|
|
|
|
#1
22-09-11, 03:56
|
|||
|
|||
How does it work.....
Grant....any idea of how it is connected...... are we talking about the hot wire from the ignition dash switch to the two screw terminals on top of the coil.....? so it fits between the switch and the coil..... and on your cab 13 the coil was isolated inside a metal container.... am i correct..?
Hum !!!! Bob
__________________
Bob Carriere....B.T.B C15a Cab 11 Hammond, Ontario Canada 
|
|
#2
22-09-11, 04:05
|
||||
|
||||
|
Thanks Guys, Now the 100 dollar question is where did it get mounted?
__________________
42 Slat grill 43 Ford gpw 44 C15A Wire 5
|
|
#3
22-09-11, 04:32
|
|||
|
|||
|
Quote:
There should be 2 holes lining up with the mount. On the other side of the frame from where your left foot would rest on the side. That should be perfectly clear if we agree on what is the cowl and front clip and left foot. 
|
|
#4
22-09-11, 04:36
|
||||
|
||||
|
Again Thanks guys and thanks Harry, This i will check out in the am.
__________________
42 Slat grill 43 Ford gpw 44 C15A Wire 5
|
|
#5
22-09-11, 10:35
|
|||
|
|||
|
Filter
If it is opened up it will have about 5 condensors in it. The Canadian UC had a very similar unit for the generator. The American Jeeps and Dodge all had filter units std from the factory.
__________________
Bluebell Carrier Armoured O.P. No1 Mk3 W. T84991 Carrier Bren No2.Mk.I. NewZealand Railways. NZR.6. Dodge WC55. 37mm Gun Motor Carriage M6 Jeep Mb #135668 So many questions....
|
|
#6
27-09-11, 05:55
|
|||
|
|||
the Ford lynx had the same radio suppressor in it for the radio to keep down the noise. So it was used in most vehicles that had radios
Old Boy Stew
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
