|
|
|
|
#1
14-12-11, 00:00
|
|||
|
|||
Track and T16 parts on milweb
Folks
Some track has appeared on milweb , as well as a T16 axle - Rick you may wants to have a look ! http://www.milweb.net/webverts/60144/
__________________
Shaun Hindle Morris C8 Ford GPW jeep 1945 Morris 1000 (ex mil) SAS LSV Harley Davidson MT 350 motor cycle Universal carrier MK 1*1943 Ronson (under restoration) Universal carrier MK 2* 1944 (Puddle Jumper HSK 345) Ferret MK 1/1 1956 Ferret MK 2/4 1958 CVR(T) Scorpion 432 MK2 Daimler MK1 armoured car 1943 (winner best wheeled armour W&P show 2011) Daimler Dingo MK2 1944 (awaiting restoration, aquired 11/12/2011) Fordson WOT 3 D 1940 (awaiting restoration ) 
|
|
#2
14-12-11, 10:13
|
|||
|
|||
|
thanks shaun but the guys a little over the top on his price, although the track looks to be in great condition it would have to come with the bren gun carrier attatched for me to part with £8k. having said that, if there really is enough track for 3 carriers and you can batter him down to £6k then it stacks up.
if anyone needs track and is interested then maybe we could club together and get some, i only need about 200 links to get enough for my t16 so let me know if you're interested i also noticed he had the fabricated and not cast idler assemblies  .cheers rick
__________________
_______________________ 1941 mk1 mortar Carrier 1941 Mk1* Carrier 1942 Mk1* Carrier 1943 T16 Carrier 1945 Mk3 Dingo 1941 Mk3 Covenanter 1941 Mk4 Churchill AVRE (now sold) 1944 Mk6 Cromwell (now sold) 1952 Mk3 Centurion 1952 ARV Centurion 1952 ARV Centurion 1953 Mk3 Centurion (breaking)
|
|
#4
14-12-11, 12:53
|
||||
|
||||
|
I didnt think it was too bad the average for full track is 3k and if there is three full sets plus drive axle wheels etc ? still a lot of money but.....
__________________
is mos redintegro __5th Div___46th Div__ 1942 Ford Universal Carrier No.3 MkI* Lower Hull No. 10131 War Department CT54508 (SOLD) 1944 Ford Universal Carrier MkII* (under restoration). 1944 Morris C8 radio body (under restoration).
|
|
#5
14-12-11, 15:43
|
||||
|
||||
|
Does look expensive.
If you look, the made up chassis is much narrower than a UC so the T16 rear axle would only be good for the diff and brake bands. Also if you look at the distance from drive sprocket to idler there is either simple skids to guide the track or a series of small wheels, can't be normal UC road wheels, perhaps a series of rack return rollers. T16s are what...180ish tracks links per side. I read the advert as enough track for three assemblies, i.e one and a half carriers worth, but looking at the indoors and outside photos there looks to be at least enough for two carriers. NB: I think I was given the heads up about these tracks last year, there is a saw mill in Wiltshire who have a similar setup which they use to move timber into the building, with the openable fence panel wall etc... I was also told that the mill owner 'knew they were very valuable', possibly the same place.
__________________
Alastair Lincoln, UK. Under Restoration: 1944 No2 MK2 Loyd Carrier - Tracked Towing 1944 Ford WOT6 Lorry The Loyd on Facebook Last edited by ajmac; 14-12-11 at 16:10.
|
|
#6
14-12-11, 16:16
|
|||
|
|||
|
I've heard there are 2 wheels per side, it has to all be taken away inc chassis and the price is pretty firm. He's knows what they're worth and is happy to hold onto them until his price is met......it's in Yeovil. perhaps if a few folks grouped together and the price could come down a bit!!!!!
Ben
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
