MLU FORUM

MLU FORUM (http://www.mapleleafup.net/forums/index.php)
-   The Carrier Forum (http://www.mapleleafup.net/forums/forumdisplay.php?f=6)
-   -   correct measurements of rear mk1 armour plate (http://www.mapleleafup.net/forums/showthread.php?t=15765)

martyn 27-11-10 15:05

Hi lynn
the holes were in the same places but were not rivetted in it had a bren AA mount bracke still attached on one side or what was left of it and i think it had a mk2 box on the back at some point also there were a few footman loops attached at one end. and the side armour had the deep water base plate welded over the holes for the mk1 angle that held the gun rests. also there was signs of a tube being welded to the top edge.

Lynn Eades 27-11-10 20:54

Martyn
 
So it was a MkI Universal that had been converted to a MkII. Not a Mortar carrier.

Marc van Aalderen 28-11-10 16:05

Speedo drive?
 
Quote:

Originally Posted by shaun (Post 139104)
Martyn any sign of my speedo drive ?

Shaun, Martyn,

Are you talking about the speedo drive that goes in the rear axle? I still need the gear CTL2216 and housing CTL 2510 B2 to screw in the axle. If you are having these reproduced I would like a set. Richard is kind enough to loan me his but if you are allready making them that would be easier. Please let me know.

Thanks,

RichardT10829 28-11-10 17:39

Marc i think this is a case of bits traded and swapped rather than repro bits buddy. if you take a drwing of the item to a machinist and get a quote like i say i am happy to ship mine over to you, but i would need it back.

shaun 28-11-10 19:16

Hi Marc,
Just trying to get some parts back. enough said.

Marc van Aalderen 29-11-10 20:57

Richard,
 
Quote:

Originally Posted by RichardT10829 (Post 139256)
Marc i think this is a case of bits traded and swapped rather than repro bits buddy. if you take a drwing of the item to a machinist and get a quote like i say i am happy to ship mine over to you, but i would need it back.

I think that will have to be the way to go. Nobody replied on my "wanted" add in the for sale section. I will PM you. Thanks again for your kind offer. :thup2:

Cheers,
Marc

RichardT10829 29-11-10 21:17

no problems matey i will get the drive out of the garage when i go in for the piccys of my fuel tanks for Jordan. it wont be until wednesday / thursday this week though.

so its the drive gear and brass adaptor which go into the diff housing ?

Marc van Aalderen 29-11-10 21:26

Richard,
 
Quote:

Originally Posted by RichardT10829 (Post 139317)
so its the drive gear and brass adaptor which go into the diff housing ?

Yes, please! Thanks,mate! I have sent you a PM.

If there are other members missing these parts I will get more made. Anybody?

Cheers,
Marc

RichardT10829 30-11-10 10:55

Yes PM sent. i would be inclined to get a price for a run of them it sometimes works out cheaper rather than rig a machine to do one... its certainly something we will all need at some point buddy.


All times are GMT +2. The time now is 00:10.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © Maple Leaf Up, 2003-2016