MLU FORUM  

Go Back   MLU FORUM > MILITARY VEHICLES > The Softskin Forum

Notices

Reply
 
Thread Tools Display Modes
  #121  
Old 30-08-18, 06:32
Lang Lang is offline
Registered User
 
Join Date: Jan 2004
Location: Brisbane Australia
Posts: 1,650
Default

Here is right door info.

http://www.flagshipdetroit.org/FSD/Right-Side_Door.html

Lang
Attached Thumbnails
DC3Right.jpg  
Reply With Quote
  #122  
Old 30-08-18, 13:27
Ganmain Tony's Avatar
Ganmain Tony Ganmain Tony is offline
Registered User
 
Join Date: Jul 2009
Location: Ganmain NSW Australia
Posts: 1,242
Default Thanks Hanno

Quote:
Originally Posted by Hanno Spoelstra View Post
Looking good, Tony

Any thoughts about the cargo body? Meanwhile Robert Sexton has had Drawings for No1 Australian body made up.


Attachment 101870
Apparently this particular truck according to the AWM records was a fully imported truck from Canada and came with a 2C1 body.

I have one, (again generously given to me from Keith) suffice to say it is a "restorers delight".

I really really like the look of the No1 body and the effort Robert went to is certainly not lost on me.

At this stage Ill be trying to fix the Canadian body.

Having said all that, I have an Australian toolbox & spare wheel carrier that will be going on it.

I would like to find the original Canadian version with the clam shell spare, but I wont hold my breath till one turns up.
__________________
Pax Vobiscum.......may you eat three meals a day & have regular bowel movements.
Reply With Quote
  #123  
Old 30-08-18, 16:39
Mike Cecil Mike Cecil is offline
Registered User
 
Join Date: Jun 2006
Location: Cody, Wyoming, USA
Posts: 2,365
Default

Hi Tony,

Your truck has had a roof-swap, too, as you have an Australian Ford roof and roof hatch. So putting the CTB 2C1 body on it would be good and look great (but very heavy compared to the Australian all-steel body), but it will still mean you'll need to look out for a Canadian roof/roofhatch and a Canadian spare wheel carrier/tool box if you wish to bring it back to original/'as delivered' configuration.

Great job you are doing.

Mike

Last edited by Mike Cecil; 30-08-18 at 20:08.
Reply With Quote
  #124  
Old 13-09-18, 06:41
Ganmain Tony's Avatar
Ganmain Tony Ganmain Tony is offline
Registered User
 
Join Date: Jul 2009
Location: Ganmain NSW Australia
Posts: 1,242
Default Roof

Thanks Mike for the kind words and helpful suggestions.

Spot on with the roof. I had no other option as the original roof has been chopped to accomodate the modification of the windscreen.

This roof that we repaired and painted was in pretty good nick and the only one available to me.

If anyone has a Canadian Ford roof I would be very interested to hear from you.

Picture shows completed rear curtain arrangement.
Attached Thumbnails
CMP.jpg  
__________________
Pax Vobiscum.......may you eat three meals a day & have regular bowel movements.
Reply With Quote
  #125  
Old 16-09-18, 11:06
Ganmain Tony's Avatar
Ganmain Tony Ganmain Tony is offline
Registered User
 
Join Date: Jul 2009
Location: Ganmain NSW Australia
Posts: 1,242
Default Handbrake cables

Been a bloody fiddly job. Got there in the end.

Boots are from Macs but I dont think they are the correct ones.

They will do the job required none the less.
Attached Thumbnails
Cables Assembled.jpg  
__________________
Pax Vobiscum.......may you eat three meals a day & have regular bowel movements.
Reply With Quote
  #126  
Old 16-09-18, 11:27
Ganmain Tony's Avatar
Ganmain Tony Ganmain Tony is offline
Registered User
 
Join Date: Jul 2009
Location: Ganmain NSW Australia
Posts: 1,242
Default More

Finally all the brake lines are in.

Not sure why but the last picture is on its side. Any chance one of the moderators could fix please?
Attached Thumbnails
Brake Line left rear.jpg   Rear Brake lines.jpg   Rear Brake Lines 002.jpg  
__________________
Pax Vobiscum.......may you eat three meals a day & have regular bowel movements.
Reply With Quote
  #127  
Old 16-09-18, 11:30
Keith Webb's Avatar
Keith Webb Keith Webb is offline
Film maker, CMP addict
 
Join Date: Feb 2003
Location: Macleod, Victoria, Australia
Posts: 8,216
Default Correct boots

Quote:
Originally Posted by Ganmain Tony View Post
Been a bloody fiddly job. Got there in the end.

