|
|
|
|
#1
14-02-09, 16:15
|
||||
|
||||
Piece to identified!
Hi
I need info what is this parts?   Is all this lever ar suppose to be there    This braket is on the back of the roof look original ? what is it use for   This window any year particular? juste for chevy or for ford to  
__________________
Eric Thibodeau 1942 willys Jeep 
|
|
#2
14-02-09, 16:19
|
||||
|
||||
|
Here missing a braket
 
__________________
Eric Thibodeau 1942 willys Jeep
|
|
#3
14-02-09, 17:07
|
|||
|
|||
|
Bracket ID
Sir,
The 2 little brackets with puny sheet metal stampings are to hold the front of your seat frame to the floor. I know that a couple of 1/4" bolts seems like overkill, but that is what was used at the front. The seat slides into a much wider bracket for the rear of the seat, then those 2 small tabs hold the frame down to the floor. You are indeed missing a strap that connects the lower tubes of the seat frame. These must have been welded on the afternoon shift, beacuse mine fell of also. Or maybe just a fat guy leaned back too far - this also happened to my '03 Silverado  .Good luck. Stewart
|
|
#4
14-02-09, 18:11
|
|||
|
|||
|
Who was......
... the fat guy in the 03 Silverado.....?
That Ford gun tractor seems to have a access panel in the floor behind the seat.....?.... maybe the guys frome Petrolia would know..... Eric.... will send photo of the missing strap...... easy to make and weld back in place....... Bob
__________________
Bob Carriere....B.T.B C15a Cab 11 Hammond, Ontario Canada
|
|
#5
14-02-09, 18:14
|
||||
|
||||
|
Hi Bob,
That is not on a gun tractor but on the ford F15a i think is for a gaz can Call me i home 
__________________
Eric Thibodeau 1942 willys Jeep
|
|
#6
14-02-09, 20:30
|
|||
|
|||
|
On all the NZ based CMPs I've seen,
Those little brackets hold down the back of the seat frame which extends about one inch each side, and the wider bracket holds the front edge of the seat base, out of sight under the seat itself.
Could the window frame be from a HUP rear door? Does the floor bracket behind the seat have a raised edge? Hard to see clearly in the image. I usually stow stuff behind the seat, but things can roll or slide while driving, so a shallow box would be a useful modification. My C8AX has a raised angle frame fitted on top of the doghouse. Very useful to hold small bits and pieces on trips. Rob
|
|
#7
22-02-09, 12:17
|
||||
|
||||
|
Hi Bob,
What is the springs dimension and how long is it and what is the size of the ring   
__________________
Eric Thibodeau 1942 willys Jeep
|
|
#8
29-04-09, 20:41
|
||||
|
||||
|
Hi,
Anyone know if this braket is original??? and what is it??  thx Eric
__________________
Eric Thibodeau 1942 willys Jeep
|
|
#9
29-04-09, 21:20
|
||||
|
||||
|
Round Hatch
Quote:
__________________
RHC Why is it that when you have the $$, you don't have the time, and when you have the time you don't have the $$?
|
|
#10
29-04-09, 21:32
|
||||
|
||||
|
Quote:
Yes it have a round hatch  could you explaine or have a pic for the cover retention systeme
__________________
Eric Thibodeau 1942 willys Jeep
|
|
#11
29-04-09, 22:31
|
||||
|
||||
|
Calling Phil Waterman
Quote:
__________________
RHC Why is it that when you have the $$, you don't have the time, and when you have the time you don't have the $$?
|
 |
|
|
Hybrid Mode
