|
|
#11
09-09-12, 10:37
|
||||
|
||||
The little things count too
Fuel filter painted.jpg Horn finished 1.jpg
Still working on some of the 'small' stuff. Fuel filter now painted (visually complete only, rusted to buggery inside). The horn is finished and ready to go on. Distributor 1.jpg Distributor assembled 1.jpg My distributor was incomplete, but thanks to the parts bought yesterday, it is now all cleaned, assembled, and can be sent for mechanical rebuild by a professional. Steering wheel before.jpg Nearing knock-off time, I turned attention to removing the steering wheel that is on my other truck. I had been dreading this and quickly found I didn't have the correct size tube spanner or socket to do the job. So I got the nut off with a cold-chisel. It was stuffed anyway, but the two halves can still be used to source another in town. The wheel came loose with a little encouragement from a few dead blows. I have long wanted to get at the steering wheel, to see if it could be salvaged. The next posting shows what I discovered! 
__________________
Ford CMP, 115" WB,1942 (Under Restoration...still) Medium sized, half fake, artillery piece project. (The 1/4 Pounder) 
|
|
|
Threaded Mode