Boots are from Macs but I dont think they are the correct ones.

They will do the job required none the less.
You should have asked. I have a couple NOS.
__________________
Film maker

42 FGT No8 (Aust) remains
42 FGT No9 (Aust)
42 F15
Keith Webb
Macleod, Victoria Australia
Also Canadian Military Pattern Vehicles group on Facebook
https://www.facebook.com/groups/canadianmilitarypattern
Reply With Quote
  #128  
Old 16-09-18, 11:32
Keith Webb's Avatar
Keith Webb Keith Webb is offline
Film maker, CMP addict
 
Join Date: Feb 2003
Location: Macleod, Victoria, Australia
Posts: 8,216
Default Rotate

Quote:
Originally Posted by Ganmain Tony View Post
Finally all the brake lines are in.

Not sure why but the last picture is on its side. Any chance one of the moderators could fix please?
Here you go...
Attached Thumbnails
Rear Brake Lines 002.jpg  
__________________
Film maker

42 FGT No8 (Aust) remains
42 FGT No9 (Aust)
42 F15
Keith Webb
Macleod, Victoria Australia
Also Canadian Military Pattern Vehicles group on Facebook
https://www.facebook.com/groups/canadianmilitarypattern
Reply With Quote
  #129  
Old 16-09-18, 11:38
Ganmain Tony's Avatar
Ganmain Tony Ganmain Tony is offline
Registered User
 
Join Date: Jul 2009
Location: Ganmain NSW Australia
Posts: 1,242
Default Bracket

Interesting.... have forum members seen these before?

(Ive no doubt some will have)

Im referring to the bracket attached to the rear spring that clamps to the handbrake cable.

Same thing again chaps. Last image is on its side (sorry).

They look like they would have frequently broken but do lift the cable somewhat out of the way of prospective branches and stumps.
Attached Thumbnails
Cable Bracket.jpg   Blitz 002.jpg   Blitz 001.jpg  
__________________
Pax Vobiscum.......may you eat three meals a day & have regular bowel movements.
Reply With Quote
  #130  
Old 16-09-18, 11:43
Ganmain Tony's Avatar
Ganmain Tony Ganmain Tony is offline
Registered User
 
Join Date: Jul 2009
Location: Ganmain NSW Australia
Posts: 1,242
Default Yep

Quote:
Originally Posted by Keith Webb View Post
You should have asked. I have a couple NOS.
Ok, asking now...

Pizza's and beer definitely on me next year at Corowa Keefy.

Additional reimbursement, if required, goes without saying.
__________________
Pax Vobiscum.......may you eat three meals a day & have regular bowel movements.
Reply With Quote
  #131  
Old 16-09-18, 13:35
Grant Bowker Grant Bowker is offline
Registered User
 
Join Date: Jul 2006
Location: Ottawa, Canada
Posts: 2,285
Default Brake cable brackets

I've seen remnants of these on springs but never the complete thing in place so it seems you are right about them often being broken. I hope you can put up dimensions for them so others can recreate them - including me for the 15cwt CMP trailer I'm working on (the trailer uses 15cwt Ford springs). Useful dimensions would be: stock size, spacing between holes and hole sizes.

Last edited by Grant Bowker; 16-09-18 at 13:56.
Reply With Quote
  #132  
Old 17-09-18, 00:37
Keith Webb's Avatar
Keith Webb Keith Webb is offline
Film maker, CMP addict
 
Join Date: Feb 2003
Location: Macleod, Victoria, Australia
Posts: 8,216
Default Beer and Pizza

Quote:
Originally Posted by Ganmain Tony View Post
Ok, asking now...

Pizza's and beer definitely on me next year at Corowa Keefy.

