Oil Cooler elbows

[Jordan Baker]

Hi all.

Just looking for some pictures on the Oil Cooler Elbows (CTL5138) and the lock nuts (C01UC 100260) and how they fit into the "C" channel along the hull floor.

Im working on getting the final parts made up for my oil cooler setup. I found the bits/pieces on the Vintagecarparts website.

http://www.vintagecarparts.co.uk/en/1707~elbow-details/
http://www.vintagecarparts.co.uk/en/...ipple-details/

Im just wondering how close their 1/2" elbow is to the original?

Any help would be much appreciated.

[Lynn Eades]

A picture of TL1538

[Jordan Baker]

Thanks. Im not sure if the modern ones would be long enough on the one end to fit.

Anyone have a spare set of the elbows they wish to part with?

[Jordan Baker]

So I ordered the modern ones from the above mentioned supplier. The threaded end wont be long enough to pass through the floor bracket and be able to hook up to the flex hose.

It should be 1/2" female to 1/2" male bspp. The male end needs to be longer so that the flex hoses can attach to them.

Ive tried to find some extentions but no luck. I think they would be called bulkhead adaptors. Just wondering if anyone can help me find some.

[Lynn Eades]

Is there a male -female elbow, that you can screw in some brass threaded pipe. Weld it in with easyflo, having already turned the tapered seat into the outer end of the pipe. (I know you'd rather buy the right ones)

[Jordan Baker]

Or.....you could sell me those ones