MLU FORUM  

Go Back   MLU FORUM > MILITARY VEHICLES > The Softskin Forum

Notices

Reply
 
Thread Tools Display Modes
  #1  
Old 13-12-14, 20:52
Hanno Spoelstra's Avatar
Hanno Spoelstra Hanno Spoelstra is offline
MLU Administrator
 
Join Date: Feb 2003
Location: The Netherlands
Posts: 14,401
Default Another Indian Pattern odd job: "C291QH 4x4 FAT for Royal Engineers"

In David Hayward's lists of S/M (Supply Mechanical) contracts, S/M 2256 is listed with 480 examples of C291QH chassis exported to India. These were labelled as "4 x 4 F.A.T. for Royal Engineers", and until now there wasn't a clear picture of what this vehicle looked like. Just earlier on, I stumbled upon an old thread and found the answer was right here under my nose on MLU.

C291QH is mentioned in a "FORD ARMOURED VEHICLES Chassis Instruction Book" which lists a "Modified G.T. Chassis 4x4 C291QH":

Click image for larger version

Name:	Ford C291QH chassis.jpg
Views:	20
Size:	35.9 KB
ID:	69815

Now, the C291QH is listed in an Instruction Book for Armoured General Purpose Vehicles together with it's sister chassis C291QR. As the latter was used for the Indian Pattern Wheeled Armoured Carrier, I think it is logical to deduce the latter chassis was used for the Indian Pattern 4x4 Armoured Truck - see the scan from Bart Vanderveen's book Historic Military Vehicle Directory:

Click image for larger version

Name:	Indian Pattern 4x4 Armoured Truck_resized 2.jpg
Views:	21
Size:	109.9 KB
ID:	69817 Click image for larger version

Name:	Indian Pattern 4x4 Armoured Truck_resized.jpg
Views:	19
Size:	54.0 KB
ID:	69816

The Indian Pattern 4x4 Armoured Truck has a low nose, necessitating a low-mounted radiator. If you take a close look at the C291QH chassis, one will note the radiator is mounted lower in the chassis, like in this C19QHF chassis:

Click image for larger version

Name:	ND-103.jpg
Views:	16
Size:	43.7 KB
ID:	69813 Click image for larger version

Name:	ND-105.jpg
Views:	16
Size:	38.4 KB
ID:	69814

According to the manual it has a single 12-1/4 gallon tank plus an auxiliary tank of unknown size to be installed when the hull was fitted.

H.
Reply With Quote
  #2  
Old 14-12-14, 23:07
Hanno Spoelstra's Avatar
Hanno Spoelstra Hanno Spoelstra is offline
MLU Administrator
 
Join Date: Feb 2003
Location: The Netherlands
Posts: 14,401
Default

Of course questions remain:

1) What did "H" stand for exactly? I can be deduced it stands for a the configuration of a standard FGT chassis, but without winch, a low-mounted radiator, amended fuel tank configuration and possibly some more small alterations to make it fit for purpose as the chassis of an armoured truck.

2) Why was it labelled "for Royal Engineers"? Did they carry out the conversions of the Indian Pattern 4x4 Armoured Truck, or were they the intended users?

3) How many Indian Pattern 4x4 Armoured Trucks were built?

CMPs - fascinating stuff, isn't it?!?

H.
Reply With Quote
  #3  
Old 14-12-14, 23:26
Hanno Spoelstra's Avatar
Hanno Spoelstra Hanno Spoelstra is offline
MLU Administrator
 
Join Date: Feb 2003
Location: The Netherlands
Posts: 14,401
Default

Seeing the low-mounted radiator reminded me of another Indian Pattern odd job: the so-called Indian pattern FATs with "armoured cab":

Click image for larger version

Name:	indian_fat_5.jpg
Views:	18
Size:	37.8 KB
ID:	69842 Click image for larger version

Name:	indian_fat_4.jpg
Views:	16
Size:	43.1 KB
ID:	69845 Click image for larger version

Name:	odd jod2.jpg
Views:	25
Size:	42.2 KB
ID:	69846

Note: I don't think it was actually a Cab 13 clad in armour, but rather a makeshift Indian cab. The cab looks too thin for armour plating, it is not rivetted and there is no armour in front of the radiator.

