Work Station ID Required
 

G'day All,

Recently, I saved a piece of equipment from the scrap bin as I knew it was something interesting , but had no real idea of what it was.

So, I submit it to you all for close scrutiny in the hope that its former use can be ascertained.

It appears to be a steel-framed work station that is beautifully made. It has gussets all over for reinforcing and weighs around 40-50 kg. It has had a number of coats of khaki paint (various shades) over the years that are now peeling. It has lugs on all four feet for bolting to a floor. There are lots of storage holes and containers, and also a clipboard top bolted to the RHS. The general dimensions are:- (h) 1110 mm, (w) 640 mm, (l) 860 mm.

See Images attached - I hope they work!

I thought it may be something from inside a Radio Van or some such.

Please let me know your thoughts.

Jared

DMV book photo of Office Body
 

Hi Jared,
I scanned a pic out of the DMV book that I have showing the rear of the Office Body, on the right side of the tray/body there are similar tables or work stations like the one you have pictured, does anybody else know of this and/or are they the same items?