MLU FORUM  

Go Back   MLU FORUM > MILITARY VEHICLES > The Restoration Forum

Notices

Reply
 
Thread Tools Display Modes
  #1  
Old 20-03-14, 02:33
Peter Duggan Peter Duggan is offline
Registered User
 
Join Date: Apr 2011
Location: Cherry Valley, ON
Posts: 548
Default Lynx II, hull # 4225

I have just brought home a Lynx II with a build date of November 44. The Lynx will be a long term restoration project and I will be seeking lots of advice and potential sources of parts from fellow MLU members.

The machine was cut in half when it was "demilitarized" and is missing both fuel tanks and the armoured sponsons that contain them. Well weathered and rusty, but other than that it is relatively intact.

I wish to thank all the members of MLU who encouraged my dream to find a CMP project and Giorgio for making it happen.

Peter Duggan, Cherry Valley, ON

Click image for larger version

Name:	photo - Copy (2).jpg
Views:	65
Size:	76.1 KB
ID:	64351
Reply With Quote
  #2  
Old 20-03-14, 06:09
super dave super dave is offline
Dave Good
 
Join Date: Dec 2003
Location: Onoway, Alberta, Canada
Posts: 683
Default

Will be looking forward to your rebuild
Reply With Quote
  #3  
Old 20-03-14, 10:21
lynx42 lynx42 is offline
Rick Cove
 
Join Date: Jan 2007
Location: Paynesville, AUSTRALIA
Posts: 1,863
Default

Peter, Congratulations on your Lynx and welcome to the Lynx Owners Club.

There are not too many of us out there. In fact I would like to know just how many belong to MLU members ( or others as well.)

You have listed the hull number as 4225. There has been a bit of discussion lately as to the actual number built and the answer seems to be 3255.Click image for larger version

Name:	Can-Lynx-1-DennisBerkin.jpg
Views:	18
Size:	70.5 KB
ID:	64363

So I am interested in coming to the correct number made and how your hull is 970 above the suggested number.

My Lynx is a Canadian Scout Car Lynx I MkIII* Hull number 1726 built April 1943. It was the last registered of the 170 which came to Australia during WWII. ARN 123980.We have just about finished the restoration and I am about to put up a thread on the restoration.

Regards Rick
__________________
1916 Albion A10
1942 White Scoutcar
1940 Chev Staff Car
1940 F30S Cab11
1940 Chev WA LRDG "Te Hai"
1941 F60L Cab12
1943 Ford Lynx
1942 Bren Gun Carrier VR no.2250
Humber FV1601A
Saracen Mk1(?)
25pdr. 1940 Weir No.266
25pdr. Australian Short No.185 (?)
KVE Member.
Reply With Quote
  #4  
Old 21-03-14, 07:24
Doug Lavoie Doug Lavoie is offline
Registered User
 
Join Date: Dec 2005
Location: Beaumont, Alberta
Posts: 205
Default

Pete,
Great to see you have the Lynx safely tucked away. You are among a great group of people. Hope the project brings you many hours of fun and enjoyment.
Doug
Reply With Quote
  #5  
Old 21-03-14, 07:30
rob love rob love is offline
carrier mech
 
Join Date: Feb 2003
Location: Shilo MB, the armpit of Canada
Posts: 7,517
Default

A very nice piece. I am envious. Congrats.
Reply With Quote
  #6  
Old 22-03-14, 04:28
Rob Fast Rob Fast is offline
Registered User
 
Join Date: Feb 2003
Location: Manitoba Canada
Posts: 851
Default Congatulations on bring this one back to Canada

All I can say is beautiful. Cheers Rob Fast
__________________
1942 C8A- HUW " Wireless Nipper"
1943 F-60S LAAT and 1939 Bofors
1942 C8 Wireless
1943 FAT/ 17 pounder
1941 C15 GS 2B1
Reply With Quote
  #7  
Old 22-03-14, 20:25
David Dunlop David Dunlop is offline
Registered User
 
Join Date: Feb 2006
Location: Winnipeg, MB
Posts: 3,384
Default

Nice find, Peter.

Was the frame cut as well, or just the hull and how wide of a slice did they take out of it?


David
Reply With Quote
  #8  
Old 23-03-14, 02:44
Peter Duggan Peter Duggan is offline
Registered User
 
Join Date: Apr 2011
Location: Cherry Valley, ON
Posts: 548
Default

Dave,

The frame was cut as well as the hull. Doesn't appear to be much missing material. I've started to remove and tag all the exterior items. Surprisingly a fair number of the bolts yield without too much effort. Once the frame is stripped, I'll be able to decide to repair or perhaps replace. Long ways to go yet.

