MLU FORUM  

Go Back   MLU FORUM > MILITARY VEHICLES > Post-war Military Vehicles

Notices

Reply
 
Thread Tools Display Modes
  #91  
Old 05-08-17, 16:47
Wayne Hingley's Avatar
Wayne Hingley Wayne Hingley is offline
Registered User
 
Join Date: Aug 2015
Location: Water Valley, Alberta
Posts: 733
Default

Thanks Brad. Its not perfect, as it still shows some of the signs of its 20 year career in the CF. it also has a birthday coming up in December (50 years old). Its still a youngster compared to most of the beautiful vehicles on this site.
__________________
1953 M37 CDN
1953 M38A1 CDN
1967 M38A1 CDN2
Reply With Quote
  #92  
Old 08-08-17, 23:23
Wayne Hingley's Avatar
Wayne Hingley Wayne Hingley is offline
Registered User
 
Join Date: Aug 2015
Location: Water Valley, Alberta
Posts: 733
Default

Progress seems like it has slowed down again... I did manage to complete the hookup and testing of the electrical system, and I got all of the interior components back together. The clutch is adjusted, and I'll try to get the brakes finished tonight. I haven't tried to start it yet, but I did test the starter and it turns over nicely.
Attached Thumbnails
IMG_2754.jpg  
__________________
1953 M37 CDN
1953 M38A1 CDN
1967 M38A1 CDN2
Reply With Quote
  #93  
Old 08-08-17, 23:52
rob love rob love is offline
carrier mech
 
Join Date: Feb 2003
Location: Shilo MB, the armpit of Canada
Posts: 7,517
Default

I guess it depends on what year you are trying to portray, but the extinguisher and the SMG locations were swapped around...I believe for security reasons. The (blue) extinguisher ended up on the dash.

Looks great though Wayne. Personally, I would have been tempted to drive it around for a couple years in it's semi gloss green, then cam it once that paint stopped looking "new".
Reply With Quote
  #94  
Old 09-08-17, 01:17
Wayne Hingley's Avatar
Wayne Hingley Wayne Hingley is offline
Registered User
 
Join Date: Aug 2015
Location: Water Valley, Alberta
Posts: 733
Default

Hi Rob: I know there was a position swap of the SMG and fire extinguisher at some point, however this particular jeep seems to have avoided that change. There were no holes in the dashboard for the extinguisher mount, and likewise there was no hole pattern for the SMG mount down on the top of the toolbox between the seats. I decided to leave those two accessories as they were (I didnt want to drill any new holes). I wonder if many other jeeps avoided the swap of those items. I don't yet have a blue Ansul extinguisher, but Ill be keeping my eye open for one in good condition that is looking for a new home.

Good point on the paint scheme/succession... I guess I got a bit excited and couldn't stop painting until it was all gone... haha (Im glad the painting is over).
__________________
1953 M37 CDN
1953 M38A1 CDN
1967 M38A1 CDN2
Reply With Quote
  #95  
Old 09-08-17, 01:58
rob love rob love is offline
carrier mech
 
Join Date: Feb 2003
Location: Shilo MB, the armpit of Canada
Posts: 7,517
Default

I think I have an old blue one out in the yard somewhere. There are also some out in my favorite scrapyard, but they will need rebuild. You could move all the stuff from the red one over to the blue one.
Reply With Quote
  #96  
Old 09-08-17, 02:09
Wayne Hingley's Avatar
Wayne Hingley Wayne Hingley is offline
Registered User
 
Join Date: Aug 2015
Location: Water Valley, Alberta
Posts: 733
Default

Great, thanks Rob. If you come across one while digging around, grab it for me. My friend is in the fire protection business, and he thinks one of his suppliers can service the Ansul extinguishers (to be confirmed though).
__________________
1953 M37 CDN
1953 M38A1 CDN
1967 M38A1 CDN2
Reply With Quote
  #97  
Old 09-08-17, 06:06
Wayne Hingley's Avatar
Wayne Hingley Wayne Hingley is offline
Registered User
 
