MLU FORUM  

Go Back   MLU FORUM > MILITARY VEHICLES > The Carrier Forum

Notices

Reply
 
Thread Tools Display Modes
  #1  
Old 02-11-08, 09:51
Rob Beale Rob Beale is offline
C8AX Ambulance (NZ), UC1*
 
Join Date: Aug 2006
Location: Gisborne, New Zealand
Posts: 388
Default Loyd Carrier cooling question.

Here's one for the team: A Loyd carrier has its engine facing to the rear, with the radiator rearmost.

What is the airflow direction through the radiator? Is it over the engine and out through the radiator?

Does this mean the fan blades have a reversed angle to the normal Ford V8.
If so does any other V8 have the same fan?

Rob
Reply With Quote
  #2  
Old 03-11-08, 11:42
Lynn Eades Lynn Eades is offline
Bluebell
 
Join Date: May 2003
Location: Tauranga, New Zealand
Posts: 5,534
Default Rob

I dont know the answer, but my guess is that the fan still sucks the air through the rad, The fan will be more efficient that way. and your forward speed will have little effect on the flow of the air inside the engine cover.
Now I'm waiting to find out too.
__________________
Bluebell

Carrier Armoured O.P. No1 Mk3 W. T84991
Carrier Bren No2.Mk.I. NewZealand Railways. NZR.6.
Dodge WC55. 37mm Gun Motor Carriage M6
Jeep Mb #135668
So many questions....
Reply With Quote
  #3  
Old 03-11-08, 19:00
Stefan Leegwater's Avatar
Stefan Leegwater Stefan Leegwater is offline
Registered User
 
Join Date: Sep 2004
Location: Netherlands
Posts: 179
Default

Hi Rob,

As we own and restored a Loyd carrier we found out that the airflow goes from the engine through the rad at the back.
If you install an ordinary fan with the airflow from the rad to the engine, you'll get some serious headaches from all the fumes and crap from the engine inwards the carrier, very nice if you have the tarp on (NOT).

Good luck finding the correct fan,

Cheers,

Stefan
Reply With Quote
  #4  
Old 03-11-08, 19:51
Rob Beale Rob Beale is offline
C8AX Ambulance (NZ), UC1*
 
Join Date: Aug 2006
Location: Gisborne, New Zealand
Posts: 388
Default So it is as I suspected:

Thanks Stefan,
that makes sense, as the dust cloud behind would be drawn back inside the vehicle.

I had the opportunity to drive a Loyd on the weekend, and there was a long running discussion on the airflow direction. A fan with the opposite angled blades has been found (ex tractor) but it will need an adaptor made to fit.

It is about 1 inch smaller in overall diameter, but I think the rearward airflow will overcome any loss of efficiency at the fan tips.

Lynn,
the engine cowling is completely open at the front, with a wide spaced mesh. Possibly the wheeled Carrier has the same set up too.

Rob
Reply With Quote
  #5  
Old 03-11-08, 23:56
Tony Smith's Avatar
Tony Smith Tony Smith is offline
No1, Mk 2** (I'm back!)
 
Join Date: Feb 2003
Location: Lithgow, NSW, Australia
Posts: 5,042
Default

Quote:
Originally posted by Rob BealePossibly the wheeled Carrier has the same set up too.
The Ford Rear-Engined chassis used in the Wheeled Carrier has a normal rotation fan that draws air FORWARD through the radiator. The Wheel Carrier bodywork has a upward facing vent to draw air down into the radiator, and an open bottom to the engine compartment to vent hot air away. Although there is an access panel between the crew compartment and the engine compartment, there is no through ventilation.

As far as I can see on pics of the GM rear engined chassis (Fox, Otter, Rhino), the fan also appears to be a normal rotation fan that draws air forward through the rad.
Attached Thumbnails
K04-108.JPG  
Attached Images
 
__________________
You can help Keep Mapleleafup Up! See Here how you can help, and why you should!
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +2. The time now is 22:40.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © Maple Leaf Up, 2003-2016