|
|
#1
29-01-10, 07:09
|
|||
|
|||
Work Station ID Required
G'day All,
Recently, I saved a piece of equipment from the scrap bin as I knew it was something interesting , but had no real idea of what it was. So, I submit it to you all for close scrutiny in the hope that its former use can be ascertained. It appears to be a steel-framed work station that is beautifully made. It has gussets all over for reinforcing and weighs around 40-50 kg. It has had a number of coats of khaki paint (various shades) over the years that are now peeling. It has lugs on all four feet for bolting to a floor. There are lots of storage holes and containers, and also a clipboard top bolted to the RHS. The general dimensions are:- (h) 1110 mm, (w) 640 mm, (l) 860 mm. See Images attached - I hope they work! I thought it may be something from inside a Radio Van or some such. Please let me know your thoughts. Jared 
|
|
#2
31-01-10, 11:05
|
|||
|
|||
|
DMV book photo of Office Body
Hi Jared,
I scanned a pic out of the DMV book that I have showing the rear of the Office Body, on the right side of the tray/body there are similar tables or work stations like the one you have pictured, does anybody else know of this and/or are they the same items?
|
 |
|
|
Linear Mode
