#1
|
|||
|
|||
Chev C8 IA2 Hoops (boughs, rear frame etc)
Hi all,
Happy new year! I'm now in the position to make up the hoops (boughs or whatever they are called!) for the rear body on my C8 (its a 1A2 type) I seem to recall some drawings or plans on a thread on here, with some dimensions, but I cant find it! Does anyone have any plans or dimensions? I'm thinking I will make it out of galvanised electrical conduit. I'm not going to make the drop down legs as I cant see I'd ever use it as a tent! Once made up I can start looking for canvas! Richard |
#2
|
||||
|
||||
Frame
Richard
Cletrac measured his 1A1 frame . I have the details will post the pics here for you. The hoops are made from plumbers style pipe about 27mm diameter. Think the pics are already in thread on MLU somewhere
__________________
1940 cab 11 C8 1940 Morris-Commercial PU 1941 Morris-Commercial CS8 1940 Chev. 15cwt GS Van ( Aust.) 1942-45 Jeep salad Last edited by Mike Kelly; 14-01-19 at 21:49. |
#3
|
||||
|
||||
The top bows are in this thread.
__________________
1940 Cab 11 C8 Wireless with 1A2 box & 11 set 1940 Cab 11 C8 cab and chassis 1940 Cab 11 C15 with 2A1 & Motley mount & Lewis gun 1940 Cab 11 F15A w/ Chev rear ends 1941 Cab 12 F15A 1942-44 Cab 13 F15A x 5 1942 cab 13 F15A with 2B1 box 1943 cab 13 F15A with 2H1 box 1943 Cab 13 C8A HUP 1944 Cab 13 C15A with 2C1 box 1943 Cletrac M2 High Speed Tractor MkII Bren gun carrier chassis x 2 |
#4
|
|||
|
|||
trivia: "Hoopstick"
GM and Ford CMP parts books generally did not cover the rear bodies since they were made by various sub-contractors. There was a Body Parts List for D.N.D. Special Pattern Bodies to describe all of the body parts not dealt with in the usual parts books. The individual bows were described either as "Hoopsticks" or where there were more complicated cross bars etc then the entire assembly was call a Superstucture. It appears that if there were extensions or legs attached to the horizontal curved bow then the bow part was described as "bow, hoopstick". "Unfortunately the last D.N.D. Body Parts List that I have seen is dated October 1941 so only deals with early CMP's. Maybe a later version has been spotted by others?
|
#5
|
|||
|
|||
There was a January 1942 revision to the October 1941 Body Parts List. Unfortunately, it isn't clear what the revision comprised. Minor corrections? Complete added section(s)? I don't have any idea. I suppose there may have been more, late revisions (again, I don't know).
|
#6
|
||||
|
||||
Dimensions
Richard needs the dimensions . Measurments in inches .
__________________
1940 cab 11 C8 1940 Morris-Commercial PU 1941 Morris-Commercial CS8 1940 Chev. 15cwt GS Van ( Aust.) 1942-45 Jeep salad |
#7
|
|||
|
|||
Many thanks everyone. For reference my little C8 is a 1941.
I thought I had seen some plans/drawings on here, thanks for pointing them out. There's a couple of good photos on the RC Signals site: http://www.rcsigs.ca/index.php/File:...y_Photo_12.jpg |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
CMP Chev rear tranny seal..... | Bob Carriere | Auction and Classified Ad Site Heads Up | 4 | 16-02-18 05:07 |
Chev rear main oil seal | Wayne Henderson | The Restoration Forum | 5 | 10-10-10 05:28 |
GMC Rear Tray Hoops | malcolm erik bogaert | For Sale Or Wanted | 0 | 03-05-10 21:48 |
GAZ- AA - rear canvas hood frame | Larry Hayward | The Softskin Forum | 36 | 13-12-06 00:17 |