Additional reimbursement, if required, goes without saying.
Haha, look forward to it! Those little clips are interesting, I've seen them before but I don't think I've ever seen them connected.
__________________
Film maker

42 FGT No8 (Aust) remains
42 FGT No9 (Aust)
42 F15
Keith Webb
Macleod, Victoria Australia
Also Canadian Military Pattern Vehicles group on Facebook
https://www.facebook.com/groups/canadianmilitarypattern
Reply With Quote
  #133  
Old 17-09-18, 04:39
Jacques Reed Jacques Reed is offline
VMVC
 
Join Date: Jul 2012
Location: Victoria Australia
Posts: 858
Default Dimensions of handbrake cable brackets

Quote:
Originally Posted by Grant Bowker View Post
I've seen remnants of these on springs but never the complete thing in place so it seems you are right about them often being broken. I hope you can put up dimensions for them so others can recreate them - including me for the 15cwt CMP trailer I'm working on (the trailer uses 15cwt Ford springs). Useful dimensions would be: stock size, spacing between holes and hole sizes.
Hi Grant et al,

Thought I would jump in here to get the ball rolling. I had two springs laying around so it was easy to get to the broken remnants to get the dimensions as a starter. See attached photo.

All we need is the length from the spring clip hole to the cable clamp hole. The rest can be pretty well deduced. I would think the clamp hole would be 9/32" diameter to accommodate a 1/4" bolt which it looks like in the photos.

Interestingly the brackets were mounted on different spring clips and not directly across from each other.

Hope this is of some help.

Cheers
Attached Thumbnails
IMG_0137 mlu.jpg   IMG_0132.JPG   IMG_0135.JPG  
__________________
F15-A 1942 Battery Staff

Jacques Reed

Last edited by Jacques Reed; 17-09-18 at 05:05. Reason: Change size of cable clamp bolt hole
Reply With Quote
  #134  
Old 17-09-18, 14:21
Ganmain Tony's Avatar
Ganmain Tony Ganmain Tony is offline
Registered User
 
Join Date: Jul 2009
Location: Ganmain NSW Australia
Posts: 1,242
Default OK Grant

Hoping this is of some help.

Bolt head and nut 7/16 (or 11mm spanner/socket)

Third picture shows total length of clamp strap.

I wrapped the tape measure around the strap.

Images arent great but the focus should be on the tape measure.

First image is misleading, due to phone camera lens but the tape measure is positioned tip to tip from one end of the strap to the other.

Thanks Jacques for some incredibly helpful info.
Attached Thumbnails
clamps05.jpg   clamps06.jpg   clamps04.jpg   Clamps02.jpg   clamps03.jpg  

__________________
Pax Vobiscum.......may you eat three meals a day & have regular bowel movements.
Reply With Quote
  #135  
Old 17-09-18, 16:06
Grant Bowker Grant Bowker is offline
Registered User
 
Join Date: Jul 2006
Location: Ottawa, Canada
Posts: 2,285
Default

Thank you to both of you for the dimensions and photos. Based on the photo, it looks as if the distance between the holes (center to center) is about 3-1/2 inches. Is this close?
7/16 across flats usually translates to a 1/4 thread (frequently fine thread on CMP).
The F15A-01 parts list suggests there were 3 versions of the clip: 01-2279 clip emergency brake conduit (an off the shelf part), C01Q-2279A clip rear brake cable (CMP unique) and C01Q-2279B (CMP unique, to be supplied after C01Q-2279A are depleted). I've no idea what the differences between versions may be.
Reply With Quote
  #136  
Old 18-09-18, 00:14
Jacques Reed Jacques Reed is offline
VMVC
 
Join Date: Jul 2012
Location: Victoria Australia
Posts: 858
Default Dimensions of handbrake cable bracket

Hi Tony and Grant,

Thanks Tony for supplying those extra dimensions. Should be an easy fabrication.
I'm betting it is 3-1/2" between centres of the bolt holes knowing how designers like to keep things simple.

Those bolts are very common on CMP's. They are 1/4-20 UNC and used to hold the dash panel, radiator grills, and windscreen hinges to name a few.

As this is a forum to exchange hints and tips here's a good one I have used occasionally which may be of interest:
Measuring things that have curvature or bends is hard to do with a tape measure due to its rigidity. I keep a bit of plastic banding tape used on heavy packages and run that around the object with appropriate tick marks then lay the banding tape out flat and measure that.

In the old days that tape was handy for opening car doors if you locked yourself out but modern designs render it ineffective.

