Sold: Carrier vision shutter screens

[Marc van Aalderen]

Hi,

For sale on behalf of Hans Bekkers.

Hans had some very nice screens produced for his Mk1 Carrier and has an extra set of three for sale. These have been professionally made and the glass is hardened. For the set of 3 cost is € 150.



Regards,

[Andrew Rowe]

PM sent, Thanks

[colin jones]

Hi Mark, I noticed that they are all the same as in the hole centres. The Australian and N.Z. ones have 2 left hand and 1 right hand. Are all yours the same.
Colin.

[RichardT10829]

Canadian are the same they are handed so to speak

[Lynn Eades]

The Australian ones are also made for a thicker glass. The riveted carriers were made to take a 4.5mm laminated glass. (hard to get)
The Australian one is located by the flat underside of a 5/16" or 3/8" (cant remember which) bolt, while the riveted one is located under the taper of a countersunk screw.

[Marc van Aalderen]

Hi,

We know the three in the picture are not a correct set but I had no other picture on my laptop. Supplied set will be correct for a Canadian Carrier.

There are several people interested. I will see if I can get Hans to make some more sets.

Cheers,

[Dirk Leegwater (RIP)]

Originally Posted by Marc van Aalderen

For sale on behalf of Hans Bekkers.

Hans had some very nice screens produced for his Mk1 Carrier and has an extra set of three for sale. These have been professionally made and the glass is hardened.
For the set of 3 cost is € 150.

Beste Marc, it's a littlebit dangerous, to help a customer making a special repro of a very rear example part from our LwD shop. For us no more rent.

We say in Holland: Dat is pronken met andermans veren !

Dirk

[Marc van Aalderen]

Originally Posted by Dirk Leegwater

Beste Marc, it's a littlebit dangerous, to help a customer making a special repro of a very rear example part from our LwD shop. For us no more rent.

We say in Holland: Dat is pronken met andermans veren !

Dirk

Hi Dirk,

As I said: For sale on behalf of Hans Bekkers. As he doesn't know much about computers he asked me to put it on the Forum. I have no idea where he got the original one from, he did not tell me. If you have a problem with these repros please talk to Hans. Like they say in the UK: You are barking up the wrong tree.

Cheers,

[Stew Robertson]

I can do them for the same price in Canada with the glass

[Marc van Aalderen]

Hi Stew,

These also have the glass, hardened too. Laminated in that thickness is impossible to get here in the Netherlands.

Cheers,

[Marc van Aalderen]

BTW, they have been sold to the first interested party and there will not be any more. Sorry to the other interested parties.

Cheers,