MLU FORUM  

Go Back   MLU FORUM > MILITARY VEHICLES > The Carrier Forum

Notices

Reply
 
Thread Tools Display Modes
  #1  
Old 04-10-11, 01:05
andrew honychurch andrew honychurch is offline
Registered User
 
Join Date: May 2010
Location: Kent, Great Britain
Posts: 362
Default

hi Rich. all ok I hope? I did not have to go to the trouble of bending the pipe as yet, but there may be a need soon. The pipes were serviceable but maybe i will need some help in the future. Fingers crossed for an oil free belly! They should be ok, now. I can always replace with rubber if needs be though thx
Reply With Quote
  #2  
Old 04-10-11, 01:20
RichardT10829's Avatar
RichardT10829 RichardT10829 is offline
Richard Harrison
 
Join Date: Nov 2008
Location: Cullercoats Newcastle Upon Tyne United Kingdom
Posts: 3,069
Default

no probs, i saw some stainless pipework bent up by packing it full of silver sand (rammed full) crimp the ends of the pipe then anneal the metal... then slowly start to bend it to shape.. the process is the same for copper too... was really interesting to watch !

glad its coming together for you
__________________
is mos redintegro

__5th Div___46th Div__
1942 Ford Universal Carrier No.3 MkI*
Lower Hull No. 10131
War Department CT54508 (SOLD)
1944 Ford Universal Carrier MkII* (under restoration).
1944 Morris C8 radio body (under restoration).
Reply With Quote
  #3  
Old 05-10-11, 16:55
andrew honychurch andrew honychurch is offline
Registered User
 
Join Date: May 2010
Location: Kent, Great Britain
Posts: 362
Default Engine running

been experimenting with YouTube so here is the clip of the engine running but sadly the true sound doesnt come out. May try with a proper video camera.

http://www.youtube.com/watch?v=uqjmeAIlxF0
Reply With Quote
  #4  
Old 05-10-11, 17:35
horsa's Avatar
horsa horsa is offline
David Gordon
 
Join Date: Nov 2005
Location: Lorena, Texas, USA
Posts: 619
Default

Looks to be coming together nicely. For the radiator shroud, check with Shaver in Arizona as he had made reproductions of the two narrow strips that go along the sides of the radiator and the armour. Won't fix your problem for boxing in the fan area but at least it would force the air to be pulled in through the radiator and not around it.
__________________
David Gordon - MVPA # 15292
'41 Willys MB British Airborne Jeep
'42 Excelsior Welbike Mark I
'42 BSA M20 Motorcycle
'43 BSA Folding Military Bicycle
'43 BSA M20 Motorcycle
'44 Orme-Evans Airborne Trailer No. 1 Mk. II
'44 Airborne 100-Gallon Water Bowser Trailer
'44 Ford T-16 Universal Carrier
'44 Jowett Cars 4.2-Inch Towed Mortar
'44 Daimler Scout Car Mark II
'45 Studebaker M29C Weasel
Reply With Quote
  #5  
Old 06-10-11, 08:31
andrew honychurch andrew honychurch is offline
Registered User
 
Join Date: May 2010
Location: Kent, Great Britain
Posts: 362
Default

I will drop Rod a mail and see what he has. I do have the patterns for these and can make them I think quite easily. Will check. thanks
Reply With Quote
  #6  
Old 06-10-11, 11:15
eddy8men eddy8men is offline
AKA Rick Wedlock
 
Join Date: Dec 2009
Location: manchester
Posts: 715
Default

i like the youtube footage, now the engines in and running it almost looks finished
when do you think you'll be able to test drive it ?

rick
__________________
_______________________
1941 mk1 mortar Carrier
1941 Mk1* Carrier
1942 Mk1* Carrier
1943 T16 Carrier
1945 Mk3 Dingo
1941 Mk3 Covenanter
1941 Mk4 Churchill AVRE (now sold)
1944 Mk6 Cromwell (now sold)
1952 Mk3 Centurion
1952 ARV Centurion
1952 ARV Centurion
1953 Mk3 Centurion (breaking)
Reply With Quote
  #7  
Old 06-10-11, 19:39
andrew honychurch andrew honychurch is offline
Registered User
 
Join Date: May 2010
Location: Kent, Great Britain
Posts: 362
Default

well I am hoping to get it sorted for a run this weekend. But its been running on temporary electrics and fuel and I need to tighten the tracks etc. So all in all I have a few hours of fiddling to get it going.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +2. The time now is 10:34.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © Maple Leaf Up, 2003-2016