HUP radiator

[James Gosling]

Hi, can anyone help with pictures of the radiator and shroud in an HUP please?

Thanks in advance!

James

[Phil Waterman]

Hi James

What in particular are you trying to see? There are lots of photos on my web page particularly concerning the restoration of my HUP http://canadianmilitarypattern.com/H...leContents.htm may take a while to wade through all of it. But I know I have various shots.

Or if you can explain a little bit more on what you need in particular I'll try and find picture.

Cheers Phil

[James Gosling]

Hi Phil,

My problem is I'm not sure if I have the correct radiator in the old girl, all my other vehicles have the 270 engine and a different radiator to the 216.

I will check your website again, I'm sure it will give me the answers I need!!

[Phil Waterman]

Hi James

When I was overhauling my HUP a couple years ago I took a bunch of photos of the radiator just for the purpose of identification and measurement just in case I needed to find a new radiator or have a new one made.

They are on my main computer so I will look for them later today, or tomorrow while it is raining.

Are you going to keep using the 270 engine? I understand that the 270 is longer than the 216 or 235/261 engines. If you have photos of how the radiator you have was mounted and side views of the radiator and the water pump and fan on the 270 those might be of use to people considering using a 270 in a CMP.

Cheers Phil

[Phil Waterman]

Hi James

Here are a few more photos, I have about 50 more but their size makes it hard to post to MLU.








Cheers Phil

[James Gosling]

Hi Phil,

Thanks for the pictures. Sorry if I caused confusion, my HUP has a 216 engine but not sure if the rad is correct, as all my other vehicles have 270 engines I have nothing to compare it too.

Thanks again
James