LP2 steering measurements

[Rob Dyba]

Hello all, assistance required to reproduce some LP2 carrier steering parts- I require the outter diameter of the bearing sleeves on the cross axle rollers (the bearings were pressed into the sleeves & then fitted to mounts on the cross axle for track warping). I also require accurate measurments for the cam warping plate as all the steering parts on my LP2 are rusted almost beyond recognition. CAD drawings would be ideal or a non-rusty examble of either of these components would be great. I am trying to reproduce factory parts so if anyone down the track requires these parts I will have measurments to hand to reproduce factory spec parts as required. can anybody assist?????mMy carrier has suffered extensive floor rust- I am reproducing all of the floor yokes should anybody require some of these. But the track warping parts are almost beyond recognition-any body able to assist?????

Rob

P.S. tech tip- the castellated nut on top of the cam plate is available of the shelf at any good mini repair shop- exactly the same as the front hub nut on a mini cooper "s" type fitted with disc brakes- i have a bucket full for anybody that requires one.