Cheers,
__________________
F15-A 1942 Battery Staff

Jacques Reed
Reply With Quote
  #137  
Old 18-09-18, 11:08
Ganmain Tony's Avatar
Ganmain Tony Ganmain Tony is offline
Registered User
 
Join Date: Jul 2009
Location: Ganmain NSW Australia
Posts: 1,242
Default Bit more

Quote:
Originally Posted by Jacques Reed View Post
Hi Tony and Grant,

As this is a forum to exchange hints and tips here's a good one I have used occasionally which may be of interest:
Measuring things that have curvature or bends is hard to do with a tape measure due to its rigidity. I keep a bit of plastic banding tape used on heavy packages and run that around the object with appropriate tick marks then lay the banding tape out flat and measure that.

In the old days that tape was handy for opening car doors if you locked yourself out but modern designs render it ineffective.

Cheers,
Keeping in mind what Jacques has mentioned above... I have continued to do measurements the fool way I have previously posted.

Jacques me

The holes middle to middle are 3 and 1/4 inch.

Repeat 3 and 1/4 inch.
Attached Thumbnails
Clamp07.jpg  
__________________
Pax Vobiscum.......may you eat three meals a day & have regular bowel movements.
Reply With Quote
  #138  
Old 18-09-18, 22:49
Jacques Reed Jacques Reed is offline
VMVC
 
Join Date: Jul 2012
Location: Victoria Australia
Posts: 858
Default dimension of handbrake cable bracket

Hi Tony,

Thanks for that measurement. Glad I didn't put any money down on 3-1/2" between centres!

Whatever gets the job done is OK by me too. As most restorers know there are a dozen different ways to do the same job. Just look at the posts on CMP tyre removal and installation!

Thanks again.

Cheers
__________________
F15-A 1942 Battery Staff

Jacques Reed
Reply With Quote
  #139  
Old 24-09-18, 06:23
Ganmain Tony's Avatar
Ganmain Tony Ganmain Tony is offline
Registered User
 
Join Date: Jul 2009
Location: Ganmain NSW Australia
Posts: 1,242
Default Extraordinary

Just amazing the condition of the bearings and other diff internals.
Hard to believe this stuff is nearly eighty years old.

Tried to get a shot of the Ford script on the bearing cup. Can sort of make it out.

New seals arrived 2 months after I had ordered them.
Attached Thumbnails
CMP 01.jpg   CMP 02.jpg   CMP 03.jpg   CMP 04.jpg   CMP 05.jpg  

__________________
Pax Vobiscum.......may you eat three meals a day & have regular bowel movements.
Reply With Quote
  #140  
Old 25-09-18, 12:25
Ganmain Tony's Avatar
Ganmain Tony Ganmain Tony is offline
Registered User
 
Join Date: Jul 2009
Location: Ganmain NSW Australia
Posts: 1,242
Default Cable adjustment

Appears to be to tight on passenger side. NOS cables may stretch a bit over time but there is a bit more to it.

Can only be the adjusting pin in the emergency brake lever. I thought its current postion had the lever as far back as it goes but the shoes are hard on the drum.

(Sigh) I'll have another go...tomorrow night.
Attached Thumbnails
cmp 03.jpg   cmp 04.jpg   2018-08-22 20.14.20.jpg  
__________________
Pax Vobiscum.......may you eat three meals a day & have regular bowel movements.

Last edited by Ganmain Tony; 25-09-18 at 23:24. Reason: stutter
Reply With Quote
  #141  
Old 25-09-18, 22:37
Keith Webb's Avatar
Keith Webb Keith Webb is offline
Film maker, CMP addict
 
Join Date: Feb 2003
Location: Macleod, Victoria, Australia
Posts: 8,216
Default Adjustments

Maybe the anchor pins for the brake shoes need some adjustment?

Quote:
Originally Posted by Ganmain Tony View Post
Appears to be to tight on passenger side. NOS cables may stretch a bit over time but there is a bit more to it.

Can only be the adjusting pin in the emergency brake lever. I thought its current postion had the lever as far back as it goes but the shoes are hard on the drum.

(Sigh) I'll have have another go...tomorrow night.
__________________
Film maker

42 FGT No8 (Aust) remains
42 FGT No9 (Aust)
42 F15
Keith Webb
Macleod, Victoria Australia
Also Canadian Military Pattern Vehicles group on Facebook
https://www.facebook.com/groups/canadianmilitarypattern
Reply With Quote
  #142  
Old 25-09-18, 23:31
Jacques Reed Jacques Reed is offline
VMVC
 
Join Date: Jul 2012
Location: Victoria Australia
Posts: 858
Default Hand brake adjustment

Hi Tony,

You probably know this, but that slotted wheel at the top of the shoes is also an adjustment for the distance between the shoes. There is an eccentric pin behind it which when the wheel is rotated moves the top of the shoes further in or out.

