![]() |
|
#1
|
||||
|
||||
![]()
I have received the following in email and I'm wondering if any of you modeling chaps can help this fellow out. I'll pass him this URL so he can track it as he wishes (and copy this to the Sergeants' Mess).
Thanks, Jif Quote:
__________________
SUNRAY SENDS AND ENDS :remember :support |
#2
|
|||
|
|||
![]()
Resicast or S Model. But I believe there are dimensional issues with both.
The other option is Formations hull which is the later Ram without the MG turret. But you would need to scratch build the interior here. Formations is the best of the three. No connection with manufacturer. I would have posted a picture of mine but don't know how. Cheers Kevin |
#3
|
||||
|
||||
![]()
It looks like the Formations kits may be a better starting point because they are based on the late model Rams as the Kangaroos used by 1st CAPCR.
http://www.formationsmodels.com/1816135.html http://www.formationsmodels.com/1160734.html |
#4
|
||||
|
||||
![]() Quote:
__________________
SUNRAY SENDS AND ENDS :remember :support |
#5
|
|||
|
|||
![]()
The Verlinden set is probably the worst starting point (that's the one I used for the model for Hanno). It is 6mm too short and 2mm to narrow, turret ring way too small etc. etc.
The story is that S-model has copied (or partly copied) the Verlinden hull, so that one has problems too. There also used to be one from H&K or something. But, the story is that this one copied the flaws of the ones above. The Resicast Roo used to have some issues, but they are currently working on a fully new master. They are/were the only one to offer a Kangaroo with interior. The formations set is good indeed and they might just also do a Kangaroo. Alex |
#6
|
|||
|
|||
![]()
I hope this works.
![]() ![]() They are not perfect photos I know but I hope it helps. Cheers Kevin |
![]() |
|
|