Peter
Reply With Quote
  #9  
Old 23-03-14, 05:22
rob love rob love is offline
carrier mech
 
Join Date: Feb 2003
Location: Shilo MB, the armpit of Canada
Posts: 7,517
Default

I did a fair bit of work on the Lynx in the Shilo collection. For the most part, the Lynx is not that different from working on a truck of that vintage. It is one of my favorite vehicles to drive out of the collection, and that says a lot. Hopefully a Lynx is in my future, but then again I have so many projects underway now I don't know in which decade I would fit it in.

Unless you happen to find a frame somewhere, I would suggest removing the hull and fishplating/welding the frame. I think the hull will add a lot of structural integrity to the frame, even if it wasn't 100% up to scratch.
Reply With Quote
  #10  
Old 23-03-14, 06:00
Michael R. Michael R. is offline
Registered User
 
Join Date: Jun 2011
Location: Canada
Posts: 1,154
Default

Regards the hull number 4225, and the published images showing what some suggest is the highest production number of 3255: does anyone know if the number 3255 shown in the Milestone image is a production number, not related to a hull or serial number?

Where did the serial numbers start, i.e.: 1000? Are there any existing original, unaltered data plates that display a hull number, serial number and engine number with a month and year of production? Could a hull have a number 4225, but was actually produced as the 3225th vehicle off the line?

I ask, as about the same time the last of the Ford Canada built MK-II* Universal Carriers were in production. Although the Milestone image of the last Universal Carrier is displayed as being in the 28,9XX range, there are multiple examples of original data plates of Ford Canada MK-II* Universal Carriers for a British contract with serial numbers well above the Milestone 28,9XX 'last U.C.' produced number.

Do not confuse Ford Canada Universal Carrier production with Ford Canada Windsor Carriers, the latter being produced through April, 1945.

IIRC, years earlier an MLU contributor wrote that T-16 U.C.'s started their serial numbers at 1,000. Was that Rod S. in AZ? Could the same practice have existed for the Lynx? We know it did not for the Ford Canada Universal Carriers MK-I*.
Reply With Quote
  #11  
Old 23-03-14, 10:44
lynx42 lynx42 is offline
Rick Cove
 
Join Date: Jan 2007
Location: Paynesville, AUSTRALIA
Posts: 1,863
Default

Micheal R. here is the parts book which confirms that the numbers started at Number 0001.
Click image for larger version

Name:	scan0373.jpg
Views:	14
Size:	128.3 KB
ID:	64419 Click image for larger version

Name:	scan0374.jpg
Views:	12
Size:	117.5 KB
ID:	64420

The earliest Lynx I. that Australia received seems to be Hull No.240 with (Army Registration Number) ARN 123833. The first 15 are listed with just the engine number.(The first ARN. No123810 to ARN No.123824) and the latest Hull No.2025. ARN.123970. The hull numbers are all over the place. Just as they drove in the gate off the ship I think.

The last one listed in the ARN. books is Hull No. 1726 Serial No. 1726 and ARN.123980. That one is mine. There are another 30 spaces unfilled as if they were waiting for a further shipment. Maybe Mike C. can answer that one.

The identification Plate gives the Model. - Serial ID No.- Hull No.- Engine No. and build date with the month and year.

Click image for larger version

Name:	scan0375.jpg
Views:	16
Size:	124.8 KB
ID:	64417 Click image for larger version

Name:	scan0376.jpg
Views:	35
Size:	80.8 KB
ID:	64418

Above are 3 of my Lynx plates. The Identification Plate, The gear Change and info plate and the WARNING plate. The Warning plate is fixed on the drivers hatch immediately next to his right eye.

Peters Lynx may not have this plate as it has the later diffs with the 8 stud wheels and no armoured roof. the earlier 6 stud axles were a problem as they were too weak.

The 4th one, not pictured, is the Publication plate afixed to the book holder near to the drivers right knee.

The Hulls were built by International Harvester and fitted to Ford chassis. There will be an IHC stamp on the flat horizontal piece immediately in front of the armoured vertical windscreen on the right hand side, right near the outer edge. The Serial Number, Ford Stamp and build date is right near the edge on the LEFT side of the horizontal plate.


Hope that this helps although it does not explain how Peter has a Lynx with the Hull No 4225 if there were only 3255 built.

