#1
|
||||
|
||||
Suspension Jacking Wedges
Hi, Has anyone got dimensions for the jacking wedges for the carrier, I have attached a couple of pictures but they are missing a few dimensions.
What is the thickness of the metal?. Can anyone add any missing dimensions?. Thanks Kevin.
__________________
2pdr Tank Hunter Universal Carrier 1942 registered 11/11/2008. 3" Mortar Universal Carrier 1943 registered 06/06/2009. 1941 Standard Mk1 stowage Carrier, Caunter camo. 1941 Standard Mk1 stowage Carrier, light stone. 10 cwt wartime mortar trailer. 1943 Mk2 Daimler Dingo. 1943 Willys MB. 1936 Vickers MG carrier No1 Mk1 CMM 985. |
#2
|
|||
|
|||
Kevin
Made from 1/4". The first one is 24mm at the top, and 18mm at the ends.
I will measure up the other two later.
__________________
Bluebell Carrier Armoured O.P. No1 Mk3 W. T84991 Carrier Bren No2.Mk.I. NewZealand Railways. NZR.6. Dodge WC55. 37mm Gun Motor Carriage M6 Jeep Mb #135668 So many questions.... |
#3
|
|||
|
|||
Kevin
Kevin. The intermediate one is a parallel 18mm, the third is 19mm angled off down to 1mm. the two angled ones are both square on one side. Is that all you want?
__________________
Bluebell Carrier Armoured O.P. No1 Mk3 W. T84991 Carrier Bren No2.Mk.I. NewZealand Railways. NZR.6. Dodge WC55. 37mm Gun Motor Carriage M6 Jeep Mb #135668 So many questions.... |
|
|