...cut it 1/2" BELOW THE LIP AND THEN CUT 2"'S OUT ALL THE WAY AROUND AND REWELD IT BACK TOGETHER,MAKING SURE THE INSIDE IS CLEAN BEFORE YOU PUT THE PAN BACK ON.. Have to change the pick up height on the oil pump and the dip stick length and oil limit marks..then if your crank clears you should be away.
__________________
Alex Blair :remember :support :drunk: |
|
|