#11
|
||||
|
||||
Quote:
The Cup, Discharger is fitted to the nosecap of the No1 Mk3 Rifle, and is not supported by the barrel. On firing, the recoil of launching the grenade is transmitted through the Cup, to the Nosecap, and then to the timber stock. As Lynn has said, the wire prevents the timber from splitting from this recoil. The No4 Mk1 Rifle was an improvement on this design, where the grenade launching spigot was fitted to the bayonet lug, which is part of the barrel. There is no need to wire wrap the No4 Rifle for grenade launching, as the stresses of firing are not transmitted through the timber stock, and there is no need to provide hand protection or grip. It should also be noted that the No1 Mk3 SMLE has a thicker heavier barrel that the No4 Rifle, so if either barrel was liable to burst from excessive pressure, the No4 would go first.
__________________
You can help Keep Mapleleafup Up! See Here how you can help, and why you should! |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Door Resto | Barry Churcher | The Restoration Forum | 13 | 15-05-22 15:36 |
FAT cab 13 No 9 resto | Mrs Vampire | The Softskin Forum | 27 | 29-09-21 06:11 |
C15A resto | harrygrey382 | The Restoration Forum | 9 | 08-06-15 09:40 |
another CAN m37 resto | Steve Wilson | The Restoration Forum | 11 | 25-08-12 15:57 |
m 37 resto in new brunswick | pauljboudreau | Post-war Military Vehicles | 118 | 07-03-11 22:29 |