Chevrolet C8A-HUP?

[RichCam]

Bruce,

Thank you for the information. The HUW designation would explain the square frame that remains on the rear chassis and the square window at the back of the cab. With regards to the data plate, let me see what I can do. I will try and get a better picture of the door numbers.

Regards, Richard

[Bob Carriere]

Nov. 3rd 1942...... an early model with the rectangular hatch....

Passenger side door has the cab 13 canvass window brackets...... could the doors have been transplanted.

If you go back... see if you can take pictures of the rear frame section...

Wait until Rob see that posting....

Bob

[RichCam]

Guys,

Here is a couple of more pictures of the HUW. I have purchased the HUW and it will be delivered to my shop early in 2012. Let me know if I can help with other HUW restorations.

Regards, Richard

[Bob Carriere]

...too bad some twit left the air filter off the carby...... looks like a later 235 with the rochester B carb.

Keep us posted of your progress.......and pictures for us that can't read.

Bob

[RichCam]

Bob & Bruce,
Correct me if I'm wrong, but is this GMC a HUW also? I apologize for the quality of the pictures. I can probably get better information shortly.
Regards, Richard

[Grant Bowker]

It is one of the Heavy Utility series, whether HUA, HUW, HUP or Machinery Z (Light) I am not sure. The photo looks like there might be a fold down flap on the left side that might help to decide which sub-type it is. Anything you can add about the interior fittings will also help to sort it out.

[Bruce Parker (RIP)]

Originally Posted by Bob Carriere

...too bad some twit left the air filter off the carby...... looks like a later 235 with the rochester B carb.

Keep us posted of your progress.......and pictures for us that can't read.

Bob

100% it's a wireless, and a 1944 version with the recess for the spare tire on the right. It is up for grabs too, or even the data plates? It's a long, complicated story, but those plates, rather than the 1942 plates earlier in this thread would make two HUW owners VERY happy, not to mention two trucks that could display their correct data.

Does this HUW have anything left on the inside?

[RichCam]

Bruce, I checked with the owner of the late model HUW and he isn't willing to part with it. He said that I could take better pictures next time I am by. I will keep an eye on it but it might be another couple of years....
Richard

[Bruce Parker (RIP)]

Originally Posted by RichCam

Bruce, I checked with the owner of the late model HUW and he isn't willing to part with it. He said that I could take better pictures next time I am by. I will keep an eye on it but it might be another couple of years....
Richard

Thanks, that would be great.