MLU FORUM  

Go Back   MLU FORUM > MILITARY VEHICLES > The Armour Forum

Notices

Reply
 
Thread Tools Display Modes
  #1  
Old 27-02-19, 03:52
jdmcm's Avatar
jdmcm jdmcm is offline
Registered User
 
Join Date: Dec 2010
Location: Surrey, BC, CDN
Posts: 672
Default Canadian Centurion tanks intercom system?

Perhaps the Canadian Centurion vets can help me out, what would have been the radio in place in Canadian centurions and what system was used by the crew to communicate? And we're these exclusively Canadian equipment or versions of US or NATO gear? I know it is easy to find the US Vic 1 and Vic 3 intercoms, would these have been the same or similar?

Thanks as always for the help

John
Reply With Quote
  #2  
Old 02-03-19, 02:52
David Wilkinson David Wilkinson is offline
Registered User
 
Join Date: Oct 2018
Location: Appleton ON, Canada
Posts: 10
Default

I was a crew commander in the Centurion Mk11 in germany from 69 to 72. The Centurion always had the Brit IC which was used with the C42 family of radios. They integrated the American family of radios (46/25 sets) with the Brit harness at the JD9, I believe. It worked great and in my opinion was superior to the US IC which I had as a Leo C1 CC 10 years later.
Reply With Quote
  #3  
Old 03-03-19, 19:32
jdmcm's Avatar
jdmcm jdmcm is offline
Registered User
 
Join Date: Dec 2010
Location: Surrey, BC, CDN
Posts: 672
Default

David

so did the Leo have US style radios and IC's installed from the start? I want to install a IC' in our Centurion, currently it has no radio, it does have some British IC boxes but how I would go about integrating components looks a little beyond me so I was trying to pick a system that would be simple and readily available. Obviously the drivers station has to go through the RBJ

John
Reply With Quote
  #4  
Old 03-03-19, 19:40
jdmcm's Avatar
jdmcm jdmcm is offline
Registered User
 
Join Date: Dec 2010
Location: Surrey, BC, CDN
Posts: 672
Default

David

would the Centurions in Canada also have used British Radio systems? I guess what I'm asking is, what would be the correct radio set for a Mk5 Centurion stationed in Canada?

John
Reply With Quote
  #5  
Old 03-03-19, 21:35
rob love rob love is offline
carrier mech
 
Join Date: Feb 2003
Location: Shilo MB, the armpit of Canada
Posts: 7,517
Default

The C42 was a pretty standard radio for the army in Canada starting, I believe, in the late 50s. In the early 70s, the US radios started to appear for the regular army, but a lot of the reserves continued to use the C42 radio until about 1980.

I have the equipment logistic directives at work for the Centurion. I am pretty sure it had information on which radios were used. I'll check tomorrow and post the results here if someone doesn't beat me to it.

While you don't see sales of the C42s that often these days, a big part of the reason, likely, is because they are so darn huge and heavy. Most guys don't want them in their jeeps. But they are out there, hiding in sheds and warehouses.
Reply With Quote
  #6  
Old 04-03-19, 00:30
eddy8men eddy8men is offline
AKA Rick Wedlock
 
Join Date: Dec 2009
Location: manchester
Posts: 715
Default

john i reckon your cent was set up for clansman
__________________
_______________________
1941 mk1 mortar Carrier
1941 Mk1* Carrier
1942 Mk1* Carrier
1943 T16 Carrier
1945 Mk3 Dingo
1941 Mk3 Covenanter
1941 Mk4 Churchill AVRE (now sold)
1944 Mk6 Cromwell (now sold)
1952 Mk3 Centurion
1952 ARV Centurion
1952 ARV Centurion
1953 Mk3 Centurion (breaking)
Reply With Quote
  #7  
Old 04-03-19, 00:47
eddy8men eddy8men is offline
AKA Rick Wedlock
 
Join Date: Dec 2009
Location: manchester
Posts: 715
Default

if you just want comms between driver and commander then motorbike comms set up will work well and is cheap and readily available
__________________
_______________________
1941 mk1 mortar Carrier
1941 Mk1* Carrier
1942 Mk1* Carrier
1943 T16 Carrier
1945 Mk3 Dingo
1941 Mk3 Covenanter
1941 Mk4 Churchill AVRE (now sold)
1944 Mk6 Cromwell (now sold)
1952 Mk3 Centurion
1952 ARV Centurion
1952 ARV Centurion
1953 Mk3 Centurion (breaking)
Reply With Quote
  #8  
Old 04-03-19, 04:07
jdmcm's Avatar
jdmcm jdmcm is offline
Registered User
 