But I am now pretty much convinced these were based on the C291QH chassis. Just compare the level of the front edge of the cab to the top of the radiator on the bare chassis:

Name:  knilarmouredcmpskit (1).jpg
Views: 484
Size:  60.8 KB Click image for larger version

Name:	ND-103.jpg
Views:	14
Size:	43.7 KB
ID:	69849

The makeshift Indian sheetmetal cab makes sense when out of 480 chassis delivered a number were not converted into the Indian Pattern 4x4 Armoured Truck. Not having any cab components, they must have made up a cab from mostly flat segments, and fitted it with the cargo body normally found on the Indian Pattern FAT.
Reply With Quote
  #4  
Old 14-12-14, 23:35
Hanno Spoelstra's Avatar
Hanno Spoelstra Hanno Spoelstra is offline
MLU Administrator
 
Join Date: Feb 2003
Location: The Netherlands
Posts: 14,401
Default

Quote:
Originally Posted by Hanno Spoelstra View Post
3) How many Indian Pattern 4x4 Armoured Trucks were built?
This picture shows at least two, reportedly in Pakistani army service:

Name:  indianarmouredcmppak.jpg
Views: 479
Size:  24.9 KB
Reply With Quote
  #5  
Old 15-12-14, 00:04
Lynn Eades Lynn Eades is offline
Bluebell
 
Join Date: May 2003
Location: Tauranga, New Zealand
Posts: 5,534
Default

Hanno, there were 3 designs, with the latest having a near vertical (short) steering column. The driver sat between the chassis rails (the floor fixed to the underside of the chassis???) and the master cylinders being above the hanging clutch and brake pedals. (hydraulic throttle as well)Low silhouette was "in", in 1943. The C291QH was 42-43 101 1/4wb.(third design) (modified FAT Chassis) Only two fuel tanks.
The 1941 C19QHF was134 1/4wb. Modified from CO1QF 3 ton Chassis. This had 4 full sized fuel tanks.
The 2nd design (1941-42) C191QRF was also 101 1/4 wb. 2 tanks.
1st design had 16" wheels the 2nd and 3rd designs had 20" wheels.
"H" is for Hanno!!!
I hope that helps a little.
__________________
Bluebell

Carrier Armoured O.P. No1 Mk3 W. T84991
Carrier Bren No2.Mk.I. NewZealand Railways. NZR.6.
Dodge WC55. 37mm Gun Motor Carriage M6
Jeep Mb #135668
So many questions....
Reply With Quote
  #6  
Old 23-12-14, 11:51
Hanno Spoelstra's Avatar
Hanno Spoelstra Hanno Spoelstra is offline
MLU Administrator
 
Join Date: Feb 2003
Location: The Netherlands
Posts: 14,401
Default

Quote:
Originally Posted by Lynn Eades View Post
Hanno, there were 3 designs, with the latest having a near vertical (short) steering column. The driver sat between the chassis rails (the floor fixed to the underside of the chassis???) and the master cylinders being above the hanging clutch and brake pedals. (hydraulic throttle as well)Low silhouette was "in", in 1943.

[snip]

The 2nd design (1941-42) C191QRF was also 101 1/4 wb. 2 tanks.
1st design had 16" wheels the 2nd and 3rd designs had 20" wheels.
From the article "India's Ford Wheeled Carriers" in Wheels & Tracks issue 42, we learn that various Marks of Armoured Carrier, Wheeled, Indian Pattern were based on the following chassis:

C011QRF:
- Mark II: originally with GM banjo-type axles and 9.00-16 tyres
- Mark IIA: when quantity production got underway Ford split type axles and 10.50-16 tyres were installed
- Mark IIB

C191QRF: wider axles (78") with 6" front steering ends, 15" diameter brake drums and brake booster, heavier springs, hydraulic clutch actuation, 10.50-20 RF tyres
- Mark IIC

Note: the Armoured Carrier, Wheeled, NZ Pattern was fitted on the C191QRF chassis as well

C291QR: rearranged driver’s position with centrally mounted near-vertical driver’s position
- Mark IV

Click image for larger version

Name:	ND-124.jpg
Views:	16
Size:	47.2 KB
ID:	70059 Click image for larger version

Name:	ND-125.jpg
Views:	18
Size:	46.2 KB
ID:	70060 Click image for larger version

Name:	ND-128.jpg
Views:	18
Size:	45.7 KB
ID:	70063
Click image for larger version

Name:	ND-126.jpg
Views:	19
Size:	50.9 KB
ID:	70061 Click image for larger version

