|
|
#1
27-11-09, 01:53
|
|||
|
|||
CMP Reflectors/Tool Stowage
Were CMP's originally fitted with rear reflectors? I've never seen any in photos but I'd like to put a pair on for safety's sake
What about shovel/axe etc. Were CMP's fitted out with these. If so, where stowed (especially on/in a 1B1 box)? 
|
|
#2
14-12-09, 23:38
|
|||
|
|||
|
Picture of tool stowage
Terry Creighton in NZ has sent me lovely factory pictures of the F8 long box showing where the pioneer tools were stowed - see attached pic - hope it comes out clearly after scanning. Note the sheet metal on the LHS attached to the tilt hoops. Clip for axe and shovel - and holders for two Lee-Enfields. The extra piece of sheet metal in the roof holds the rifle for the third rear crew member - three seats provided.
I also can just see a rear view mirror inside the cab. Also note that there is only one rear light each side (one brake, one running?) but a double lamp holder each side? Thanks Terry I'll put the side view on the next post.
|
|
#3
14-12-09, 23:41
|
|||
|
|||
|
F8 side view
Here's the side view of the long box F8
|
 |
|
|
Linear Mode