Join Date: Aug 2015
Location: Water Valley, Alberta
Posts: 733
Default

Brakes are done. Some final checks tomorrow night, and I'll try to fire it up. Fingers crossed!
Attached Thumbnails
IMG_2755.jpg  
__________________
1953 M37 CDN
1953 M38A1 CDN
1967 M38A1 CDN2
Reply With Quote
  #98  
Old 10-08-17, 07:25
super dave super dave is offline
Dave Good
 
Join Date: Dec 2003
Location: Onoway, Alberta, Canada
Posts: 683
Default

WOW looks great, Hope to see it in Red Deer.
Reply With Quote
  #99  
Old 10-08-17, 15:02
Ed Storey Ed Storey is offline
Registered User
 
Join Date: Feb 2003
Location: Ottawa
Posts: 1,426
Default M38A1CDN2 Restoration

Slick looking restoration, nice work.
Reply With Quote
  #100  
Old 11-08-17, 05:21
Wayne Hingley's Avatar
Wayne Hingley Wayne Hingley is offline
Registered User
 
Join Date: Aug 2015
Location: Water Valley, Alberta
Posts: 733
Default

Thanks Ed and Dave. I took it for a short test drive today. Still a several little things to do and adjustments to be made. Some will wait until this winter.
__________________
1953 M37 CDN
1953 M38A1 CDN
1967 M38A1 CDN2
Reply With Quote
  #101  
Old 11-08-17, 05:33
David Dunlop David Dunlop is offline
Registered User
 
Join Date: Feb 2006
Location: Winnipeg, MB
Posts: 3,384
Default

Hi Wayne. You are doing a beautiful job!

Been a very long time since I have seen an M38A1 CDN2 in person. Just wondering about your fuel primer pump set up which I think is the large brass item to the right of the master light switch assembly.

I have only ever seen these mounted with the main brass body mounted behind the dash assembly, leaving just the black handle and throat lock nut visible on the face of the dash itself. Was this installation different for the CDN2?

David
Reply With Quote
  #102  
Old 11-08-17, 06:26
Wayne Hingley's Avatar
Wayne Hingley Wayne Hingley is offline
Registered User
 
Join Date: Aug 2015
Location: Water Valley, Alberta
Posts: 733
Default

Hi David. The way you describe is the way it is mounted on my 1953 jeep. My understanding (and someone can correct me) is the CDN2's originally had these primers mounted down low to the left of the ignition switch. However that location is just in front of the driver's knee and not practical. The modification was to drill a hole and mount them up in the location you see. They did not mount them flush with the dashboard in that new location (as far as I know). Again, someone please confirm (Rob Love...?)

A poor photo below (from 1968 Operators Manual) that shows the primer in the location by the main switch, and mounted with the brass body on the driver side of the dashboard. The windshield washer fluid pump eventually took the empty position to the left of the ignition switch... Im not sure what year that modification came around. In the photo from the manual it looks like there is a plug in that hole. Perhaps the primer was located up by the main switch from the factory.

Update: I just noticed the windshield washer fluid pump shows up in the 1970 update of the Operator's Manual.
Attached Thumbnails
FullSizeRender.jpg  
__________________
1953 M37 CDN
1953 M38A1 CDN
1967 M38A1 CDN2

Last edited by Wayne Hingley; 11-08-17 at 06:50. Reason: add photo and update
Reply With Quote
  #103  
Old 12-08-17, 02:57
jdmcm's Avatar
jdmcm jdmcm is offline
Registered User
 
Join Date: Dec 2010
Location: Surrey, BC, CDN
Posts: 672
Default

Fantastic work Wayne! Can't wait to see it in person!

John
Reply With Quote
  #104  
Old 12-08-17, 18:50
Wayne Hingley's Avatar
Wayne Hingley Wayne Hingley is offline
Registered User
 
Join Date: Aug 2015
Location: Water Valley, Alberta
Posts: 733
Default Made some timing adjustments and...

...took another test drive this morning. Working much better, but not perfect yet. Still a small hesitation, and sometimes hard to start. Ill keep adjusting...

