|
|
#1
05-01-12, 11:02
|
|||
|
|||
Flare Box Mounting Details
Can someone please help me with the details of the mounting bracket for mounting the flare box to the engine cover in the riveted U.C.
Here is a picture of the holes in the side of my recently aquired original, early flare box with leather strap. Thanks to Robin Beale for swapping flare boxes with me.
__________________
Bluebell Carrier Armoured O.P. No1 Mk3 W. T84991 Carrier Bren No2.Mk.I. NewZealand Railways. NZR.6. Dodge WC55. 37mm Gun Motor Carriage M6 Jeep Mb #135668 So many questions.... 
|
|
#2
05-01-12, 12:06
|
||||
|
||||
|
Here you go
__________________
Jordan Baker RHLI Museum, Otter LRC C15A-Wire3, 1944 Willys MB, 1942 10cwt Canadian trailer
|
|
#3
05-01-12, 16:04
|
||||
|
||||
|
Thanks Lynn & Jordan,
While it is a long way down the track before I even make up the armoured engine cover I do have an Aust flare box and can modify it accordingly. I used to know where the bracket was without the flarebox but it got bulldozed a few years back...  Cheers Phill
__________________
Ford GPW Jeep USMC Ambulance Willys MB Jeep Daimler Ferret Mk 1 Daimler Ferret Mk 2 Land Rover S2A Field Workshop Land Rover S3 FItted For Radio x2 Land Rover Perentie GS (SASR) International No 1 Mk 3 2.5 Ton 4x4 International No 1 Mk 4 2.5 Ton 4x4
|
|
#4
05-01-12, 20:41
|
|||
|
|||
|
Jordan
Your a ripper!. Not much left to ask. I guess the width is 2.0" Thankyou for your very helpful effort. Cheers.
__________________
Bluebell Carrier Armoured O.P. No1 Mk3 W. T84991 Carrier Bren No2.Mk.I. NewZealand Railways. NZR.6. Dodge WC55. 37mm Gun Motor Carriage M6 Jeep Mb #135668 So many questions....
|
|
#5
05-01-12, 20:49
|
||||
|
||||
|
I'll check on the weekend about the width. As for the internals mine came from and Aussie one. It fit perfectly into my Cnd made one
__________________
Jordan Baker RHLI Museum, Otter LRC C15A-Wire3, 1944 Willys MB, 1942 10cwt Canadian trailer
|
|
#6
09-01-12, 05:56
|
||||
|
||||
|
Had a look in a local scrap heap where I thought the bracket had been but no luck. I do remember picking it up and wondering what needed so many rivets to hold to such a small bracket.
It may still turn up but unlikely Cheers Phill
__________________
Ford GPW Jeep USMC Ambulance Willys MB Jeep Daimler Ferret Mk 1 Daimler Ferret Mk 2 Land Rover S2A Field Workshop Land Rover S3 FItted For Radio x2 Land Rover Perentie GS (SASR) International No 1 Mk 3 2.5 Ton 4x4 International No 1 Mk 4 2.5 Ton 4x4
|
|
#7
31-07-12, 09:34
|
|||
|
|||
|
a bit later on
Jordan, can you tell me the width please. Cheers.
__________________
Bluebell Carrier Armoured O.P. No1 Mk3 W. T84991 Carrier Bren No2.Mk.I. NewZealand Railways. NZR.6. Dodge WC55. 37mm Gun Motor Carriage M6 Jeep Mb #135668 So many questions....
|
|
#8
31-07-12, 15:13
|
||||
|
||||
|
Sorry for missing that. It's going to be awhile before I can get that info. Just busy with works and new house and little time to play.
__________________
Jordan Baker RHLI Museum, Otter LRC C15A-Wire3, 1944 Willys MB, 1942 10cwt Canadian trailer
|
|
#9
10-11-13, 03:42
|
|||
|
|||
|
Jordan, Doug has asked for the bracket info, so I have revived the thread to get the last details from you, if we can have the width please?
 Doug, I hope this covers what you need. I haven't done mine yet.
__________________
Bluebell Carrier Armoured O.P. No1 Mk3 W. T84991 Carrier Bren No2.Mk.I. NewZealand Railways. NZR.6. Dodge WC55. 37mm Gun Motor Carriage M6 Jeep Mb #135668 So many questions....
|
|
#10
10-11-13, 04:02
|
|||
|
|||
|
Lynn,Jordan,
If we get the last bit of info. this should cover it. Thanks to both for great info. Doug
|
|
#11
10-11-13, 19:14
|
|||
|
|||
|
2"
5.0cm x 27.3cm or closer to 2" x 10.75"
|
|
#12
10-11-13, 19:19
|
|||
|
|||
|
Michael,
Thank you for filling in the remainder of the puzzle. Doug
|
|
#13
11-11-13, 22:46
|
||||
|
||||
|
Thanks for posting that info.
__________________
Jordan Baker RHLI Museum, Otter LRC C15A-Wire3, 1944 Willys MB, 1942 10cwt Canadian trailer
|
 |
|
|
Linear Mode
