MLU FORUM

MLU FORUM (http://www.mapleleafup.net/forums/index.php)
-   The Softskin Forum (http://www.mapleleafup.net/forums/forumdisplay.php?f=5)
-   -   CMP Reflectors/Tool Stowage (http://www.mapleleafup.net/forums/showthread.php?t=13846)

david moore 27-11-09 01:53

CMP Reflectors/Tool Stowage
 
Were CMP's originally fitted with rear reflectors? I've never seen any in photos but I'd like to put a pair on for safety's sake

What about shovel/axe etc. Were CMP's fitted out with these. If so, where stowed (especially on/in a 1B1 box)?

david moore 14-12-09 23:38

Picture of tool stowage
 
1 Attachment(s)
Terry Creighton in NZ has sent me lovely factory pictures of the F8 long box showing where the pioneer tools were stowed - see attached pic - hope it comes out clearly after scanning. Note the sheet metal on the LHS attached to the tilt hoops. Clip for axe and shovel - and holders for two Lee-Enfields. The extra piece of sheet metal in the roof holds the rifle for the third rear crew member - three seats provided.

I also can just see a rear view mirror inside the cab. Also note that there is only one rear light each side (one brake, one running?) but a double lamp holder each side?

Thanks Terry

I'll put the side view on the next post.

david moore 14-12-09 23:41

F8 side view
 
1 Attachment(s)
Here's the side view of the long box F8


All times are GMT +2. The time now is 18:31.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © Maple Leaf Up, 2003-2016