Engine Cover Rifle Rest data

[RichardT10829]

Hey folks.... in amongst everything else thats on the go, I have some spare wood to make the last rifle lrest on the engine cover, can anyone give me the measurements of the metal bracket that it mounts to ?


pics would help a load too

[rob love]

Midwest military sells them and has a photo of it which I have stolen and posted below. I am used to one that tapers at the front rather than the fabricated style John sells. Not sure if his is a later pattern.

[RichardT10829]

How do you mean taper matey ? Does anyone have any measurements ?

[Lynn Eades]

If you have the holes in the cover, you only need the height of one end. Then it is level with the track guard. If you follow?

[Bruce Parker (RIP)]

Originally Posted by rob love

Midwest military sells them and has a photo of it which I have stolen and posted below. I am used to one that tapers at the front rather than the fabricated style John sells. Not sure if his is a later pattern.

Outside dimensions are 22-5/16" long, 7" tall at the back and 4-3/4" at the front. The item is made from 2" by 3/16" stock and the taper Rob is talking about is at the front. The 4-3/4" vertical piece goes from 2" at the top to 3" at the bottom (ie. not a T as shown in the pic). The inward bends at the bottom are (again outside dimensions) 1" at the rear and 1-1/16" at the front. Hole spacing is 1" apart on the rear foot and 2" apart on the front.

The wood (or rubber) bumper is 2" wide by 22" long. Height about 1" for wood. There are 5 holes, 5" apart running down the middle and centred front/rear (such that there is 1" from the ends to the first and last holes).

[RichardT10829]

Awesome thanks matey.

[kevin powles]

Rich, I lent one of those brackets to Rick well over a year ago, he should be brining it to war and peace 'fingers crossed', you are quite welcome to borrow it.

Kev.

[eddy8men]

don't worry kev I will bring it along with the rest of the stuff I never ended up copying, oh well maybe next time

[kevin powles]

Originally Posted by eddy8men

don't worry kev I will bring it along with the rest of the stuff I never ended up copying, oh well maybe next time

Rick, I'm going to make you the carrier stuff so no need to worry.

What's your arrangements for war and peace?.

Kev.

[eddy8men]

cheers kev

got to get the Cromwell sorted and then head down to kent around tues/weds.
what day are you going this year ?

rick

[kevin powles]

Originally Posted by eddy8men

cheers kev

got to get the Cromwell sorted and then head down to kent around tues/weds.
what day are you going this year ?

rick

Rick, Going Tuesday morning, Why don't you put that fine piece of "British Armour" on the WW2 display field were it belongs. Do an "Operation Goodwood" display, Singe can book it in.

Kev.;-)

[eddy8men]

going in with the tank museum lot, so it will be next to the valentine dd and ian galliers is putting his comet in as well so all the british tanks will be together

[kevin powles]

Originally Posted by eddy8men

going in with the tank museum lot, so it will be next to the valentine dd and ian galliers is putting his comet in as well so all the british tanks will be together

Rick, isn't that pitch about 10 yards from the main beer tent??!?.

Kevin.

[eddy8men]

I didn't know that