#1
|
|||
|
|||
LP Carrier Brake Rod Boot
Hi all,
Need photos and measurements of the rubber boot that covers the brake rod as it exits the rear hull plate on an LP carrier. I have some Ford Brake Master Cylinder boots that I think may do the trick. Cheers.
__________________
1967 Land Rover Plant Repair Vehicle 1941 Matchless G3L 194? Wiles Junior Trailer 1941 Morris Commercial CS8 |
#2
|
|||
|
|||
I have one
Alex there is one on the back of mine, I'm back from Waiouru, home this weekend
|
#3
|
|||
|
|||
power steering rack & pinion boots
I have heard that there are some power steering rack & pinion rubber boots that fit and do the job very well. Not sure what vehilce, maybe a morris minor???
This may have been on MLU a couple of years ago. I would check out a mechanical company or parts catalouge to see what will suit. |
#4
|
|||
|
|||
Sweet as Lew, I'll drop round and check it out. I remember seeing it, but didn't have my trusty verniers with me, and didn't really care at that time
__________________
1967 Land Rover Plant Repair Vehicle 1941 Matchless G3L 194? Wiles Junior Trailer 1941 Morris Commercial CS8 |
#5
|
|||
|
|||
Guys
I think it is a standard master cylinder boot.
__________________
Bluebell Carrier Armoured O.P. No1 Mk3 W. T84991 Carrier Bren No2.Mk.I. NewZealand Railways. NZR.6. Dodge WC55. 37mm Gun Motor Carriage M6 Jeep Mb #135668 So many questions.... |
#6
|
|||
|
|||
Boots
I have used the boots from the K4X master cylinder kit that I use for the Chev PJ.
Rob ps joined the 21st century today with broadband at last! |
|
|