Regards Rick.
__________________
1916 Albion A10
1942 White Scoutcar
1940 Chev Staff Car
1940 F30S Cab11
1940 Chev WA LRDG "Te Hai"
1941 F60L Cab12
1943 Ford Lynx
1942 Bren Gun Carrier VR no.2250
Humber FV1601A
Saracen Mk1(?)
25pdr. 1940 Weir No.266
25pdr. Australian Short No.185 (?)
KVE Member.
Reply With Quote
  #12  
Old 23-03-14, 11:58
Lynn Eades Lynn Eades is offline
Bluebell
 
Join Date: May 2003
Location: Tauranga, New Zealand
Posts: 5,534
Default

The cover of the parts book identifies a MkIII and a MkIII* What is the difference? Were the MkIII's built in the U.K.?..... or for the Brits?
Were there only 3255 MkI's built, but did MkIIIs run into higher numbers?
I know nothing about them, but with carriers and firearms the "*" denotes Canadian built, so what does a a MkIII with no * denote?
__________________
Bluebell

Carrier Armoured O.P. No1 Mk3 W. T84991
Carrier Bren No2.Mk.I. NewZealand Railways. NZR.6.
Dodge WC55. 37mm Gun Motor Carriage M6
Jeep Mb #135668
So many questions....

Last edited by Lynn Eades; 24-03-14 at 13:02.
Reply With Quote
  #13  
Old 23-03-14, 16:43
Michael R. Michael R. is offline
Registered User
 
Join Date: Jun 2011
Location: Canada
Posts: 1,154
Default

Thank-you Rick. As I know SFA about the Lynx, I wonder if there are any indications of serial number ranges in the parts book showing a part used to a certain serial number..... perhaps showing numbers greater than 3255?

By way of example, the FUC-03 parts book for Universal Carriers has an indication where a part is used for a MK-I* U.C. to serial number 240XX, suggesting the MK-I* had a production range that may have reached that serial number range. I have no exposure to the Lynx, so please bear with my musings.
Reply With Quote
  #14  
Old 23-03-14, 22:37
Hanno Spoelstra's Avatar
Hanno Spoelstra Hanno Spoelstra is offline
MLU Administrator
 
Join Date: Feb 2003
Location: The Netherlands
Posts: 14,400
Default

Peter,

Nice find, good luck with the restoration

PS: for those who would wonder where it came from, see the CMPs for sale in Italy thread

Hanno

Click image for larger version

Name:	e.jpg
Views:	24
Size:	60.4 KB
ID:	64468 Click image for larger version

Name:	d.jpg
Views:	20
Size:	72.4 KB
ID:	64469
Reply With Quote
  #15  
Old 24-03-14, 01:53
Peter Duggan Peter Duggan is offline
Registered User
 
Join Date: Apr 2011
Location: Cherry Valley, ON
Posts: 548
Default Hull number

Guys,

Great discussion. Here is a picture of the hull number which was on the LF corner of the horizontal plate, in front of the observers position

.Click image for larger version

Name:	P1010710.jpg
Views:	28
Size:	122.0 KB
ID:	64473
Reply With Quote
  #16  
Old 24-03-14, 12:49
lynx42 lynx42 is offline
Rick Cove
 
Join Date: Jan 2007
Location: Paynesville, AUSTRALIA
Posts: 1,863
Default

Peter, Here are my numbers before the restoration started.
Click image for larger version

Name:	lynx and cnn 009a.jpg
Views:	18
Size:	74.4 KB
ID:	64507

Lynn, No Lynx's were built in the UK only Daimler Dingos of which the Lynx is the Canadian version.

Michael R. I do not have the later books. There are a few anomalies in my books and some numbers between 0 to roughly 400 are mentioned as changes.

The some of the differences between the Lynx I and Lynx II are the axles and wheels, the different open section to the top, no roof, placement of the air cleaner into the crew compartment, shielded ignition system, placement of the sand channels to the rear, and who knows what else.

If you look at my parts book, you will see that it is for a Lynx I. Mk.III and Mk.III* not a Lynx II.

Confused? I am.

