![]() |
#1
|
|||
|
|||
![]()
Hi
Does anyone have an original spec crow bar that straps to the bottom of the tool plate? If so would you mind measuring the diameter for me please? Thanks Ben |
#2
|
||||
|
||||
![]()
Hi Ben, I did write you an email back about this and the 7/16" lifting eye screws but my computer locked up and it wasnt sent, the crowbar length is in the manual, diameter wise it needs to fit in the retaining strap holder, I will check tomorrow on the one I have but its a shortened vintage one with a point reground, will check the counter sunk bolt length tomorrow and post it up if no one beats me to it.
kev.
__________________
2pdr Tank Hunter Universal Carrier 1942 registered 11/11/2008. 3" Mortar Universal Carrier 1943 registered 06/06/2009. 1941 Standard Mk1 stowage Carrier, Caunter camo. 1941 Standard Mk1 stowage Carrier, light stone. 10 cwt wartime mortar trailer. 1943 Mk2 Daimler Dingo. 1943 Willys MB. 1936 Vickers MG carrier No1 Mk1 CMM 985. |
#3
|
|||
|
|||
![]()
Thanks Kevin,
It's the diameter I'm after to help out make the bracket for the Bren. Cheers Ben |
#4
|
|||
|
|||
![]()
Ben,
Made my bar out of 1 1/4" round bar. Doug |
#5
|
||||
|
||||
![]()
Ben, i have both ends for the crow bar... the bracket that goes under the step and the spade head end... i can send them down if you wanted to copy them... they are repro but goodun's
__________________
is mos redintegro __5th Div___46th Div__ 1942 Ford Universal Carrier No.3 MkI* Lower Hull No. 10131 War Department CT54508 (SOLD) 1944 Ford Universal Carrier MkII* (under restoration). 1944 Morris C8 radio body (under restoration). |
#6
|
||||
|
||||
![]()
Ben, 1" CROWBAR, 7/16 Slotted lifting eye bolts 1 1/2" shank length, measured from nos originals.
kev.
__________________
2pdr Tank Hunter Universal Carrier 1942 registered 11/11/2008. 3" Mortar Universal Carrier 1943 registered 06/06/2009. 1941 Standard Mk1 stowage Carrier, Caunter camo. 1941 Standard Mk1 stowage Carrier, light stone. 10 cwt wartime mortar trailer. 1943 Mk2 Daimler Dingo. 1943 Willys MB. 1936 Vickers MG carrier No1 Mk1 CMM 985. |
#7
|
|||
|
|||
![]()
Thank you all. The Bren bracket is a little different from the UC type as there is no step on the RHS. The diameter lets me work out the size of the bottom fitting.
Thanks Ben |
![]() |
|
|