Quote:
Originally Posted by Tony Smith
Those bearings are probably available right here in town! P/No BB7025 is a 6209 bearing while BB7065 is a 6307. Take your old bearings in to a bearing supply place so they can match the particular features of seal and circlip groove location. The bearings I used were 6209LLUC and 6307ZU1, but I think I then had to pry a rubber seal out of one side(??).
Throw out bearing is BCA 2065 (again, should be available locally or from various sources online), while the clutch shaft bushes should be available generically but I don't hve a part number. I bought mine from this seller on e-bay. |
Well done! Do those bearings have the retaining groove and clip around the outside?
Seeing as you've now got such a good relationship with your local bearing shop, when the clutch release shaft bushes arrive from Century, before you fit them, take them into the bearing shop and see if they can assign a current part number for them. I realise US$10pr is pretty fairly priced, but you never know if it can be beat. Having a brand and number would be a good start. I had a set many years ago that I think were either Federal Mogul or TRW, but I've long forgotten the number.