This may also affect the shoes making contact with the drum even with the brake lever all the way off.

Cheers,
__________________
F15-A 1942 Battery Staff

Jacques Reed
Reply With Quote
  #143  
Old 26-09-18, 12:36
Ganmain Tony's Avatar
Ganmain Tony Ganmain Tony is offline
Registered User
 
Join Date: Jul 2009
Location: Ganmain NSW Australia
Posts: 1,242
Default Good advice

Quote:
Originally Posted by Jacques Reed View Post
Hi Tony,

You probably know this, but that slotted wheel at the top of the shoes is also an adjustment for the distance between the shoes. There is an eccentric pin behind it which when the wheel is rotated moves the top of the shoes further in or out.

This may also affect the shoes making contact with the drum even with the brake lever all the way off.

Cheers,
Thanks Keefy and Jacques.

Yes that slotted wheel is the adjusting pin in the manual. It was seized and I didnt want to go near it.
The cam also appeared to be at its best setting for the drums to be at their closest.

I have bitten the bullet, removed the lever and applied some heat to it then a quick hit of CRC.

It has come free, so I will play with it tomorrow night and see how it goes.

I realise this sounds bit dumb, but my logic was "I didnt touch that" so if it worked before I took the truck to bits, the problem must lie in the components I have altered.

We will find out!!
__________________
Pax Vobiscum.......may you eat three meals a day & have regular bowel movements.
Reply With Quote
  #144  
Old 27-09-18, 13:38
Ganmain Tony's Avatar
Ganmain Tony Ganmain Tony is offline
Registered User
 
Join Date: Jul 2009
Location: Ganmain NSW Australia
Posts: 1,242
Default Cable continued

OK so... anchor pins are where they are supposed to be.
Eccentric cams where they are supposed to be.
Handbrake lever and eccentric behind it have been set up correctly

The cable is simply not long enough (AS IT HAS COME OUT OF THE BOX)

A solution is... to slice a section of the outer part (ie that the cable slides through) at one end.

Probably the end that slides into the backing plate. This will enable the cable to attach to the hand brake lever without starting to pull it, which starts to move the shoes onto the drum.

Suggestions welcome
Attached Thumbnails
HBCMP02.jpg   HBCMP01.jpg  
__________________
Pax Vobiscum.......may you eat three meals a day & have regular bowel movements.
Reply With Quote
  #145  
Old 27-09-18, 14:17
Grant Bowker Grant Bowker is offline
Registered User
 
Join Date: Jul 2006
Location: Ottawa, Canada
Posts: 2,285
Default

Questions:
Is it a NOS cable or a modern "will fit" part? It's worth noting that F15 is listed as using *C101W-2275 cables and F15A *C01Q-2275A in case you ended up with the "wrong" part. I don't know the difference between the two cables. LWD parts show a cable tagged with the "correct" part number https://www.lwdparts.com/product/cable-handbrake-f15/ They also list the F15A cable and might be willing to measure length differences (sheath and overall) if asked.
Is the cable fully seating in the holding bracket on the backing plate? (and at the other end?)
Would it be better to take some (but less) off both ends of the sheath? You see less rust than I do but it might prevent formation of a rust ridge in the backing plate bracket that could block future removal.
Reply With Quote
  #146  
Old 28-09-18, 01:43
Jacques Reed Jacques Reed is offline
VMVC
 
Join Date: Jul 2012
Location: Victoria Australia
Posts: 858
Default F15 or F15-A handbrake cable?

Quote:
Originally Posted by Grant Bowker View Post
Questions:
Is it a NOS cable or a modern "will fit" part? It's worth noting that F15 is listed as using *C101W-2275 cables and F15A *C01Q-2275A in case you ended up with the "wrong" part. I don't know the difference between the two cables.
Hi Tony,

Following on from Grant's comments if there is a major difference in lengths between an F15 And an F15-A handbrake cable I can at least confirm what is the F15-A cable length which may be of help.

