#1
|
|||
|
|||
Cab 11 Chevrolet 'Caution' Plate
The 'caution' plate was missing from my C15 Cab 11, but I picked up a nice reproduction from Stefan (LWD Parts) a few months back.
What weights should go in there, for a C15 Cab 11? From the MB-C1 manual: Chassis - 4805 lbs Gross - 11200 lbs Now, are those weights listed in the MB-C1 for 11, 12 or 13 cab? Or is there no difference? Thanks, Owen.
__________________
1940 11 Cab C15 1939 DKW KS200 1951 Willys M38 1936 Opel Olympia MVPA # 39159 MVT # 19406 |
#2
|
|||
|
|||
Update
With a bit more digging, the 4th post in this thread:
http://www.mapleleafup.net/forums/sh...light=2A1+body shows the following info: Chassis - 3870 lbs Gross - 8500 lbs If that plate is original to that truck, it would suggest the 11-cab C15 is quite a bit lighter than the equivalent 13-cab. But what I find odd is the gross weight. 8500 lbs is (according to the MB-C1) the gross weight for the C15-A. Did the C15 and C15-A have the same gross weight rating in 'early' production? Owen.
__________________
1940 11 Cab C15 1939 DKW KS200 1951 Willys M38 1936 Opel Olympia MVPA # 39159 MVT # 19406 |
#3
|
||||
|
||||
Blank
From what I have seen on my C8's and in my travels these plates were not stamped but left blank !
__________________
1940 cab 11 C8 1940 Morris-Commercial PU 1941 Morris-Commercial CS8 1940 Chev. 15cwt GS Van ( Aust.) 1942-45 Jeep salad |
#4
|
|||
|
|||
Quote:
Pete |
#5
|
|||
|
|||
Quote:
Regarding the non-stamping of the plates, maybe those trucks were supplied as chassis-cabs from the factory? If so, there would be no guarantee what type of rear body might be fitted. But then, doesn't the gross weight include the body? If so, gross weight could never change. So, the weights for a C15 would remain the same, irrespective of body type. In theory. Maybe the factory got lazy, and missed a few. OR, maybe they were as confused as I am, and didn't bother! My third thought: were these plates an after-thought, to be fitted 'in the field'? Seems odd that these plates are only drilled for two fixings, when four fixings would be a better solution for the size of plate. Owen.
__________________
1940 11 Cab C15 1939 DKW KS200 1951 Willys M38 1936 Opel Olympia MVPA # 39159 MVT # 19406 |
#6
|
||||
|
||||
Owen,
Maybe this table is of help? http://www.mapleleafup.net/vehicles/.../chevspec.html Regards, Hanno
__________________
Regards, Hanno -------------------------- |
#7
|
|||
|
|||
Quote:
Thanks for that, but I believe those will be Cab-13 weights. The problem being there isn't a specific maintenance manual covering the earlier types (pre-1942), with detailed specifications. My August 1940 instruction book has brief specifications, but no weight data. I will keep looking; the answer will be out there. Somewhere. Owen.
__________________
1940 11 Cab C15 1939 DKW KS200 1951 Willys M38 1936 Opel Olympia MVPA # 39159 MVT # 19406 |
#8
|
|||
|
|||
Believe Capacities in Imperial Measure
Quote:
Interesting and useful table, looking at the capacity part of the table that they are all in Imperial measures so that needs to be taken into account when converting to metric or English measures. Cheers Phil
__________________
Phil Waterman `41 C60L Pattern 12 `42 C60S Radio Pattern 13 `45 HUP http://canadianmilitarypattern.com/ New e-mail Philip@canadianmilitarypattern.com |
#9
|
|||
|
|||
Hi Phil,
Imperial = 'English', so no conversion required. Now that might be a bit lost on a country that opted out of the British Commonwealth in 1776, and modified the Imperial measures just a bit to make things confusing (1 ton = 2,000 pounds, for example, whereas a real, Imperial ton is still 2,240 pounds) .... all tongue in cheek, of course, but there are some odd differences that still puzzle me as to 'why?' Mike (an ex-pat Aussie who, after over 8 years, is well integrated into life in the USA) |
#10
|
|||
|
|||
Problem of English vs US vs Imperial measurement
Hi Mike
Yes should have said US liquid measure. Cheers Phil
__________________
Phil Waterman `41 C60L Pattern 12 `42 C60S Radio Pattern 13 `45 HUP http://canadianmilitarypattern.com/ New e-mail Philip@canadianmilitarypattern.com |
#11
|
|||
|
|||
More weight data
Searching the forums on an unrelated topic, I came across this:
http://www.mapleleafup.net/forums/sh...ad.php?t=12876 Post #13 shows the weight data as: Chassis - 3870 lbs Gross - 7500 lbs Cheers, Owen.
__________________
1940 11 Cab C15 1939 DKW KS200 1951 Willys M38 1936 Opel Olympia MVPA # 39159 MVT # 19406 |
#12
|
|||
|
|||
The vehicle data book reproduced by Bill Gregg does give curb and maximum weights (that differ by body type) for many variants. The date of publication means most will be cab 13.
I would be reluctant to use the curb weight as the cowl and chassis as my understanding is that cowl only includes the floor and front portion of the cab, not roof and cab back. It would also leave out the rear body. I could be wrong on this. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Chevrolet C8a HUW - Bridge plate? | Jerry Hill | The Softskin Forum | 8 | 04-09-23 17:36 |
Halloween caution | Chris Suslowicz | The Sergeants' Mess | 0 | 31-10-17 22:31 |
For Sale: Data plate Chevrolet C15A | Luca Giovannetti | For Sale Or Wanted | 0 | 15-08-16 17:55 |
Chevrolet Data Plate Query | Bob Moseley (RIP) | The Softskin Forum | 2 | 18-01-09 18:56 |
caution plate | Ken Hughes | The Softskin Forum | 2 | 20-11-06 07:28 |