|
|
#2
19-02-07, 16:17
|
|||
|
|||
Must be getting lonesome....
....with nobody replying to your enquiry.....
Cab 11 and cab 12 engine covers are hard to find and even harder is the right hand panel..... that usually gets taken off for maintenance and never gets replaced...... Your best bet is to contact Phil Waterman who has made a replica of that same panel..... in fact he has reproduced the whole thing. He should be able to send you some drawings of the size and bends required to fabricate your own. The you can decide if you want the sparkplug access panel or not.... Good luck and if you do make one post some pictures.. Bob C
__________________
Bob Carriere....B.T.B C15a Cab 11 Hammond, Ontario Canada 
|
|
#3
20-02-07, 00:02
|
|||
|
|||
|
Your the second person who needs that drawing
I've been looking for the drawings or in this case full size templates of all the bits and peaces and how to fabricate the side panel. I’ve found all the templates but I trim the parts to fit to much to be of much uses. But I still have both of Bobs panels on the bench next to the one I made so I will sit down with the CAD and see if I can’t come up with a set of drawings for making useable panels. As you can see on my web page http://canadianmilitarypattern.com/SheetMetalWork.html the panel that I made is a good fit but is not an exact copy as I did not have the tools to make up some of the compound curves which were made by stamping the parts.
__________________
Phil Waterman `41 C60L Pattern 12 `42 C60S Radio Pattern 13 `45 HUP http://canadianmilitarypattern.com/ New e-mail Philip@canadianmilitarypattern.com
|
|
#4
20-02-07, 00:35
|
||||
|
||||
|
Is this for a Chev or a Ford? I think I've got a spare panel for a Chev.
__________________
1940 Cab 11 C8 Wireless with 1A2 box & 11 set 1940 Cab 11 C8 cab and chassis 1940 Cab 11 C15 with 2A1 & Motley mount & Lewis gun 1940 Cab 11 F15A w/ Chev rear ends 1941 Cab 12 F15A 1942-44 Cab 13 F15A x 5 1942 cab 13 F15A with 2B1 box 1943 cab 13 F15A with 2H1 box 1943 Cab 13 C8A HUP 1944 Cab 13 C15A with 2C1 box 1943 Cletrac M2 High Speed Tractor MkII Bren gun carrier chassis x 2 Last edited by cletrac (RIP); 20-02-07 at 02:18.
|
|
#5
20-02-07, 01:42
|
|||
|
|||
|
I was assuming Chevy
I think Bob and I are talking Chevy, good point of clarfication.
__________________
Phil Waterman `41 C60L Pattern 12 `42 C60S Radio Pattern 13 `45 HUP http://canadianmilitarypattern.com/ New e-mail Philip@canadianmilitarypattern.com
|
|
#7
10-03-07, 23:42
|
|||
|
|||
|
Persistence ...persistence....
Patience pays off..... you should be able to bring this one back to original......
Don't forget to post a picture of the panel when all cleaned up.. Bob
__________________
Bob Carriere....B.T.B C15a Cab 11 Hammond, Ontario Canada
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
