Armour Dreams

[Jonathan Moore]

Evening All,

Things have been happening rather slowly at the moment due to influences outside my control but i am making progress.

I have managed to get the throttle fabricated and the linkage made up to a point but I need to complete some other items before I can connect it all up to the engine. The original linkage, as far as I can ascertain, was a series of steel rods routed around the front and over the gearbox and then a steel cable, in conduit, from there to the engine. It would be difficult to replicate that on mine, as the steering box takes up a lot more space, so I have used a cable from a cam on the end throttle shaft, up along the side of the steering box to an intermediate shaft, across the top of the steering box and then eventually to the engine.