Name:	ND-127.jpg
Views:	12
Size:	45.1 KB
ID:	70062

Legend:
C - Canadian design;
0 - 1940 model year; 1 – 1941 model year; 2 – 1942 model year
1 - engine type; intention was to fit all Canadian Ford Special Pattern MV’s with the 85-bhp engine, hence the “1”. The 95-bhp engine was finally standardized but he “1” stuck until the models were changed for 1941 and the figure became “9” as it should have been.
1 - wheelbase (101");
Q - four-wheel drive;
R - rear mounted engine;
F – right hand drive.
Reply With Quote
  #7  
Old 23-12-14, 11:54
Hanno Spoelstra's Avatar
Hanno Spoelstra Hanno Spoelstra is offline
MLU Administrator
 
Join Date: Feb 2003
Location: The Netherlands
Posts: 14,401
Default

Quote:
Originally Posted by Lynn Eades View Post
The 1941 C19QHF was134 1/4wb. Modified from CO1QF 3 ton Chassis. This had 4 full sized fuel tanks.
Lynn,

Indeed, see pictures of the C19QHF below. Do you know for what type of vehicle this chassis was used or intended?

Hanno


Click image for larger version

Name:	ND-103.jpg
Views:	13
Size:	43.7 KB
ID:	70064 Click image for larger version

Name:	ND-104.jpg
Views:	13
Size:	37.1 KB
ID:	70065 Click image for larger version

Name:	ND-105.jpg
Views:	10
Size:	38.4 KB
ID:	70066 Click image for larger version

Name:	ND-107.jpg
Views:	16
Size:	38.1 KB
ID:	70067
Reply With Quote
  #8  
Old 23-12-14, 11:54
Hanno Spoelstra's Avatar
Hanno Spoelstra Hanno Spoelstra is offline
MLU Administrator
 
Join Date: Feb 2003
Location: The Netherlands
Posts: 14,401
Default

Quote:
Originally Posted by Lynn Eades View Post
Hanno, there were 3 designs, with the latest having a near vertical (short) steering column. The driver sat between the chassis rails (the floor fixed to the underside of the chassis???) and the master cylinders being above the hanging clutch and brake pedals. (hydraulic throttle as well)Low silhouette was "in", in 1943. The C291QH was 42-43 101 1/4wb.(third design) (modified FAT Chassis) Only two fuel tanks.
The 1941 C19QHF was134 1/4wb. Modified from CO1QF 3 ton Chassis. This had 4 full sized fuel tanks.
The 2nd design (1941-42) C191QRF was also 101 1/4 wb. 2 tanks.
1st design had 16" wheels the 2nd and 3rd designs had 20" wheels.
"H" is for Hanno!!!
I hope that helps a little.
Lynn,

It’s certainly helps. I can place the C191QRF and C19QHF chassis – see above.

But where does your reference to C291QH come from? Or were you referring to the C291QR chassis, which was the third design for the wheeled carrier.

If you have a reference C291QH does it support - or reject - the evidence presented here that the C291QH was intended to be used as the chassis for an armoured vehicle?

Thanks,
Hanno
Reply With Quote
  #9  
Old 23-12-14, 15:54
Lauren Child Lauren Child is offline
Registered User
 
Join Date: Sep 2011
Location: Cambridgeshire, UK
Posts: 281
Default

This might help - a hand written note in one copy of the Indian training manual.
Click image for larger version

Name:	image.jpg
Views:	40
Size:	53.2 KB
ID:	70074

Also, this page
Click image for larger version

Name:	image.jpg
Views:	53
Size:	79.8 KB
ID:	70075

Last edited by Hanno Spoelstra; 23-12-14 at 21:15. Reason: formatting
Reply With Quote
  #10  
Old 23-12-14, 21:27
Hanno Spoelstra's Avatar
Hanno Spoelstra Hanno Spoelstra is offline
MLU Administrator
 
Join Date: Feb 2003
Location: The Netherlands
Posts: 14,401
Default

Thank you Lauren! I take it these are the pages you referred to in Driver handbook scans and photocopies?

Quote:
Originally Posted by Lauren Child View Post
This might help - a hand written note in one copy of the Indian training manual.
In the top right hand section I think I read "stripped chassis"? But what is written exactly after the "H" (on the left below the entry for "W")?!?

Note: the "W" for 15-cwt is interesting.

Quote:
Also, this page
The subject C291QH chassis is listed as a 1942 "stripped C011QF chassis", i.e. stripped FAT chassis of which at least the winch was stripped (see "-" in column "Winch").

Great stuff!
Reply With Quote
  #11  
Old 23-12-14, 23:02
Lauren Child Lauren Child is offline
Registered User
 
Join Date: Sep 2011
Location: Cambridgeshire, UK
Posts: 281
Default

Quote:
Originally Posted by Hanno Spoelstra View Post
Thank you Lauren! I take it these are the pages you referred to in Driver handbook scans and photocopies?


