Any interest

[Lynn Eades]

Hi Chris. Carrier mirror (CMP range)and (carrier specific) gear knob with different change pattern.

[Ganmain Tony]

Originally Posted by ferret

We have mirrors!

Can somebody post a pic of correct mirrors, so I check we have the correct type.

Chris

Unfortunately it's in bits for repair but here's an example. Mirror glass is convex as well.

[Grant Bowker]

Originally Posted by Bob Carriere

The New Departure 926 in a tin can soaking in oil.
Bob C

Close Bob, but no cigar. The C60S manual gives New Departure number 928 for the Pivot Pin Bearaing Assembly (in parts group 6.106) with ford equivalency C01Q3123B shown. And here's a link to a previous thread discussing more alternative part numbers. http://www.mapleleafup.net/forums/sh...eering+bearing

[Alex van de Wetering]

We have mirrors!

Excellent Chris.

Attached is another pic of the typical CMP mirror (pic from the forum). One of the tell-tale details are the four screws on the backplate.
I have been looking for these for quite some time and I know others have as well.

EDIT: I see Lynn has already posted the same pic, my bad.

Alex

[rob love]

Do they not have ebay where all these parts are stored? Or do the owners not know the value of these items to certain "fringe" collectors?

[chris vickery]

A guy on eBay could retire from that find...

[Matt Austin]

Good grief!

[Arthur Morel]

Originally Posted by ferret

Ford dash switches

Price and post to New Zealand please

[Arthur Morel]

Hi any overflow bottles for ford cmp f30, mirrors, black out covers x2, full set :thuptoggle switchs ford and a cost for post to new zealand please

[ferret]

Hi,

I will get a good selection of spares in the next container. I won't be able to work out prices until they arrive here in the UK.

They do know the value of the spares and don't seem to be in any rush to sell them. They have owned them for at least 40 years. Obviously I will have to take into account shipping cost and import duty port charges etc.

I should get a photo of the mirrors tomorrow.

If anyone is interested in any of the vehicles let me know.

Chris

[David Hardway]

Keen on a pair of Headlights and a second set of Blackout covers plus 2 sets of mirrors

Thanks

Dave

[David Dunlop]

Terrific find, Chris! Makes one wonder just how many more of these treasure troves of CMP Spare Parts are still tucked away in all the various countries that purchased large quantities of the CMP's etc. post war. The big players like Pounds and Levys are long gone now, but there are probably a lot of smaller operations off the beaten track, with significant, yet to be discovered quantities of NOS spares.

Congrats!


David

[Doug Lavoie]

Chris,
If you find the shift knobs that belong to a carrier, as shown in picture 3 of #31 on this page (2), I would like 2 please if available.
Great find, you must be still trying to take it all in. Good luck, and ... a very lucky find.
I hope all can benefit from your good fortune. Will be following this thread or any other related to this for further progress.
Doug

[Mathew Smith]

Hi Chris i would be keen on some parts black out covers tail
Lights etc also if you happen to come across any of the instuction plates for the engine cover or wheel cylinder kits for f15 front wheel please let me know i am in new zealand

[Arthur Morel]

Hello i am after a over flow bottle , mirrors, toggle switchs and plates data plates, rifle holders, tyer pump, oil air cleaner,can you please get back to me ardiescmp@gmail.com

[Hanno Spoelstra]

Originally Posted by ferret

I found these on a recent visit to South America. They have had the front axles removed, but I have located 3 replacements.

There are 3 of these tractors.

Chris,

Did you happen to ship one (or all three) of these rare beasts to the UK, perchance?

Hanno

[jakob]

It's a ford......