Join Date: Dec 2010
Location: Surrey, BC, CDN
Posts: 672
Default

That makes sense Rick, I do plan to add a Canadian era correct radio, but it would sure be handy to have some comms especially rolling around a movie set!
Reply With Quote
  #9  
Old 04-03-19, 14:41
rob love rob love is offline
carrier mech
 
Join Date: Feb 2003
Location: Shilo MB, the armpit of Canada
Posts: 7,517
Default

From the ELD dated 4 Mar 77:

Mk5-Mk5/2

(1) Gun tank: One C42 and one AN/PRC-510 or one ANVRC-46 and one AN/VRC-53

(2) Command tank: two C42 and one AN/PRC-510 or two AN/VRC-46

MKll

(1) Gun tank: one AN/VRC-46 and one AN/VRC-53
(2) Command tank: two AN/VRC-46

ARV One C42 or one AN/VRC-46

AVLB One C42 or one AN/VRC-46 and AN/VRC-53
Reply With Quote
  #10  
Old 04-03-19, 22:56
David Dunlop David Dunlop is offline
Registered User
 
Join Date: Feb 2006
Location: Winnipeg, MB
Posts: 3,384
Default

Hello John,

If you decide to go the C42 route, send me a PM.

Cheers,

David
Reply With Quote
  #11  
Old 05-03-19, 01:47
Dan Martel's Avatar
Dan Martel Dan Martel is offline
Centurion nut
 
Join Date: Jan 2007
Location: Mississauga
Posts: 224
Default

Quote:
Originally Posted by David Wilkinson View Post
...at the JD9...
Quote:
Originally Posted by jdmcm View Post
Obviously the drivers station has to go through the RBJ.
JD9 and RBJ? Please remember that there are some less acronym-ically minded members reading your posts too.

Thanks,
Dan.
Reply With Quote
  #12  
Old 05-03-19, 02:11
David Herbert David Herbert is offline
Registered User
 
Join Date: Mar 2010
Location: Ayrshire, Scotland - previously Suffolk
Posts: 547
Default

JD9 is the 9th variant of a "junction distribution" box. Basically a router for the radios and intercom (IC) system.
RBJ is the "rotary base junction" which is the unit in the bottom of the turret which connects the electrical services including radio and intercom between the rotating turret and the stationary hull. It contains a lot of copper slip rings and carbon brushes and is the limiting factor of how many radio functions can be routed between the hull and the turret. In WW2 British tanks that had hydraulic turret traverse powered from an engine driven pump the hydraulic circuit went via the RBJ too, making it even more complicated.

David
Reply With Quote
  #13  
Old 05-03-19, 13:59
Dan Martel's Avatar
Dan Martel Dan Martel is offline
Centurion nut
 
Join Date: Jan 2007
Location: Mississauga
Posts: 224
Default

Quote:
Originally Posted by David Herbert View Post
JD9 is the 9th variant of a "junction distribution" box.

RBJ is the "rotary base junction."
Great response. Thanks very much.

Dan.
Reply With Quote
  #14  
Old 17-03-19, 22:10
David Wilkinson David Wilkinson is offline
Registered User
 
Join Date: Oct 2018
Location: Appleton ON, Canada
Posts: 10
Default

Sorry I was off for a while. Good info here. In the regular army, the US family of radios replaced the Brit C42 in the middle 60's. In most vehicle installations, except the Centurion, the American harness was used. This included the Ferret. Only in the Centurion was the total Brit harness retained till the Centurion was withdrawn from service. The junction between the US radio system and the Brit harness was done at the JD9. So all Canadian Centurions retained all the original junction boxes and wiring, headsets and handsets, tanoy microphone, IT telephone and reels cable with the green hornet hand set.
Reply With Quote
  #15  
Old 17-03-19, 22:50
David Wilkinson David Wilkinson is offline
Registered User
 