In the top right hand section I think I read "stripped chassis"? But what is written exactly after the "H" (on the left below the entry for "W")?!?

Note: the "W" for 15-cwt is interesting.


The subject C291QH chassis is listed as a 1942 "stripped C011QF chassis", i.e. stripped FAT chassis of which at least the winch was stripped (see "-" in column "Winch").

Great stuff!
It is indeed!

The writing for the H on the right is really difficult to make out, so here is a closeup in the hopes that somebody on here can work it out. As it says Stripped on the typewritten page that may be it. On the left side it says "also 160".
Attached Thumbnails
image.jpg  

Last edited by Lauren Child; 23-12-14 at 23:45.
Reply With Quote
  #12  
Old 30-04-15, 21:24
Hanno Spoelstra's Avatar
Hanno Spoelstra Hanno Spoelstra is offline
MLU Administrator
 
Join Date: Feb 2003
Location: The Netherlands
Posts: 14,401
Default "H" stands for Hanno ;-)

Back to this question:
Quote:
Originally Posted by Hanno Spoelstra View Post
Of course questions remain:
1) What did "H" stand for exactly?
The latest clue came from Lauren:
Quote:
Originally Posted by Lauren Child View Post
The writing for the H on the right is really difficult to make out, so here is a closeup in the hopes that somebody on here can work it out. As it says Stripped on the typewritten page that may be it. On the left side it says "also 160".
Indeed it seems "H" has written ?"stripped chassis"? behind it.
Click image for larger version

Name:	CMP H.jpg
Views:	3
Size:	48.1 KB
ID:	73085

I found another staff car manual, stating "H" stands for "endroit de fabrication - siège social". That translates literally into "place of manufacture - head office". Would this mean the C291QH chassis was manufactured at Ford Canada's Windsor plant, rather than at one of their overseas assembly plants?
Click image for larger version

Name:	FORD FORDOR 003.jpg
Views:	12
Size:	64.7 KB
ID:	73086

We'll have to keep searching....
Reply With Quote
  #13  
Old 26-02-17, 01:37
Lynn Eades Lynn Eades is offline
Bluebell
 
Join Date: May 2003
Location: Tauranga, New Zealand
Posts: 5,534
Default

Hanno, In reply to your post #8 of 2 1/2 years ago (sorry) that was a typo on my part.
The rear engined armoured car chassis (4x4,101 1/4"wb) was a C291QRF.
This from the second page in of the Ford special pattern vehicle book, 3rd edition.
__________________
Bluebell

Carrier Armoured O.P. No1 Mk3 W. T84991
Carrier Bren No2.Mk.I. NewZealand Railways. NZR.6.
Dodge WC55. 37mm Gun Motor Carriage M6
Jeep Mb #135668
So many questions....
Reply With Quote
  #14  
Old 26-03-17, 20:25
Hanno Spoelstra's Avatar
Hanno Spoelstra Hanno Spoelstra is offline
MLU Administrator
 
Join Date: Feb 2003
Location: The Netherlands
Posts: 14,401
Default

Quote:
Originally Posted by Lynn Eades View Post
Quote:
Originally Posted by Hanno Spoelstra View Post
It’s certainly helps. I can place the C191QRF and C19QHF chassis – see above.
But where does your reference to C291QH come from? Or were you referring to the C291QR chassis, which was the third design for the wheeled carrier.
If you have a reference C291QH does it support - or reject - the evidence presented here that the C291QH was intended to be used as the chassis for an armoured vehicle?
Hanno, In reply to your post #8 of 2 1/2 years ago (sorry) that was a typo on my part.
The rear engined armoured car chassis (4x4,101 1/4"wb) was a C291QRF.
This from the second page in of the Ford special pattern vehicle book, 3rd edition.
Lynn, thanks for clearing that up!
Reply With Quote
  #15  
Old 08-05-18, 17:55
Hanno Spoelstra's Avatar
Hanno Spoelstra Hanno Spoelstra is offline
MLU Administrator
 
Join Date: Feb 2003
Location: The Netherlands
Posts: 14,401
Default

Quote:
Originally Posted by Hanno Spoelstra View Post
the C291QH is listed in an Instruction Book for Armoured General Purpose Vehicles together with it's sister chassis C291QR. As the latter was used for the Indian Pattern Wheeled Armoured Carrier, I think it is logical to deduce the latter chassis was used for the Indian Pattern 4x4 Armoured Truck - see the scan from Bart Vanderveen's book Historic Military Vehicle Directory:
Pierre-Olivier Buan posted pictures on FB of a survivor at the Defense Services Museum, Naypyidaw, Myanmar/Burma:

