#1
|
|||
|
|||
some relatively easy CMP 15-cwt ?s for you...
generally, what is the diameter of a CMP wheel? were there more common wheels, and less common ones? i know in the 15-cwt section on MLU, it mentions something about specific tires...
just wondering if there was an average, or something. what was the colour of the interior? floor, panels, roof...etc. any help in that would be great. that cylinder in the front right before the door, what is that? ash tray? sorry if these questions are easily answered, but i couldn't find anything yet. thanks in advance |
#2
|
||||
|
||||
Re: some relatively easy CMP 15-cwt ?s for you...
Quote:
Quote:
Quote:
Hope this helps, Hanno |
#3
|
|||
|
|||
hey everyone,
Hanno, really sorry i didn't reply sooner, i've been swamped with school. but thanks for the answers, very helpful. except i STILL don't get the size of the tires i don't get car stuff enough to understand those numbers. as for the others, i get it! so thank you. |
#4
|
|||
|
|||
Tire size...
Bonjour Von Cougar
Tire size was fairly simple...... on the CMP I believe that only two sizes of wheels existed..... the 16 inch rims.... usually with 900X16 tires... some of the smaller 15 cwt truck carrying a heavy load... such as radio trucks had 10:50 X 16 tires. The larger 30 and 60 cwt trcuks had 20 inch wheels...again usually 900 X 20 tires... special applications had 10:50 X 20 tires. In both cases the wheel rim is made of two pieces bolted together approx. 3/16 inch thick... I beleive that most wheels were made by Keyes....which still exists today.... they were stamped using a 1500 ton press..... some nut cracker....
__________________
Bob Carriere....B.T.B C15a Cab 11 Hammond, Ontario Canada |
#5
|
|||
|
|||
hi again, all. thanks for the replies, i've got the tire thing straightened out.
now, next question: all the scale models of CMP trucks i've found have wood-sided beds (clearly wood with the grain showing). however, when i look at pictures of CMPs online, they don't seem to be made of wood like that. are they just painted well to cover the grain, or are they made of something else? i know for some countries like Germany and Russia during the war they had to switch materials on their vehicles. is this the case, or am i just dreaming? thank you! |
#6
|
||||
|
||||
wood or steel
The answer is although most bodies were steel there were also steel and wood composite bodies as well as canvas covered wood as in the Australian ambulances. The Aussie wireless on the C15 and C15A chassis was steel but caneite and plywood lined on the inside.
Generally, the early (1941 and earlier) long wheelbase trucks were more likely to have timber on the tray and even the spare wheel carrier construction.
__________________
Film maker 42 FGT No8 (Aust) remains 42 FGT No9 (Aust) 42 F15 Keith Webb Macleod, Victoria Australia Also Canadian Military Pattern Vehicles group on Facebook https://www.facebook.com/groups/canadianmilitarypattern |
#7
|
||||
|
||||
2H1 composite steel and wood cargo body
Quote:
Hope this helps, Hanno |
#8
|
|||
|
|||
hey again, and thanks for those quick replies.
that sorts it all out for me. i think i knew that, but i did so much research a few months ago on different vehicles that a lot of the information blended in. but yup, that all makes sense. and thanks for the link to Colin's site, Hanno, that's what i was looking for. yes, i'm talking about that Peerless model, as well as the Modelik paper model. its because i'm working on a 1/6 version of the truck (as in the 12" GIJoe figures, etc.) i'm just about to start construction after quite a bit of research and modeling (the Peerless and the paper). the differences that are required to transfer the truck to 1/6 aren't that noticeable from the outside (it's mainly the frame and everything at the bottom). there are many out there that understandably would complain about the differences, yet it's somewhat required for 1/6. anyway, that's why i've been asking all these questions. so thank you for your answers, and for answering future questions, and i'll post my final product once i'm complete, or near complete. |
#9
|
|||
|
|||
CMP Wheel Size
Hi Von Cougar Better late than sorry. Bob Carriere's answer was somewhat inaccurate, partly even incorrect - and most certainly confusing! Here are the main rules for you: All 8 cwt's have 9.25x16 wheels All 15 cwt's have 900x16 wheels All 30 cwt's have 1050x16 wheels All 60 cwt's have 1050x20 wheels All FATs have 1050x20 wheels Then there are allways the rare exceptions, of course. John |
#10
|
||||
|
||||
Quote:
Indeed C8A's had 9.25-16 tyres, but C8's and F8's had 9.00-13 tyres... Hanno |
#11
|
|||
|
|||
Tyre sizes
Go here. http://www.users.bigpond.com/ROD_DIERY/WHEELS.html
I have done lots of research into this subject. Regards, Rod |
#12
|
||||
|
||||
F8A?
And the rare, very rare F8A..sames as C8A? The prototype has Dunlop TRAK GRIP 9.25 x 16 tyres...see
http://clubs.hemmings.com/clubsites/chevytalk/F8A1.jpg Still have no certain info that these were for India, built 1942. |
#13
|
|||
|
|||
Hi Von,
Having restored British WW2 composite bodied vehicles I can assure you about the only time you may see the wood grain on a military vehicle is if the wood had been exposed to the desert wind and sandblasted. The woodgrain effect on models, Like the grain applied to vynal siding, is bogus. Military vehicles were painted very well, and if moved to another theatre or the climate changed, repainted again and again. so any subtleties such as woodgrain dissapeared. The wood chosen for coachbuilding back then, such as Norfolk pine, was old slow growth and generally very close-grained unlike the pine found today at your local supply, which is generally "farmed" and harvested within 20 to 30 years. All the wood I have seen used for coachbuilding on WW2 vehicles was dressed (machine planed/thicknessed) on four sides, so once painted it appears smooth. Hope this is of some help. Cheers, Dave |
#14
|
|||
|
|||
very helpful indeed, dave, thank you!
that's actually a very hearty relief, as if i wanted to do a wood-laden CMP, i was worried about having to do the wood grain myself in scale, but the fact that it's smooth is excellent. thank you for all of your help, everyone. my work on this project is coming along quite nicely. |
#15
|
|||
|
|||
CMP Wheel Size
Cheerio Hanno Of course you're right, but I chose to regard the 9.00x13 as an exception. The F8 and C8 were in fact rather limited in numbers as well as operational role, and also I didn't want to be too specific, but tried to make a rather complicated thing a bit more simple - sorry, won't do it again! Anyway - you're right, and I hate it A true exception is this odd C-60L which sports 10.50x16 wheels. A rather rare version, to my knowledge. (Or is it really?) Note the cable rollers on the front bumper - this vehicle had a frame winch identical to the ones on the CGT (FAT). And don't get fooled by the unusually low body sides, they're cut down for easy access, i guess. (And yes Hanno - that's me standing in front of the truck!) I leave it to our members to try and reveal the true identity of this vehicle. Chassis serial no. is 2844306027, but that's all I got. Good luck John |
#16
|
||||
|
||||
Quote:
Regards, Hanno P.S. you're a lucky guy to have such a truck to scratch you back on |
#17
|
||||
|
||||
16" wheels on C60L
The 16" wheels won't fit on the large brake drums that are fitted on the 6" steering ends, so this truck must have the smaller drums with 4 7/8" steering. This means this truck either has had the front axle swapped over at some time, or it is like my F60L and described in the parts book as "as supplied to Indian Army". I don't think they were all part of the Indian Army's fleet, just that there is a specification for a lighter front end in some trucks. Even with the light front axle, though, they were still fitted with 10.50-20 wheels.
|
#18
|
||||
|
||||
Quote:
|
|
|