Handbrake replacement

[Little Jo]

I would like to thank, Lynn, Cameron,Mike, Jordan and Lang for their advice and idea's regarding to my "Transmission Brake" fitting problem. I had a good look at all the suggestions, then sat back had a good look at the problem and then solved it.

I made a simple surgical cut approx. 50mm x 20mm in the floor and then dropped the curved hooked bolt straight through, put the two springs on as the bolt came down and problem solved. The whole operation to put the brake back together, including the cutting out, took less then half an hour. No agro and no neighbours complaints about colourful language. I made a cover for the hole for any future use.

Thanks again guys for your input.

Little Jo
Tony Van Rhoda