Im not getting enough (or any) vacuum to run the wipers. I may need to rebuild the pump. Unless there are any suggestions on how to improve vacuum.

A few photos from today's drive around the neighbourhood. My two boys (8 & 10 years old) absolutely love riding in the jeep!
Attached Thumbnails
Aug jeep 1.jpg   Aug jeep 2.jpg   Aug jeep 3.jpg   Aug jeep 4.jpg  
__________________
1953 M37 CDN
1953 M38A1 CDN
1967 M38A1 CDN2
Reply With Quote
  #105  
Old 12-08-17, 19:29
rob love rob love is offline
carrier mech
 
Join Date: Feb 2003
Location: Shilo MB, the armpit of Canada
Posts: 7,517
Default

Quote:
Originally Posted by Wayne Hingley View Post
Hi David. The way you describe is the way it is mounted on my 1953 jeep. My understanding (and someone can correct me) is the CDN2's originally had these primers mounted down low to the left of the ignition switch. However that location is just in front of the driver's knee and not practical. The modification was to drill a hole and mount them up in the location you see. They did not mount them flush with the dashboard in that new location (as far as I know). Again, someone please confirm (Rob Love...?)

.
http://www.mapleleafup.net/forums/at...3&d=1281490718

Photo above from this site shows the primer pump set up the same as yours Wayne. I suspect with the close proximity to the light switch, the two may have interfered with each other if mounted the usual way.
Reply With Quote
  #106  
Old 12-08-17, 19:52
Wayne Hingley's Avatar
Wayne Hingley Wayne Hingley is offline
Registered User
 
Join Date: Aug 2015
Location: Water Valley, Alberta
Posts: 733
Default

Great photo Rob. I had not seen it before. Also a good visual on the alternate location for the SMG and fire extinguisher.

Particularly unusual (to me) is the reverse orientation of the park brake lever (using the seat mount bolt). I have never seen that before. Was that common, and what was the reason? Was it to avoid interference with the SMG?
__________________
1953 M37 CDN
1953 M38A1 CDN
1967 M38A1 CDN2
Reply With Quote
  #107  
Old 12-08-17, 20:25
rob love rob love is offline
carrier mech
 
Join Date: Feb 2003
Location: Shilo MB, the armpit of Canada
Posts: 7,517
Default

That is the only reversed one that I have seen. Certainly not an approved modification.

As to interference with the SMG, many Jeeps would have never seen an SMG in them. It was more of an armored weapon, although they were well interspersed into all units.
Reply With Quote
  #108  
Old 20-08-17, 01:54
Wayne Hingley's Avatar
Wayne Hingley Wayne Hingley is offline
Registered User
 
Join Date: Aug 2015
Location: Water Valley, Alberta
Posts: 733
Default Vacuum issue...

Quote:
Originally Posted by Wayne Hingley View Post
...Im not getting enough (or any) vacuum to run the wipers. I may need to rebuild the pump. Unless there are any suggestions on how to improve vacuum.
One of the copper vacuum lines on the windshield was completely plugged with crap. Once it was cleaned out, the wipers work great. Of course I had already switched in a spare fuel/vacuum pump, as I assumed that was the issue (I need to remember to always check the easy stuff first!).
__________________
1953 M37 CDN
1953 M38A1 CDN
1967 M38A1 CDN2
Reply With Quote
  #109  
Old 20-08-17, 04:00
rob love rob love is offline
carrier mech
 
Join Date: Feb 2003
Location: Shilo MB, the armpit of Canada
Posts: 7,517
Default

It sounds like the mudwasps. They used to often build their nests in the vent line of the Jeep wipers, rendering them useless.

The little buggers have even been attributed to airliner crashes when they have either blocked pitot tubes or relief valve vents.
Reply With Quote
  #110  
Old 20-08-17, 06:25
Wayne Hingley's Avatar
Wayne Hingley Wayne Hingley is offline
Registered User
 
Join Date: Aug 2015
Location: Water Valley, Alberta
Posts: 733
Default

Quote:
Originally Posted by rob love View Post
It sounds like the mudwasps. They used to often build their nests in the vent line of the Jeep wipers, rendering them useless.

