|
|
#5
18-10-11, 21:38
|
|||
|
|||
2 inch hole
Hole is 2 inches diameter with the center of the hole 2 inches in from the end and centered vertically. Bolt hole for the jewel bracket are 3/8" ID and are centered fore and aft on the top and bottom of the bumper and centered to the 2 inch hole.
Hope that helps Phil
__________________
Phil Waterman `41 C60L Pattern 12 `42 C60S Radio Pattern 13 `45 HUP http://canadianmilitarypattern.com/ New e-mail Philip@canadianmilitarypattern.com 
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode