#1
|
|||
|
|||
CMP CAB#13 parts
Hey guys! I’m a newbie when it comes to CMP’s but I recently purchased a C15A
I’m from Ontario Canada, I’m now trying to hunt down some cab parts like doors, doghouse etc.. Is there anyone out there that can steer me in the right direction for some decent used parts? I quickly figured out these are much more rare than my M37’s so I would greatly appreciate any help at all. I’m a serious buyer. Thanks in advance! |
#2
|
|||
|
|||
Welcome to the asylum......
Where are you located in Ontario....location can make a big difference.
...and pictures as a lot of us are illiterate..... lots of pictures.... will try to help you out as best we can...... lots of knowledgeable members on the forum. What are your plans?? How much do you need???? How rich are you?? do you have a good looking sister??. Mark April 6th on your calendar for the flea market in Georgetown. Hope to cross path in the future. Bob C
__________________
Bob Carriere....B.T.B C15a Cab 11 Hammond, Ontario Canada |
#3
|
|||
|
|||
I’m in Port Colborne, I’m willing to travel when it comes to parts!
Thanks for the heads up in regards to the swap meet! I will be there for sure. Thank Bob! |
#4
|
|||
|
|||
Well you are near the belly button of CMP world.
Lots of members and parts in the GTO area.
Now where are the Pictures????
__________________
Bob Carriere....B.T.B C15a Cab 11 Hammond, Ontario Canada |
#5
|
|||
|
|||
Pics coming soon!!........ don’t laugh too hard!!😬
|
#6
|
|||
|
|||
First time on the forum, wasn’t able to upload any pics...tried a couple times but came up as an error each time.😐
|
#7
|
|||
|
|||
You need to post five time.....
before you are allowed.....
How cold is it on port Colborne???
__________________
Bob Carriere....B.T.B C15a Cab 11 Hammond, Ontario Canada |
#8
|
|||
|
|||
Ok got it!! Better keep yaking I guess!
It’s -13C here now, took awhile to get here but winter finally came!😐 What about Hammond? |
#9
|
|||
|
|||
Bitching cold....
....can't see the thermometer it is covered with a woolen scarf....
__________________
Bob Carriere....B.T.B C15a Cab 11 Hammond, Ontario Canada |
#10
|
|||
|
|||
Dang!! Must be freakin cold then!! 😂
|
#11
|
|||
|
|||
Still no luck uploading pics!, try again tomorrow I guess.
Thanks Bob. |
#12
|
|||
|
|||
They are likely too large....run them on photo editor to under 1600 pixels in length or 1.5mb in size.
Last edited by rob love; 28-01-19 at 04:52. |
#13
|
|||
|
|||
Cab 13 parts
David,
Check your PM's for details on a long list of NOS CMP parts and manuals. ……. Brian |
#14
|
|||
|
|||
I’m such a newbie!!😳 My PM’s???
Sorry Brian. Thanks! |
#15
|
|||
|
|||
PM= Private message. If you go to the top right of this page you will see a blue Private Messages link. Click on that.
|
#16
|
|||
|
|||
It’s showing 0 private messages.😐
|
#17
|
|||
|
|||
I’ll send you a PM.
|
#18
|
|||
|
|||
Thanks Brian, I just received the email.
|
#19
|
|||
|
|||
David,
The email I sent you is going to you blindly through the MLU Personal Messages system : I do not know your actual email since is it protected by MLU. You need to respond to me. Then I can send you my list as an attachment to an email. All of this allows users of the Forum to keep spammers at bay and not openly reveal there email address for robots to harvest. ……. Brian |
#20
|
|||
|
|||
Finally back from working in China!
Hey guys sorry for the long silent period.
I’m hoping someone can tell me whether or not the front bumpers are the same on Chev and ford CMP’s with #13 cab?? Thanks in advance! |
#21
|
|||
|
|||
Some slight differences......
You are working on a C15a Chev....... you can buy a brand new piece of 5 inch C channelCORRECTION 6 INCH .....identical to original CMP bumper......have it cut to size and drill your own hole.
Do you have a chewed up bumper to copy from or is it missing completely?? Do you have the radiator guard.....? Don't think we have seen your beast photograph yet. Make a detailed list of what you are looking for..... a lot of us have spares. Fair weather is just around the corner......don't dare say Spring is here has we had some snow flakes coming down yesterday. Are you aware of the Lindsay and Sterling auto flea market this coming weekend. Good luck
__________________
Bob Carriere....B.T.B C15a Cab 11 Hammond, Ontario Canada Last edited by Bob Carriere; 30-04-19 at 02:23. |
#22
|
|||
|
|||
1944 cmp
|
#23
|
|||
|
|||
Not 6"??? 5" is for HUPs.
Quote:
|
#24
|
|||
|
|||
Nice looking vehicle, David.
Is there a small, squarish metal patch top, right rear of the cab, to the right of the rear window? If so, you may have a cab and chassis assembly from a Wireless Truck. David |
#25
|
|||
|
|||
Chev cmp
Thanks David, Yes you are correct, the ID tag says the model is a C15A-WIRE-5. I’m not clear on the primary purpose for a wire truck though!😊
I am very pleased with the condition, spent most of its life in a airplane hanger in Winnipeg. It’s been robbed of a few parts though so I’m looking for: Complete front bumper with the rad guard. Complete doghouse Rear window trim piece. So if anyone could help me out it would be greatly appreciated! Thanks. |
#26
|
|||
|
|||
For your engine cover - how are your sheet metal skills?
Phil Waterman has been kind enough to post drawings of the Cab 13 Chevrolet engine cover at https://www.canadianmilitarypattern....20Drawings.htm |
#27
|
||||
|
||||
Hi David.
Welcome to the CMP club. There are a few of us working on C15a’s in the area. This is Robert Bergeron’s Wire-5 truck. Wire is just short form for wireless.
__________________
Jordan Baker RHLI Museum, Otter LRC C15A-Wire3, 1944 Willys MB, 1942 10cwt Canadian trailer |
#28
|
|||
|
|||
Thanks Grant,Jordan and all who are filling in the blanks for me.😊
Great stuff! Anyone with a bumper, rad guard and rear window trim I will gladly buy them knowing it would be more of a huge favor rather than a money thing. Thanks All! |
#29
|
||||
|
||||
David, I should have bumper, engine cover and rad guard. Send me a PM and I can have a look.
Cheers, Barry |
#30
|
|||
|
|||
Is this the window trim you're looking for?
This is on the roof that got hit by a tree - the piece is a little twisted and there is some rust, but could probably be straightened and used. It's yours if you want it, but you'll probably have to drill out the screws. I'm in Fort Erie. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
For Sale: Iltis and MV willys parts, M60 cradle and .50 parts etc | garmack | For Sale Or Wanted | 6 | 13-04-12 01:32 |
TRADE; 2X Original Ford CMP parts manuals for Willys MB Spare parts list M440-W101 | Jean | For Sale Or Wanted | 0 | 14-07-08 02:57 |
Parts....switches and other CMP UC parts.... | Bob Carriere | Auction and Classified Ad Site Heads Up | 4 | 23-03-08 04:17 |
FOR TRADE, CMP FORD ill. army parts cat + sp. parts list F60 FOR Cdn MB parts list | Jean | For Sale Or Wanted | 0 | 26-08-06 22:32 |