The little buggers have even been attributed to airliner crashes when they have either blocked pitot tubes or relief valve vents.
That's a new one to me... it was packed full of fine dark brown powder (mud?). It was so dense that I had to use a 12" long 3/16" drill bit to auger it out. Then I could get a stiff wire in there to clean it out. I've never heard of mud wasps, but it sounds like what I had.
Attached Thumbnails
IMG_2795.JPG  
__________________
1953 M37 CDN
1953 M38A1 CDN
1967 M38A1 CDN2
Reply With Quote
  #111  
Old 20-08-17, 16:14
chris vickery's Avatar
chris vickery chris vickery is offline
3RD ECHELON WKSP
 
Join Date: Feb 2003
Location: Nipissing Ontario Canada
Posts: 2,955
Default

Unbelievable! A guy who actually drives his restoration and will go in the bush with it. No trailer queen there. Keep up the great work Wayne.
BTW, decals received, look great.
__________________
3RD Echelon Wksp

1968 M274A5 Mule Baifield USMC
1966 M274A2 Mule BMY USMC
1958 M274 Mule Willys US Army
1970 M38A1 CDN3 70-08715 1 CSR
1981 MANAC 3/4T CDN trailer
1943 Converto Airborne Trailer
1983 M1009 CUCV

RT-524, PRC-77s,
and trucks and stuff and more stuff and and.......

OMVA, MVPA, G503, Steel Soldiers
Reply With Quote
  #112  
Old 20-08-17, 21:15
Phil Waterman Phil Waterman is offline
Moderator
 
Join Date: Feb 2003
Location: Temple, New Hampshire, USA
Posts: 3,927
Default Mud Wasps

Hi

Really good point about checking lines for foreign stuff, ie wasps nest. I found them in other crud in brand new brake and fuel line lengths from the auto part.

Really messes up a brake job.

Taken to blown Q-tips through any new or old lines, works great as long as the lines are straight. Anything bent or too small for the Q-tip I use mechanics wire.

Yes, I do like people who actually drive their MVs, one of the guys in our local club just finished restoring a M38 which had been his trail ride Jeep for years, we have been kidding him that we would be glad to put the first scratch in it so he could go back to enjoying it in the woods. If he doesn't find a trail jeep by next spring, would be willing to bet he will be back in the woods.

But you can drive MVs in the woods/trail with little more than branch scratches. I all ways like to follow some thing a little bigger than my truck which helps avoid scratches.

Cheers Phil
__________________
Phil Waterman
`41 C60L Pattern 12
`42 C60S Radio Pattern 13
`45 HUP
http://canadianmilitarypattern.com/
New e-mail Philip@canadianmilitarypattern.com
Reply With Quote
  #113  
Old 20-09-17, 06:02
Wayne Hingley's Avatar
Wayne Hingley Wayne Hingley is offline
Registered User
 
Join Date: Aug 2015
Location: Water Valley, Alberta
Posts: 733
Default Scratches

I have been putting a few miles on the jeep after getting it inspected and registered. Interesting to note it has never been registered in any province since leaving service in 1987.

I live about 7km from the nearest pavement, which makes it hard to keep the dust off everything... so it shows that it's getting some use (and as Phil notes; a few scratches too).
Attached Thumbnails
IMG_2984.jpg  
__________________
1953 M37 CDN
1953 M38A1 CDN
1967 M38A1 CDN2
Reply With Quote
  #114  
Old 12-11-17, 04:52
Wayne Hingley's Avatar
Wayne Hingley Wayne Hingley is offline
Registered User
 
Join Date: Aug 2015
Location: Water Valley, Alberta
Posts: 733
Default

I was planning to take the Jeep in to the Calgary Military Museum for Remembrance Day services, but due to the recent snow, the highways were very messy with salt and grime. Unfortunately I had to cancel.

