Kevin. I think you will find these old fords used a special profile belt (as Richard has aluded to) I have an original belt here, Autolite 7RA 8620C the belt width is 17mm wide, but the depth is 13mm (a B section is 11mm)
I think this will mean the angles of the side of the belts are different.
To do it right, you might have to go to the trouble of getting belts from a Ford dealer (e.g. Vanpelts in the U.S)
__________________
Bluebell
Carrier Armoured O.P. No1 Mk3 W. T84991
Carrier Bren No2.Mk.I. NewZealand Railways. NZR.6.
Dodge WC55. 37mm Gun Motor Carriage M6
Jeep Mb #135668
So many questions....
|