Wanted: 25 PDR lunette

[CWO (ret) Gilles Aubé]

We are looking for a travelling lunette for one of our 25 pdr MKII.
Gilles

[rob love]

https://www.lwdparts.com/product/tra...5pr-field-gun/


I needed a pair of lunnettes for the two guns I picked up, and bought them from the link above. There was a difference in the style of nuts, but the rings themselves were identical to the Canadian version.



If your ring is worn, you can also take the old assembly to a trailer place who can cut the ring off and weld a replacement ring onto the bracket.

[Bob Phillips]

I believe I mày have one, it has a slightly different plate or bracket just behind the hook or eye. I will see if I can find it a post a photo.
BP

[CWO (ret) Gilles Aubé]

Originally Posted by Bob Phillips

I believe I mày have one, it has a slightly different plate or bracket just behind the hook or eye. I will see if I can find it a post a photo.
BP

Please let me know if you one or not?
Gilles

[rob love]

I think by the time they got here (I had to buy 2) it came out to about $220 total, so each of them came out to about $110 with shipping.

Are you missing one, or is it just worn out? I have my old ones that could be repaired by welding new rings on them, but by the time you did that, you would just about equal the ones at LWD.

[CWO (ret) Gilles Aubé]

ROB It is our original gun that we are pulling for the last 15 years.
I was told not to have it welds because it not good for the hardening of the metal.
Gilles

[CWO (ret) Gilles Aubé]

Originally Posted by rob love

https://www.lwdparts.com/product/tra...5pr-field-gun/


I needed a pair of lunnettes for the two guns I picked up, and bought them from the link above. There was a difference in the style of nuts, but the rings themselves were identical to the Canadian version.



If your ring is worn, you can also take the old assembly to a trailer place who can cut the ring off and weld a replacement ring onto the bracket.

Rob, do you remember the cost of transport?
Gilles