So instead, I took the Jeep out for a drive around the local neighbourhood. It was a nice day for a drive.
Attached Thumbnails
0194BEA3-483F-48E5-86B3-29931CE0828C.jpeg  
__________________
1953 M37 CDN
1953 M38A1 CDN
1967 M38A1 CDN2
Reply With Quote
  #115  
Old 19-11-17, 15:43
Peter Phillips Peter Phillips is offline
Registered User
 
Join Date: Dec 2015
Location: Cold Lake, Alberta, Canada
Posts: 203
Default

That looks awesome Wayne! Is this considered closure to start the M37 now?
__________________
Peter Phillips
1952 M38Cdn
1953 M100Cdn
1951 PE-95K Gen Set
MVPA
Cdn Forces 1986-2006
Reply With Quote
  #116  
Old 19-11-17, 16:04
Wayne Hingley's Avatar
Wayne Hingley Wayne Hingley is offline
Registered User
 
Join Date: Aug 2015
Location: Water Valley, Alberta
Posts: 733
Default

Thanks Pete. This one is close to complete. I still have a couple of small things to finish off.

The M37 is covered in snow, and I doubt it will get any attention before spring. I have been rounding up a few of the parts I'm going to need. Lately I have been playing around with a 318 radio shelter (slide-in) that I plan to put in the back of the M37.
__________________
1953 M37 CDN
1953 M38A1 CDN
1967 M38A1 CDN2
Reply With Quote
  #117  
Old 19-11-17, 17:17
Ed Storey Ed Storey is offline
Registered User
 
Join Date: Feb 2003
Location: Ottawa
Posts: 1,426
Default M38a1cdn2

A fantastic photograph of an exquisitely restored M28A1CDN2.
Reply With Quote
  #118  
Old 20-11-17, 19:03
jdmcm's Avatar
jdmcm jdmcm is offline
Registered User
 
Join Date: Dec 2010
Location: Surrey, BC, CDN
Posts: 672
Default

Great job Wayne, beautiful restoration and super attention to detail, fantastic!

John
Reply With Quote
  #119  
Old 08-03-18, 04:41
Wayne Hingley's Avatar
Wayne Hingley Wayne Hingley is offline
Registered User
 
Join Date: Aug 2015
Location: Water Valley, Alberta
Posts: 733
Default Big smile on my face...

We have been having some very nice sunny winter days lately. It was time to give the Jeep a bit of exercise. Nice little run around the neighbourhood.
Attached Thumbnails
0DB8F9D7-2244-4C46-92EE-BA85A5E8961C.jpg  
__________________
1953 M37 CDN
1953 M38A1 CDN
1967 M38A1 CDN2
Reply With Quote
  #120  
Old 08-03-18, 13:36
Phil Waterman Phil Waterman is offline
Moderator
 
Join Date: Feb 2003
Location: Temple, New Hampshire, USA
Posts: 3,927
Default Like the photo

Hi Wayne

Like the B&W photo gives that period feeling to the picture. Sort of hard to tell if the photo is today or just after the Jeep went into service.

I'll be out with one of my trucks later today packing down the 10 to 12 inches of snow from the over night. Frost is out of the driveway so plowing is not the first option.

Cheers Phil
__________________
Phil Waterman
`41 C60L Pattern 12
`42 C60S Radio Pattern 13
`45 HUP
http://canadianmilitarypattern.com/
New e-mail Philip@canadianmilitarypattern.com
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Dual RT-524's in M38A1 CDN2 rick25 Post-war Military Vehicles 4 06-09-14 08:14
Jeep M38A1 / cdn2 CWO (ret) Gilles Aubé Post-war Military Vehicles 20 09-06-14 04:08
New winter project: Borgward malcolm erik bogaert Post-war Military Vehicles 13 22-11-12 12:34
New M38A1 CDN2 rick25 Post-war Military Vehicles 27 11-05-12 00:24
MG mount for a M38A1 CDN2 BOBM35A2 Post-war Military Vehicles 31 19-06-10 01:44


All times are GMT +2. The time now is 15:53.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © Maple Leaf Up, 2003-2016