Join Date: Oct 2018
Location: Appleton ON, Canada
Posts: 10
Default

In addition. Gun tanks were equipped with 1 x 46 set (A) and 1 x 25 set (B) which could be quickly dismounted to use as a man pack. Command tanks had 2 x 46 sets plus a UHF man pack (can't remember the name) for ground air comms.
Most command tanks were equipped with the Canadian NavAid. I had one for three years and it never worked.
Reply With Quote
  #16  
Old 17-03-19, 23:06
chris vickery's Avatar
chris vickery chris vickery is offline
3RD ECHELON WKSP
 
Join Date: Feb 2003
Location: Nipissing Ontario Canada
Posts: 2,955
Default

VRC series radio gear is certainly a lot easier to come by in serviceable condition...
__________________
3RD Echelon Wksp

1968 M274A5 Mule Baifield USMC
1966 M274A2 Mule BMY USMC
1958 M274 Mule Willys US Army
1970 M38A1 CDN3 70-08715 1 CSR
1981 MANAC 3/4T CDN trailer
1943 Converto Airborne Trailer
1983 M1009 CUCV

RT-524, PRC-77s,
and trucks and stuff and more stuff and and.......

OMVA, MVPA, G503, Steel Soldiers
Reply With Quote
  #17  
Old 18-03-19, 02:50
Dan Martel's Avatar
Dan Martel Dan Martel is offline
Centurion nut
 
Join Date: Jan 2007
Location: Mississauga
Posts: 224
Default

Quote:
Originally Posted by David Wilkinson View Post
Most command tanks were equipped with the Canadian NavAid. I had one for three years and it never worked.
David,

Can you tell us more about NAVAID?

Thanks,
Dan.
Reply With Quote
  #18  
Old 18-03-19, 03:34
Ed Storey Ed Storey is offline
Registered User
 
Join Date: Feb 2003
Location: Ottawa
Posts: 1,426
Default Navaid

See this thread on NAVAID.

http://www.mapleleafup.net/forums/sh...ghlight=navaid
Reply With Quote
  #19  
Old 18-03-19, 15:13
David Wilkinson David Wilkinson is offline
Registered User
 
Join Date: Oct 2018
Location: Appleton ON, Canada
Posts: 10
Default

I couldn't get the link to work.

Navaid was a Canadian development in the 1960's. It was way ahead of its time but frought with mechanical and electronic problems. Plus, it took up alot of space even in the tank (saw it mounted in the Ferret-not much room for crew!). The gyro was a Sperry ship's unit. Very large and occupied a turret floor ammo bin directly behind the driver. The turret stowage was reconfigured to allow for the electronics and a large mechanical map board which was horizontal and mounted between the loader and comd. The map board had a ball resolver and a lighted arrow. This would crawl along under the 1/50k map and project an arrow through the map sheet with the location and direction of the tank. The ball was driven by the speedometer and the gyro compass. The technical limitations of the system were extensive.

The best use of the map board was as a work space for the loader to make peanut butter sandwiches for the crew! We used to say that we got the Brits back for selling us the agony wagon, by selling them Navaid. They were the only foreign sale.
Reply With Quote
  #20  
Old 18-03-19, 16:20
Ed Storey Ed Storey is offline
Registered User
 
Join Date: Feb 2003
Location: Ottawa
Posts: 1,426
Default Navaid

Of course there is always the Forum search function, just type in NAVAID.
Reply With Quote
  #21  
Old 18-03-19, 16:34
David Wilkinson David Wilkinson is offline
Registered User
 
Join Date: Oct 2018
Location: Appleton ON, Canada
Posts: 10
Default

True Just checked and good info there. Cheers
Reply With Quote
  #22  
Old 18-03-19, 16:52
Mike Cecil Mike Cecil is offline
Registered User
 
Join Date: Jun 2006
Location: Cody, Wyoming, USA
Posts: 2,365
Default Navaid & Aust Cents

Navaid: Australia came ... saw ... and said No Thanks!

Mike
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Canadian T72 tanks maple_leaf_eh Post-war Military Vehicles 19 23-07-23 00:39
Canadian Centurion tanks question jdmcm The Armour Forum 132 15-04-19 02:43
Ferret Intercom System Kevin MacDonald Post-war Military Vehicles 3 20-07-17 22:33
Canadian Suspension system... Alex Blair (RIP) The Softskin Forum 0 10-01-05 14:51
Beldam's Canadian Centurion Gun Tanks book... Dana Nield For Sale Or Wanted 0 05-12-03 03:41


All times are GMT +2. The time now is 14:32.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © Maple Leaf Up, 2003-2016