Regards Rick.
__________________
1916 Albion A10
1942 White Scoutcar
1940 Chev Staff Car
1940 F30S Cab11
1940 Chev WA LRDG "Te Hai"
1941 F60L Cab12
1943 Ford Lynx
1942 Bren Gun Carrier VR no.2250
Humber FV1601A
Saracen Mk1(?)
25pdr. 1940 Weir No.266
25pdr. Australian Short No.185 (?)
KVE Member.
Reply With Quote
  #17  
Old 24-03-14, 13:05
Lynn Eades Lynn Eades is offline
Bluebell
 
Join Date: May 2003
Location: Tauranga, New Zealand
Posts: 5,534
Default

Rick, I have edited my post deleting ref. to a MkII.
So What is the difference between a MkIII and a MkIII*
__________________
Bluebell

Carrier Armoured O.P. No1 Mk3 W. T84991
Carrier Bren No2.Mk.I. NewZealand Railways. NZR.6.
Dodge WC55. 37mm Gun Motor Carriage M6
Jeep Mb #135668
So many questions....
Reply With Quote
  #18  
Old 24-03-14, 22:56
David Dunlop David Dunlop is offline
Registered User
 
Join Date: Feb 2006
Location: Winnipeg, MB
Posts: 3,384
Default Lynn

The model numbers and marks for the Ford Lynx can be a bit confusing if one tries to cross reference them to other production scenarios. It is best to look at the history of the Lynx Scout Car on its own.

This design came to Canada during the war as the Daimler Dingo, a British design, which it was hoped could be manufactured in Canada. To make it work on Canadian production lines, it morphed into something similar, but very different to the original Dingo. This was the Lynx I and it went through two 'Marks' to reach a vehicle which could go into production. So basically, the first batch of these scout cars to roll off the Ford lines was the Lynx I Mark III and it had some serious problems, the most significant of which were bad axles and a very heavy, difficult to use, folding armoured cover for the crew compartment. At about the 200th vehicle mark in production, Ford actually stopped production, to introduce improved axles and a lighter weight folding armoured hatch. Ford also took advantage of this break to introduce a number of smaller changes to the Lynx like improved rad cooling/protection, better engine cover hinges and latches, etc. etc. These changes were important to the vehicle (but did not solve all the serious problems), but they collectively did not drastically alter the basic look or design of the Lynx MkIII. As a result, Ford simply added the '*' to the existing ID for the vehicle while they continued to sort out the issues at hand. When Ford finally had a solution to everything that needed to be done to improve the Lynx I, it had changed enough in design, it warranted the Lynx II designation, which overall was an excellent vehicle.

Hope this helps.


David
Reply With Quote
  #19  
Old 25-03-14, 07:43
Andrew Rowe Andrew Rowe is offline
Registered User
 
Join Date: Aug 2012
Location: Manawatu , New Zealand
Posts: 544
Wink Lynx Numbers

I have a book Ford Illustrated major assembly catalogue , FMA-01 , this shows Lynx axles from serial #1 to #201 and then #201 to #3000 and then the change to the MK2 Lynx using the new 8 - stud axle from #3000 and above.
The book denotes the same for engines and other assemblies , etc.
__________________
Valentine MkV
Covenanter MkIV
Lynx MKI and MKII
Loyd Carrier / English / Candian / LP.
M3 Stuart
Reply With Quote
  #20  
Old 27-03-14, 02:38
Peter Duggan Peter Duggan is offline
Registered User
 
Join Date: Apr 2011
Location: Cherry Valley, ON
Posts: 548
Default Started

Started by removing the soft skin pieces off the RH side. The deeper I dig the better it looks. I've also attached a picture (thanks Bruce) of the missing armoured fuel tank cover and a fuel tank. Should anyone be aware of the location of any of these pieces, please sing out.

Click image for larger version

Name:	photo (2).jpg
Views:	29
Size:	68.7 KB
ID:	64559 Click image for larger version

Name:	Last Roll - 08.jpg
Views:	27
Size:	92.0 KB
ID:	64560

Last edited by Hanno Spoelstra; 27-03-14 at 08:15. Reason: Formatting
Reply With Quote
  #21  
Old 27-03-14, 11:02
Alex van de Wetering Alex van de Wetering is offline
Moderator
 
Join Date: Mar 2003
Location: Hoofddorp, The Netherlands
Posts: 2,670
Default

Peter,

Congrats on the purchase! Great to see another Lynx coming back from the dead.

