Driveline
If I could post the pics I could show you how I did the drive-line. The original plan of using the second tranny was a bust when I did the math on the gearing ratio it worked out to a very slow machine. I used an engine and trans out of a 1996 Jeep Cherokee (4L inline 6cyl) and left the transfer case attached. This machine runs on the front wheel drive portion of the T case and has plenty of power and speed. I will likely do another one in the future but need to decide on a model of tank..... This one is on a T16 chassis so the steering was no issue as it is already tiller bars. The driving in reverse on the diff only worries me in that the steering brakes are "grabbing" in the wrong direction. Any thoughts on this are welcome.
|
17-09-15, 03:06
Similar Threads
Threaded Mode