|
|
#1
07-02-13, 17:58
|
|||
|
|||
Aust Track Adjusting Spanner
Just shows we all learn something new every day.......
I had a query from a restorer that his Aust track adjusting spanner didn't fit the holders in the rear of the Aust carrier (back plate). Why? Hell, I didn't know! Well, to make a long story short, the dimensions were changed making the distance from the spanner head to the right angle bend longer. Hence, a long spanner won't fit a 'short' holding box/bracket. This probably applies to side-mounted tool sets as well, as these are early mounting brackets. The Workshop Manual (large format) holds the solution: it details a mod to the bracket to take the long spanner. So if any of you with early numbered Aust carriers find the track spanner you have doesn't fit, refer to the Aust W/shop manual for the solution (or find an early 'short' spanner....). Mike C 
|
|
#2
11-02-13, 07:09
|
||||
|
||||
|
This is what Mike is referring too.
__________________
Euan McDonald 4? C-GT (Aust) #8 44 C-GT (Aust) #9 42 Jeep, Trailer Aust 3 Welbike MK2 complete Welbike MK2 inconplete under resto C15A x3 C60S x1 ex ambo F60L x3 LP2a carrier SAR #4993. Trailer No27 Limber Trailer, Cario cargo Trailer, Pontoon semi Wiles Cooker 2 wheeled (jnr) Last edited by Euan McDonald; 11-02-13 at 07:36.
|
 |
|
|
Linear Mode