Alex
__________________
Chevrolet C8 cab 11 FFW
BSA Folding Bicycle
Reply With Quote
  #22  
Old 02-04-14, 03:11
Peter Duggan Peter Duggan is offline
Registered User
 
Join Date: Apr 2011
Location: Cherry Valley, ON
Posts: 548
Default Colour scheme

Folks,

She's slowly sharing her secrets. I have all the exterior soft skin components removed, tagged and stored. Next step will be to access the engine compartment and remove the engine.
It appears that the original paint colour was desert sand before being painted Khaki green. The lettering 13-C was apparently hand painted on the desert sand before the Khaki green.
Did any Canadian units use Lynx's with the desert sand colours? Apparently the New Zealand forces used Lynx's in Italy?

Thanks, Peter

Click image for larger version

Name:	2014-04-01 19.37.34.jpg
Views:	22
Size:	90.9 KB
ID:	64718

Click image for larger version

Name:	2014-04-01 19.38.21 (2).jpg
Views:	18
Size:	91.6 KB
ID:	64719

Click image for larger version

Name:	2014-04-01 19.38.37 (2).jpg
Views:	16
Size:	72.7 KB
ID:	64720
Reply With Quote
  #23  
Old 02-04-14, 03:48
chris vickery's Avatar
chris vickery chris vickery is offline
3RD ECHELON WKSP
 
Join Date: Feb 2003
Location: Nipissing Ontario Canada
Posts: 2,955
Default

Peter,
if you are in need of any nickel welding rod to put that armour back together just let me know. I have several pounds laying around that I may be inclined to donate to such a deserving project.
__________________
3RD Echelon Wksp

1968 M274A5 Mule Baifield USMC
1966 M274A2 Mule BMY USMC
1958 M274 Mule Willys US Army
1970 M38A1 CDN3 70-08715 1 CSR
1981 MANAC 3/4T CDN trailer
1943 Converto Airborne Trailer
1983 M1009 CUCV

RT-524, PRC-77s,
and trucks and stuff and more stuff and and.......

OMVA, MVPA, G503, Steel Soldiers
Reply With Quote
  #24  
Old 03-04-14, 02:11
Peter Duggan Peter Duggan is offline
Registered User
 
Join Date: Apr 2011
Location: Cherry Valley, ON
Posts: 548
Default Thanks

Chris,

Thanks for the offer. When it comes to the welding, I'll be entrusting that to someone far more professional than myself.

Peter
Reply With Quote
  #25  
Old 03-04-14, 03:11
chris vickery's Avatar
chris vickery chris vickery is offline
3RD ECHELON WKSP
 
Join Date: Feb 2003
Location: Nipissing Ontario Canada
Posts: 2,955
Default

Well Peter, the offer is open. Even a professional will need rod to weld up that armour and it will be expensive as they will probably want to use Ni-rod. Not sure how general purpose mild steel rod will work with armour plate...
The other issue for sure will probably be the fact they will want to preheat the areas prior to welding to ensure sound welds that will be crack free.
__________________
3RD Echelon Wksp

1968 M274A5 Mule Baifield USMC
1966 M274A2 Mule BMY USMC
1958 M274 Mule Willys US Army
1970 M38A1 CDN3 70-08715 1 CSR
1981 MANAC 3/4T CDN trailer
1943 Converto Airborne Trailer
1983 M1009 CUCV

RT-524, PRC-77s,
and trucks and stuff and more stuff and and.......

OMVA, MVPA, G503, Steel Soldiers
Reply With Quote
  #26  
Old 03-04-14, 03:18
Bruce Parker (RIP) Bruce Parker (RIP) is offline
GM Fox I
 
Join Date: Feb 2003
Location: SW Ontario, Canada
Posts: 2,606
Default

Quote:
Originally Posted by chris vickery View Post
Well Peter, the offer is open. Even a professional will need rod to weld up that armour and it will be expensive as they will probably want to use Ni-rod. Not sure how general purpose mild steel rod will work with armour plate...
The other issue for sure will probably be the fact they will want to preheat the areas prior to welding to ensure sound welds that will be crack free.
There might also be a problem that if the existing weld is not very clean the old weld rod (nickle) may not mix well with whatever new rod is being used.
Reply With Quote
  #27  
Old 03-04-14, 03:44
chris vickery's Avatar
chris vickery chris vickery is offline
3RD ECHELON WKSP
 