Name:  2A303A88-FAA5-4A0A-A73C-D96D6E43C4F3.jpeg
Views: 268
Size:  32.5 KB Name:  F6B47A45-EF24-447F-A237-2671830BDD37.jpeg
Views: 265
Size:  22.5 KB
Reply With Quote
  #16  
Old 07-02-21, 16:36
Hanno Spoelstra's Avatar
Hanno Spoelstra Hanno Spoelstra is offline
MLU Administrator
 
Join Date: Feb 2003
Location: The Netherlands
Posts: 14,401
Default Indian Pattern Armoured truck

Photo of an forward artillery position with an Indian Pattern Armoured truck. In service in Northwest India, 1945.

Courtesy of Aaron Smith.

Click image for larger version

Name:	146443650_782428899024314_2453554399690971588_n.jpg
Views:	4
Size:	71.6 KB
ID:	119875
Reply With Quote
  #17  
Old 21-02-21, 12:27
Hanno Spoelstra's Avatar
Hanno Spoelstra Hanno Spoelstra is offline
MLU Administrator
 
Join Date: Feb 2003
Location: The Netherlands
Posts: 14,401
Default

Look real close to see an Indian Pattern Amoured Car in the background of this photo taken in Burma, c.1949?

Click image for larger version

Name:	0c3c3c950896261c_large.jpg
Views:	3
Size:	424.1 KB
ID:	120189
Reply With Quote
  #18  
Old 22-03-21, 23:54
Hanno Spoelstra's Avatar
Hanno Spoelstra Hanno Spoelstra is offline
MLU Administrator
 
Join Date: Feb 2003
Location: The Netherlands
Posts: 14,401
Default Indian Pattern Armoured truck at Naypyidaw

Quote:
Originally Posted by Hanno Spoelstra View Post
Pierre-Olivier Buan posted pictures on FB of a survivor at the Defense Services Museum, Naypyidaw, Myanmar/Burma:
Aaron Smith sent a better picture of the surviving Indian Pattern Armoured truck in the open air museum exhibit area in Myanmar/Burma. Note the added turret.

Click image for larger version

Name:	160007754_277076510457628_8516224574716959340_n.jpg
Views:	4
Size:	81.7 KB
ID:	121020


I did a little more digging on facebook and found another photo. They have an Indian Pattern Wheeled Carrier, too.

Click image for larger version

Name:	161319251_10157510725857504_961284551862327138_n.jpg
Views:	5
Size:	76.9 KB
ID:	121021

Source: "Naypyidaw is the new capital of Myanmar which is around 5 hours ride from Yangon, the country's old capital."
https://www.facebook.com/media/set/?...0542504&type=3
Reply With Quote
  #19  
Old 23-03-21, 02:50
Tony Smith's Avatar
Tony Smith Tony Smith is offline
No1, Mk 2** (I'm back!)
 
Join Date: Feb 2003
Location: Lithgow, NSW, Australia
Posts: 5,042
Default

Interesting hub centres on front and rear axles, quite unlike any other CMP hub.
__________________
You can help Keep Mapleleafup Up! See Here how you can help, and why you should!
Reply With Quote
  #20  
Old 23-03-21, 08:54
Hanno Spoelstra's Avatar
Hanno Spoelstra Hanno Spoelstra is offline
MLU Administrator
 
Join Date: Feb 2003
Location: The Netherlands
Posts: 14,401
Default

Quote:
Originally Posted by Tony Smith View Post
Interesting hub centres on front and rear axles, quite unlike any other CMP hub.
Indeed. Look at their IP Wheeled Carrier, that one looks like it has strange hubs and wheels too.

Could they have had some sort of “midlife update”?

Click image for larger version

Name:	6706D85A-1E53-489D-A5B0-CAAD3DD92B7D.jpeg
Views:	3
Size:	81.5 KB
ID:	121037
Source: http://www.mapleleafup.net/forums/sh...738#post277738
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Indian Pattern LAAT Hanno Spoelstra The Softskin Forum 2 07-01-10 23:09
WANTED: Royal Engineers' Lancaster Rfile (1850s) for museum Colin Macgregor Stevens The MLU Sappers Mess 0 14-12-09 05:06
176 Coy, Royal Engineers history Jordan Baker WW2 Military History & Equipment 2 13-11-08 03:13
14th Field Survey Squadron Royal Engineers Crewman WW2 Military History & Equipment 0 24-05-05 15:43


All times are GMT +2. The time now is 16:51.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © Maple Leaf Up, 2003-2016