#1
|
|||
|
|||
2 gallon can rack
Hello
Can anyone help me with a close up picture and dimentions of the Hinge and Bar that hold the 2 gallon can in the racks on the front of a Mk2 No 2 carrier please. Also the tab that sticks out for the padlock and the hight of the feet for both racks. Thanks stephen |
#2
|
||||
|
||||
It's probable that mine have had some repairs over the years and might not be exactly as manufactured. But here goes. The water can holder is 1 3/4" off the wing to the bottom of holder. As you can see the front legs need to be shorter as they sit on that bracket. The hinge is just a crudely bent piece of heavy wire 13/64" the strap is made from 1 3/16" x 1/4" x 7 1/2".The padlock lug sticks out 7/8".
The oil can holder sits about 1" from the wing to bottom of holder. Ron |
#3
|
|||
|
|||
Hello Ron,
thank you very much for that, will now go and get on with it. regaurds stephen |
|
|