Join Date: Feb 2003
Location: Nipissing Ontario Canada
Posts: 2,955
Default

If I was doing this up, I would probably look at sandblasting everything bare even before attempting welding her back up. Another key thing about a reweld job like this is to also take into account the gap or amount of material that was torch cut out or that needs to be removed to facilitate decent welding and to allow for this when welding the frame back as well.
What I am getting at is that you need to keep the mounting holes aligned between frame vs body as it would be quite easy to stretch or shrink the overall dimensions on one or the other.
I would be inclined to make the body fit together really nicely and then the frame can be adjusted to match and be unseen.
Should the weld gap end up being too large to effectively weld in a couple passes, the welder can always affix a backer plate on the inside which can be cut off afterwards. A large gap like this can be filled by "weaving" the weld or layering in multiple passes.
Considering the fact that they left the escape hatch uncut, it provides a great reference for how close the two halfs of the hull should be for welding.
__________________
3RD Echelon Wksp

1968 M274A5 Mule Baifield USMC
1966 M274A2 Mule BMY USMC
1958 M274 Mule Willys US Army
1970 M38A1 CDN3 70-08715 1 CSR
1981 MANAC 3/4T CDN trailer
1943 Converto Airborne Trailer
1983 M1009 CUCV

RT-524, PRC-77s,
and trucks and stuff and more stuff and and.......

OMVA, MVPA, G503, Steel Soldiers

Last edited by chris vickery; 03-04-14 at 03:49. Reason: sp
Reply With Quote
  #28  
Old 03-04-14, 03:48
Bruce Parker (RIP) Bruce Parker (RIP) is offline
GM Fox I
 
Join Date: Feb 2003
Location: SW Ontario, Canada
Posts: 2,606
Default colours

There is, of course, the well known fact that the Canadian 5th Armoured Division inherited a great deal of ex 8th Army desert vehicles once it deployed in Italy late 1943. Many crapped out sand coloured vehicles found their way into Canadian hands so a desert coloured Lynx attached to a 5th Div. unit (say Lord Strathcona's Horse, 8th Hussars or British Columbia Dragoons) would be out of order.
Quote:
Originally Posted by Peter Duggan View Post
Folks,

She's slowly sharing her secrets. I have all the exterior soft skin components removed, tagged and stored. Next step will be to access the engine compartment and remove the engine.
It appears that the original paint colour was desert sand before being painted Khaki green. The lettering 13-C was apparently hand painted on the desert sand before the Khaki green.
Did any Canadian units use Lynx's with the desert sand colours? Apparently the New Zealand forces used Lynx's in Italy?

Thanks, PeterAttachment 64718

Attachment 64719


Attachment 64720
Reply With Quote
  #29  
Old 03-04-14, 05:25
chris vickery's Avatar
chris vickery chris vickery is offline
3RD ECHELON WKSP
 
Join Date: Feb 2003
Location: Nipissing Ontario Canada
Posts: 2,955
Default

MMM, desert sand 8th Army. Sexy.
__________________
3RD Echelon Wksp

1968 M274A5 Mule Baifield USMC
1966 M274A2 Mule BMY USMC
1958 M274 Mule Willys US Army
1970 M38A1 CDN3 70-08715 1 CSR
1981 MANAC 3/4T CDN trailer
1943 Converto Airborne Trailer
1983 M1009 CUCV

RT-524, PRC-77s,
and trucks and stuff and more stuff and and.......

OMVA, MVPA, G503, Steel Soldiers
Reply With Quote
  #30  
Old 03-04-14, 23:00
RichCam's Avatar
RichCam RichCam is offline
Registered User
 
Join Date: Jun 2007
Location: Huntsville, Ontario
Posts: 346
Default Lynx Fuel Tank

Peter,

I looked at the picture of the fuel tank. I think I might have one here at the shop. It was in with a bunch of old CMP parts and pieces. Can anyone tell me what the dimensions are? I might even have the fuel tank brackets!
Cheers - Richard
__________________
Richard Hatkoski
1940 CMP C11 C-8 (Restoring)
1940 CMP C11 F-15A (Parts)
1941 CMP C12 C-15A (Parts)
1942 CMP C13 F-60S Dumper (Restoring)
2 x 1941 CMP C12 F-GT (Storage)
194? CMP C13 C-60X (For Sale)
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Lynx Hull number? James Gosling The Armour Forum 3 17-08-15 08:28
At last here are some photos NZ LP hull Lew Skelton The Carrier Forum 12 29-04-11 10:22
Hull # gary_bath_jr The Carrier Forum 5 12-07-10 20:31
Welded hull martyn The Carrier Forum 14 15-03-10 13:02
UC Hull Richard Coutts-Smith The Carrier Forum 14 08-04-08 01:25


All times are GMT +2. The time now is 23:24.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © Maple Leaf Up, 2003-2016