The outer conduit is 39-3/4" long and the inner cable is 52-1/4" long giving a difference in the two lengths of 12-1/2"

I am very sure these measurements are accurate as they came off two NOS cables I bought along with the NOS backing plates that they were attached to. I took these measurement a long time ago in case I ever had to replace a cable. They work perfectly on my F15-A (and will be even better when I bend up the clips from the dimensions and photos you supplied!)

Hope this may be of some help.

Cheers,
__________________
F15-A 1942 Battery Staff

Jacques Reed
Reply With Quote
  #147  
Old 28-09-18, 02:36
Grant Bowker Grant Bowker is offline
Registered User
 
Join Date: Jul 2006
Location: Ottawa, Canada
Posts: 2,285
Default

I don't normally like to cast doubt on field measurements of original parts....but....
Parts list F15A-01 gives a length of 51-3/4 for part *C01Q-2275A (cable-hand brake-assembly),
Parts list F15-01 doesn't give a length for *C101W-2275,
Neither manual gives alternate numbers for earlier or later production.
The same part numbers and length notes appear in the earlier parts lists that cover all models.
I'm puzzled as when I was shortening a pair of *C01Q-2275B cables (originally 86 inches long) to recreate *C01Q-2275A cables for the 15cwt GS trailer I thought the measurements needed to be nearer those Jacques gave than the "official" version.
Reply With Quote
  #148  
Old 28-09-18, 03:59
Jacques Reed Jacques Reed is offline
VMVC
 
Join Date: Jul 2012
Location: Victoria Australia
Posts: 858
Default Handbrake cable measurements

Hi Grant,

I agree, field measurements can be misleading however it all depends on where you are taking the measurements from versus what the guy putting together the parts manual measures, or the second or third hand measurements he receives.

My measurements were taken from the ends of the outer conduit at the end of the larger diameter sleeves. In the case of the inner cable, the measurements were from the outer end of the ball to the end of the threaded rod on the equalizer side. If someone only measured the exposed cable a different result would be obtained.

The cables were NOS, perfect shape, never kinked, and I compared both cables and obtained the same results. When installed, everything worked perfectly as intended.

If you think about it, the only critical measurement is the difference between the inner cable and outer conduit. The conduit could be 2, 4, 6 inches longer but as long as the inner cable is 12-1/2" longer the system will work just fine.

The parts manual is a great source of info but as I have found out there are a number of inconsistencies throughout. Looks like you may have found the same thing in regard to the specified measurement with your trailer cables.

In using a parts manual, one must keep an open mind and accept that it may not be gospel.

Cheers,
__________________
F15-A 1942 Battery Staff

Jacques Reed

Last edited by Jacques Reed; 28-09-18 at 04:13. Reason: Added critical measurment comment
Reply With Quote
  #149  
Old 28-09-18, 13:32
Ganmain Tony's Avatar
Ganmain Tony Ganmain Tony is offline
Registered User
 
Join Date: Jul 2009
Location: Ganmain NSW Australia
Posts: 1,242
Default Outstanding

Grant and Jacques,

My sincere thanks to you both. Very, very helpful discussion.

I will have another crack tomorrow and get back with my findings.

Sent an email to LWD parts. Hopefully they will get back to me as well.
__________________
Pax Vobiscum.......may you eat three meals a day & have regular bowel movements.
Reply With Quote
  #150  
Old 29-09-18, 00:19
Jacques Reed Jacques Reed is offline
VMVC
 
Join Date: Jul 2012
Location: Victoria Australia
Posts: 858
Default F15 handbrake cable- Conduit support, final thought

Hi Tony,

Glad to be of some help.

Just as a final thought on the subject; assuming 12-1/2" is the difference in the lengths for both F15 and F15-A cables the only other thing that could affect the cable pulling on the brake shoes would be the position of the Support- Brake Conduit, part Nos. 01T 2501 (right side) and 01T 2502 (left side) in the case of a F15-A. I am assuming the F15 truck uses the same part but that could be a wrong assumption.

If these are bent, or modified, the distance to the equalizer arms will be different to the designed length perhaps causing the inner cable to be "pulled" even when when the handbrake lever is fully off.

I have attached a photo of the setup of the handbrake equalizer and the conduit supports on my F15-A which may help you and others.

Cheers,
Attached Thumbnails
IMG_0172.JPG  
__________________
F15-A 1942 Battery Staff

Jacques Reed
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +2. The time now is 07:50.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © Maple Leaf Up, 2003-2016