MLU FORUM

MLU FORUM (http://www.mapleleafup.net/forums/index.php)
-   The Softskin Forum (http://www.mapleleafup.net/forums/forumdisplay.php?f=5)
-   -   I D required (http://www.mapleleafup.net/forums/showthread.php?t=18119)

Bob McNeill 19-03-12 07:08

I D required
 
5 Attachment(s)
At a local clearing sale I picked up 2 transfer cases. One very different from normal 4 x 4 as drive went straight thru and the Hi / Lo shift rod doesn,t protrude thru the case and the case has fewer ribs.

Lynn Eades 19-03-12 07:29

Bob
 
Isn't it from a C8? (or F8) being single speed,with no park brake assy. at the output.

Bob McNeill 20-03-12 12:26

Id
 
Totally different to a C15a as it has shift rod which moves top gear rear ward to lock into output shaft.

Alex van de Wetering 21-03-12 00:11

C60X maybe?

Bob Carriere 21-03-12 03:18

2 speed.....?
 
First picture...centre bottom.... looks like the first part to a PTO......spline shaft showing..


3rd picture shows the front of the T case where the speedo cable connects....strange that on the right side is the input shaft yoke from the engine...... but the yoke to what should be the front axle has no typical front axle disconnect...... armored full time 4x4..???

...and the last picture seems to show the rear of the T case which is the E brake drum and the attachment for the E brake.....

That seems like a 2 speed with e brake attachment.

Bob

lynx42 21-03-12 06:50

1 Attachment(s)
Bob,
Maybe White Scout Car in pic.5. Here is the scan from the parts book for comparison.

Have to go and have a better look at mine.

Regards Rick.

Bob McNeill 21-03-12 09:52

I d
 
Rick I think you are on the money, its the same setup as the pic. Trust MLU to come up with the answer. Thanks.


All times are GMT +2. The time now is 15:04.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © Maple Leaf Up, 2003-2016